Pettit Super Charger Owners
#1136
Now turbo!
I've finally read this entire thread. It took me about 4 hours total (with bathroom breaks, etc...).
Anyway, I've learned 2 things:
1. I want FI
2. There are several members on this forum that act like children.
I'm also a member of a Honda CBR forum, and I've NEVER seen anyone over there fight like you people do.
Anyway, I've learned 2 things:
1. I want FI
2. There are several members on this forum that act like children.
I'm also a member of a Honda CBR forum, and I've NEVER seen anyone over there fight like you people do.
#1137
So, basically...they do not survive long enough to bicker...
heh
#1138
Banned
iTrader: (3)
I've finally read this entire thread. It took me about 4 hours total (with bathroom breaks, etc...).
Anyway, I've learned 2 things:
1. I want FI
2. There are several members on this forum that act like children.
I'm also a member of a Honda CBR forum, and I've NEVER seen anyone over there fight like you people do.
Anyway, I've learned 2 things:
1. I want FI
2. There are several members on this forum that act like children.
I'm also a member of a Honda CBR forum, and I've NEVER seen anyone over there fight like you people do.
There is substantially more superstition than supercharging in here.
#1140
Registered User
iTrader: (1)
Join Date: Jun 2007
Location: Houston, TX
Posts: 1,112
Likes: 0
Received 0 Likes
on
0 Posts
The BeatRush Aluminum Under Panel has a small opening towards the front and three slots/cuts just under the oil pan location. I drove the car this morning to work and I did not notice any changes in temperatures. I’m running a digital engine temperature gauge and it is easier (for me) to keep track on the engine temps.
Last edited by marsredr100; 01-10-2008 at 08:31 PM.
#1141
Registered
iTrader: (3)
So -you are monitoring the engine bay temps?
That is the area am curious about.i didnt think the engine temp itself would change-just the engine bay. But it may not--it conceivability could get better. Really interested in the trans brace.
Thanks for sharing all this!
oscd
That is the area am curious about.i didnt think the engine temp itself would change-just the engine bay. But it may not--it conceivability could get better. Really interested in the trans brace.
Thanks for sharing all this!
oscd
#1142
Surf Hard, Drive Hard
Join Date: Feb 2007
Location: Indialantic, Florida
Posts: 7,840
Likes: 0
Received 11 Likes
on
9 Posts
The BeatRush Aluminum Under Panel has a small opening towards the front and three slots/cuts just under the oil pan location. I drove the car this morning to work and I did not notice any changes in temperatures. I’m running a digital engine temperature gauge and it is easier (for me) to keep track on the engine temps.
You need to resize your pics to about 8x10 before you attach them as a thumbnail(via your own drive), cause when you click on them, they just open up at the same size.........Just for your information.
#1144
Registered User
iTrader: (1)
Join Date: Jun 2007
Location: Houston, TX
Posts: 1,112
Likes: 0
Received 0 Likes
on
0 Posts
Hooked on Meth Part II
I decided that if one methanol nozzle feels good……then two should better. Ahhhhh…
Seriously, I added an additional meth nozzle to the upper intake (past the SC) for a double shot. The first nozzle is a 225 ml/min and the second is 100 ml/min. Both nozzle spray at the same time. Took the car for a short trip and did not notice anything wrong. I will be doing another dyno soon and with this setup I will be able to change nozzles location/meth before SC only/meth after SC only/simultaneous meth spray. Only a dyno will show the best combination or nozzle location. I hope.
Stay tune.
Seriously, I added an additional meth nozzle to the upper intake (past the SC) for a double shot. The first nozzle is a 225 ml/min and the second is 100 ml/min. Both nozzle spray at the same time. Took the car for a short trip and did not notice anything wrong. I will be doing another dyno soon and with this setup I will be able to change nozzles location/meth before SC only/meth after SC only/simultaneous meth spray. Only a dyno will show the best combination or nozzle location. I hope.
Stay tune.
#1145
Surf Hard, Drive Hard
Join Date: Feb 2007
Location: Indialantic, Florida
Posts: 7,840
Likes: 0
Received 11 Likes
on
9 Posts
Much better....and damn, I wanna see how you can get on the dyno!
Hey, I may have missed it somewhere in all this madness, but who made you strut bracket on that side that goes to the master cylinder? I'm assuming you made it?
Hey, I may have missed it somewhere in all this madness, but who made you strut bracket on that side that goes to the master cylinder? I'm assuming you made it?
#1149
Surf Hard, Drive Hard
Join Date: Feb 2007
Location: Indialantic, Florida
Posts: 7,840
Likes: 0
Received 11 Likes
on
9 Posts
Thanks in advance
#1150
Registered User
iTrader: (1)
Join Date: Jun 2007
Location: Houston, TX
Posts: 1,112
Likes: 0
Received 0 Likes
on
0 Posts
Yes, I know, but I have the bar, so what was the mod? I'm trying to see what all I have to deal with as I move closer to pulling the trigger on getting the SC. I know that's the least of my worries, but I knew it was modded and wasn't sure if it was a whole new bracket on that side, or some minor mod?
Thanks in advance
Thanks in advance
Last edited by marsredr100; 01-10-2008 at 09:38 PM.