4-rotor Renesis(?)
#26
Rotary Powered Countryboy
I wouldn't care about gas milegage on that hog the would b crazy even to just trailer to the show and start it up and use a tank....it would b bad ***
#27
The 337
Join Date: Jul 2008
Location: Lafayette, LA
Posts: 1,282
Likes: 0
Received 0 Likes
on
0 Posts
#30
Imagine that;
nice body, like furai
3seated like mclaren f1
a motor same as above or 4rotor made from titanium-magnisium alloy
compression 14-15:1 (maybe turbocharged!!!) using biofuel
red line screaming at 15000rpm (easy for a rotary made from those materials)
RWD or 80-20 R-F
flippad 7spd gearbox
top speed 260+ mph
0-60 about 2.5
I WANT IT (like i'll ever gona have it )
dream is over...
Really IS there ANY way to change the compression of a rotary?
nice body, like furai
3seated like mclaren f1
a motor same as above or 4rotor made from titanium-magnisium alloy
compression 14-15:1 (maybe turbocharged!!!) using biofuel
red line screaming at 15000rpm (easy for a rotary made from those materials)
RWD or 80-20 R-F
flippad 7spd gearbox
top speed 260+ mph
0-60 about 2.5
I WANT IT (like i'll ever gona have it )
dream is over...
Really IS there ANY way to change the compression of a rotary?
#31
Out of NYC
iTrader: (1)
Imagine that;
nice body, like furai
3seated like mclaren f1
a motor same as above or 4rotor made from titanium-magnisium alloy
compression 14-15:1 (maybe turbocharged!!!) using biofuel
red line screaming at 15000rpm (easy for a rotary made from those materials)
RWD or 80-20 R-F
flippad 7spd gearbox
top speed 260+ mph
0-60 about 2.5
I WANT IT (like i'll ever gona have it )
dream is over...
Really IS there ANY way to change the compression of a rotary?
nice body, like furai
3seated like mclaren f1
a motor same as above or 4rotor made from titanium-magnisium alloy
compression 14-15:1 (maybe turbocharged!!!) using biofuel
red line screaming at 15000rpm (easy for a rotary made from those materials)
RWD or 80-20 R-F
flippad 7spd gearbox
top speed 260+ mph
0-60 about 2.5
I WANT IT (like i'll ever gona have it )
dream is over...
Really IS there ANY way to change the compression of a rotary?
#33
"the Furai is sports car concept based on an American Le Mans Series (ALMS) racing car. The car utilizes the Courage C65 chassis the company campaigned in the ALMS series two seasons ago, and it is equipped with a 450 HP three-rotor rotary engine that runs on E100 Ethanol"
http://carscoop.blogspot.com/2007/12...r-detroit.html
So mazda DID made new rotors for higher compression... hmmm.. intresting...
And only for furai?...
http://carscoop.blogspot.com/2007/12...r-detroit.html
So mazda DID made new rotors for higher compression... hmmm.. intresting...
And only for furai?...
#34
#36
Administrator
"the Furai is sports car concept based on an American Le Mans Series (ALMS) racing car. The car utilizes the Courage C65 chassis the company campaigned in the ALMS series two seasons ago, and it is equipped with a 450 HP three-rotor rotary engine that runs on E100 Ethanol"
http://carscoop.blogspot.com/2007/12...r-detroit.html
So mazda DID made new rotors for higher compression... hmmm.. intresting...
And only for furai?...
http://carscoop.blogspot.com/2007/12...r-detroit.html
So mazda DID made new rotors for higher compression... hmmm.. intresting...
And only for furai?...
#37
Boosted Kiwi
iTrader: (2)
Not a renesis but one of these is going into an rx8 drift car at the moment
http://www.trademe.co.nz/Trade-Me-Mo...-192555367.htm
That's about 14k US atm
http://www.trademe.co.nz/Trade-Me-Mo...-192555367.htm
That's about 14k US atm
#38
The 337
Join Date: Jul 2008
Location: Lafayette, LA
Posts: 1,282
Likes: 0
Received 0 Likes
on
0 Posts
Not a renesis but one of these is going into an rx8 drift car at the moment
http://www.trademe.co.nz/Trade-Me-Mo...-192555367.htm
That's about 14k US atm
http://www.trademe.co.nz/Trade-Me-Mo...-192555367.htm
That's about 14k US atm
#39
Registered
4-rotor Renesis will be allsome
Psychopath you should do it, any thing is possible if you have the time and money
i am not to sure if this is a renesis 4 rotor but i saw this picture in japanese website
it called RENESIS 26C
Psychopath you should do it, any thing is possible if you have the time and money
i am not to sure if this is a renesis 4 rotor but i saw this picture in japanese website
it called RENESIS 26C
The following users liked this post:
Harrod19 (01-11-2023)
#40
Administrator
hahahahah thats an April Fools joke by Dan Mazzela over at Rotarynews.com from 2006
http://rotarynews.com/node/view/785
thats a 26b from the Lemans cars
http://rotarynews.com/node/view/785
thats a 26b from the Lemans cars
#46
Thank you yushinrt !
I 'll probably go for it, but i have something else in mind (and papers) for now...
TIME and money (that can be solved) are my drawbacks for now.
ROTARY IS THE BEST!
Does anyone knows the efficiency of a rotary engine compared to a piston eng.?
I 'll probably go for it, but i have something else in mind (and papers) for now...
TIME and money (that can be solved) are my drawbacks for now.
ROTARY IS THE BEST!
Does anyone knows the efficiency of a rotary engine compared to a piston eng.?
The following users liked this post:
yomomspimp06 (09-14-2020)
The following users liked this post:
Harrod19 (01-11-2023)
#50
No respecter of malarkey
iTrader: (25)
nicer followup though ... and thank you Loki, my itching fingers were dying all day long keeping from responding to that reply. 🤣
and to answer the question; anything is possible, how much are you willing to pay for a questionable result?
.
and to answer the question; anything is possible, how much are you willing to pay for a questionable result?
.
Last edited by TeamRX8; 09-11-2020 at 08:12 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Carl H
Series I Aftermarket Performance Modifications
9
03-27-2008 01:06 AM
ghlisa
Series I Major Horsepower Upgrades
68
02-13-2008 11:40 PM
20bfd3s
Series I Major Horsepower Upgrades
17
10-20-2006 10:28 AM