One Last Help Req/ Greddy Turbo - Jet-air Line
#1
One Last Help Req/ Greddy Turbo - Jet-air Line
I figured out most of the vacume hoses that connect to the greddy turbo intake pipe
three of them all fit in
1. oil filler
2. metering oil nozzle
3. to the intake manifold?
but where the hell does the jet-air mixture line THAT GOES INTO THE AIRFILTER (AIRLYNX) come from?
please help, need pics
three of them all fit in
1. oil filler
2. metering oil nozzle
3. to the intake manifold?
but where the hell does the jet-air mixture line THAT GOES INTO THE AIRFILTER (AIRLYNX) come from?
please help, need pics
#2
I wanna rock! Rock!
Join Date: Jun 2005
Location: Monterey, CA
Posts: 576
Likes: 0
Received 0 Likes
on
0 Posts
Intake manifold. It provides a 'jet' of air to help with mixing the fuel and air.
BTW, do you have the new kit? If so you don't connect any hoses to the airinx filter. That one has been moved to the elbow-shaped compression pipe to fix the boost leak problem (the one that Mazsport fixed with a check valve). The oil filler hose and MOP/OMP hose still go to the suction nipples.
BTW, do you have the new kit? If so you don't connect any hoses to the airinx filter. That one has been moved to the elbow-shaped compression pipe to fix the boost leak problem (the one that Mazsport fixed with a check valve). The oil filler hose and MOP/OMP hose still go to the suction nipples.
#3
DID u ever figure out where the jet air line was. I would like to no cause it said to do that an all I have room for on my pipes is 2 nip holes. There isn't one on my blow off valve pipe an there's only 2 holes on my airinx pipe. So the three hoses connected to the stock intake box I put two hoses to the airinx pipe that run behind the altinator an just have a breather filter over the hose that came from the oil container. Is that right??
Thread
Thread Starter
Forum
Replies
Last Post
TotalAutoPerformance
Vendor Classifieds
12
10-17-2018 09:00 AM