Pettit Super Charger Owners
12-15-2010, 12:56 PM
#8256
Rotary engine addict
Join Date: Jun 2008
Location: Guadeloupe (FWI)
Posts: 303
Likes: 0
Received 0 Likes
on
0 Posts
Hi Guys,
been on long time !
I had to read the entire posts until here !!!
so much things
by my side, nothing changed !
My car still do not work ... same **** (from 6month now) !
very very very hard time to start, idle to 3rd gear ok but after it's bullsh*t
BHR is helping me, i am waiting for the new fuel pump assembly.
After, I'll contact mazdamaniac to tune the car (has I got MSD coils)
I am done with pettit guys because they are not able to help.
If after the fuel pump It do not work : I burn it or I just put the car in a warehouse waiting for some years to see whatodo...sending it to banzai racing to install 20bT ? buying a supra ?
been on long time !
I had to read the entire posts until here !!!
so much things
by my side, nothing changed !
My car still do not work ... same **** (from 6month now) !
very very very hard time to start, idle to 3rd gear ok but after it's bullsh*t
BHR is helping me, i am waiting for the new fuel pump assembly.
After, I'll contact mazdamaniac to tune the car (has I got MSD coils)
I am done with pettit guys because they are not able to help.
If after the fuel pump It do not work : I burn it or I just put the car in a warehouse waiting for some years to see whatodo...sending it to banzai racing to install 20bT ? buying a supra ?
12-16-2010, 12:55 AM
#8259
I don't remember
Join Date: Jan 2007
Posts: 538
Likes: 0
Received 0 Likes
on
0 Posts
While I do read these posts for info, I can see why my wife doesn't, or see other women post in here. MM Ya Lesbian pics insult most women, grow up noob. ya act like a fkn teenager.
12-16-2010, 05:54 AM
#8261
Registered
Maybe there is a bit to be flipped on in the flash that fires all four when cranking?
Last edited by Rote8; 12-16-2010 at 05:58 AM.
12-16-2010, 10:29 AM
#8263
Rotary engine addict
Join Date: Jun 2008
Location: Guadeloupe (FWI)
Posts: 303
Likes: 0
Received 0 Likes
on
0 Posts
12-18-2010, 11:27 AM
#8264
Ok guys look at this.
https://www.rx8club.com/attachment.p...1&d=1292693002https://www.rx8club.com/attachment.p...1&d=1292693106
See the importance of a good vacuum to the oil pan AND getting your oil temps up to proper temperature for a length of time?
I am taking my engine out of course and it has been setting for some days, but i thought this would be interesting.
OD
https://www.rx8club.com/attachment.p...1&d=1292693002https://www.rx8club.com/attachment.p...1&d=1292693106
See the importance of a good vacuum to the oil pan AND getting your oil temps up to proper temperature for a length of time?
I am taking my engine out of course and it has been setting for some days, but i thought this would be interesting.
OD
12-18-2010, 05:34 PM
#8268
Registered User
iTrader: (1)
Join Date: Jun 2007
Location: Houston, TX
Posts: 1,112
Likes: 0
Received 0 Likes
on
0 Posts
Ok guys look at this.
https://www.rx8club.com/attachment.p...1&d=1292693002https://www.rx8club.com/attachment.p...1&d=1292693106
See the importance of a good vacuum to the oil pan AND getting your oil temps up to proper temperature for a length of time?
I am taking my engine out of course and it has been setting for some days, but i thought this would be interesting.
OD
https://www.rx8club.com/attachment.p...1&d=1292693002https://www.rx8club.com/attachment.p...1&d=1292693106
See the importance of a good vacuum to the oil pan AND getting your oil temps up to proper temperature for a length of time?
I am taking my engine out of course and it has been setting for some days, but i thought this would be interesting.
OD
BTW, I just changed my tranny RP gear oil to Redline MT-90 today. Going to take it for a spin tomorrow after my second radiator install and see if it made a difference with my 3rd to 4th hard shifting.
12-18-2010, 11:45 PM
#8272
I don't remember
Join Date: Jan 2007
Posts: 538
Likes: 0
Received 0 Likes
on
0 Posts
12-19-2010, 07:57 AM
#8274
not loosing any coolant? IDK?
I do remember when we pulled several oil pans while we were installing the mazmart oil pressure mod and we were surprised to find more of this stuff than we thought.
This is the most I have ever seen.
No steam out the tail pipe when running (after warm up).
Moon --I like that look---now the a/w coolant tank. Are you going to go outside the engine bay?
Juan has a trick setup.
OD
I do remember when we pulled several oil pans while we were installing the mazmart oil pressure mod and we were surprised to find more of this stuff than we thought.
This is the most I have ever seen.
No steam out the tail pipe when running (after warm up).
Moon --I like that look---now the a/w coolant tank. Are you going to go outside the engine bay?
Juan has a trick setup.
OD
12-19-2010, 08:22 AM
#8275
