Notices
Series I Tech Garage The place to discuss anything technical about the RX-8 that doesn't fit into any of the categories below.

2 SparkPlug Defoulers in O2 sensor and STILL have CEL!

Old Nov 13, 2005 | 05:34 PM
  #1  
RX8SpdDmn's Avatar
Thread Starter
Registered
 
Joined: Oct 2004
Posts: 329
Likes: 0
From: Florence, KY
2 SparkPlug Defoulers in O2 sensor and STILL have CEL!

I've added a second Spark Plug Defouler to my O2 sensor to bring it out of the exhaust stream, since I don't have a cat, and I STILL have a Check Engine Light!

I disconnected my battery for a while to reset the computer, but in about 19 miles, the CEL came back on.

Does anyone have any other suggestions???
This is really frustrating.
Reply
Old Nov 13, 2005 | 06:19 PM
  #2  
adrian-1's Avatar
Ex- member.
 
Joined: Jan 2004
Posts: 1,694
Likes: 1
From: Austin, TX
The O2 foolers don't work on our cars. A couple of members have had success with an O2 sim like the one sold here.
Reply
Old Nov 13, 2005 | 06:28 PM
  #3  
StealthTL's Avatar
Metatron
iTrader: (1)
 
Joined: Mar 2003
Posts: 7,286
Likes: 184
From: A Pacific Island.
What made you think it would work......

The Casper foolers won't work, and the little extender pieces had NO chance of ever working in the first place.

The ECU tests the secondary sensor by sending a pattern of rich/lean pulses - if the pulsed results don't show up in the secondary data, it's CEL time.
Casper foolers can send a fake stream of "OK" data, but obviously can't relay any test pulses.
Plug extenders, (no matter how many used!) would have no effect, except possibly to trigger a "sensor heater failure" CEL.

S
Reply
Old Nov 13, 2005 | 06:31 PM
  #4  
adrian-1's Avatar
Ex- member.
 
Joined: Jan 2004
Posts: 1,694
Likes: 1
From: Austin, TX
Has anyone ever read what CEL is thrown up?
Reply
Old Nov 13, 2005 | 10:01 PM
  #5  
RX8 Brunei's Avatar
Rotary Lover
 
Joined: Nov 2004
Posts: 467
Likes: 2
From: Brunei: Where Ricers show off their fugly rides
Originally Posted by RX8SpdDmn
I've added a second Spark Plug Defouler to my O2 sensor to bring it out of the exhaust stream, since I don't have a cat, and I STILL have a Check Engine Light!

I disconnected my battery for a while to reset the computer, but in about 19 miles, the CEL came back on.

Does anyone have any other suggestions???
This is really frustrating.
U better ask Rotarygod & other members about this. I afraid sooner or later u'll be encountering the problem that i had right now. be4 u replace with the catless pipe, did u ever reset ECU & KAM?? disconnecting the battery won't reset those two things. Juz my 2 cents.
Reply
Old Nov 14, 2005 | 07:55 AM
  #6  
RX8SpdDmn's Avatar
Thread Starter
Registered
 
Joined: Oct 2004
Posts: 329
Likes: 0
From: Florence, KY
Originally Posted by RX8 Brunei
U better ask Rotarygod & other members about this. I afraid sooner or later u'll be encountering the problem that i had right now. be4 u replace with the catless pipe, did u ever reset ECU & KAM?? disconnecting the battery won't reset those two things. Juz my 2 cents.
No, I didn't reset those things. What would that have done and how could I do it?

Other people have had success with the spark plug defoulers, but, now I'm hearing it won't work? Is there NO way around this?
Reply
Old Nov 15, 2005 | 03:13 AM
  #7  
TeamRX8's Avatar
Registered
iTrader: (25)
 
Joined: Apr 2005
Posts: 26,936
Likes: 2,141
you need this one instead:

https://www.rx8club.com/series-i-tech-garage-22/midepipe-cel-problem-fixed-72790/
Reply
Old Nov 15, 2005 | 08:45 AM
  #8  
RX8SpdDmn's Avatar
Thread Starter
Registered
 
Joined: Oct 2004
Posts: 329
Likes: 0
From: Florence, KY
Originally Posted by TeamRX8
Mine does the same thing, except it brings the O2 sensor out even furthur. Can you rationalize why this one would be better?
Also, the one you showed doesn't have any flats on it to tighten up to the O2 sensor with. I could see you wrenching it in (via the flats on the O2 sensor) and then trying to take it out, only to have the adapter stuck in the midpipe, at which time you'd have to grind flats on it for a wrench to grab onto.
Reply
Old Nov 15, 2005 | 11:22 AM
  #9  
TeamRX8's Avatar
Registered
iTrader: (25)
 
Joined: Apr 2005
Posts: 26,936
Likes: 2,141
Originally Posted by RX8SpdDmn
Mine does the same thing, except it brings the O2 sensor out even furthur. .

well apparently it doesn't and isn't. Did you follow the link to the original thread, it's not actually a positioning issue, PM the people who claim it works and see what they say, none of the naysayers have actually tried it

https://www.rx8club.com/series-i-tech-garage-22/solution-cel-midpipes-racepipes-64222/

Last edited by TeamRX8; Nov 15, 2005 at 11:29 AM.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
masonflint44
New Member Forum
6
Nov 30, 2014 05:14 PM
patrick_andraste
NW RX-8 Forum
15
May 9, 2012 10:06 AM
Pinhy
Series I Tech Garage
40
Jan 21, 2010 06:58 AM
RX8SpdDmn
Series I Tech Garage
2
Oct 24, 2005 10:32 AM


Thread Tools
Rate This Thread
Rate This Thread:
You have already rated this thread Rating: Thread Rating: 0 votes,  average.


All times are GMT -5. The time now is 07:45 AM.