yeah man. they are wondering who the creepsters are..

but they have to deal with it cause i'm the boss.

we'll be around fri too, no prob.

 

i have the ap and will ask Jeff to tune it

 

Jeff has a tune or two in his bag of tricks...............he could just give you one of mine

 

Where are you guys going to be Friday during the day? I would like to come up and visit. Plus I told Shaun I would test his compression, and... Dan may come down from Canada...

 

Nemesis8 can you do a compression check on my car too?!!

 

So where are the pics of the BHR girls cooking on the BBQ

 

we'll be at my office. 2220 lind ave sw renton wa 98057

gotta ask easy. he's in charge of pics

 

Yep

 

^saweeet!

 

omp and injectors are done. blower going on tomorrow.

i did see easy taking some pics but he might be drowned by now..

 

Dynho numbazzz!!!

 

Drowned?

 

sounds hot dude

 

hehe yup

 

how goes the build?

 

Is no news good news?

 

here's a pic of easy working on the oil filter relocation. looks baller by the way. i needed this mod long ago just cause it looks so cool. and it'll make filter changes a lot easier. somehow crh got the Mazda filter onto the Greddy relo kit that's supposed to take Toyota filters..



here's the engine bay. those coil harnesses are now extended to the fuse box so we can mount the BHR ignition up front to clear the blower. you can also see the blower pulley installed down below.

easy also removed like 9 of those plastic clips and zip ties plus a yard or so of electrical tape. we expect some good performance increases due to the weight reduction

 

Is he mounting it in the same area as mine?

 

Yes it will be in the same area. But Dondo does not have an airbox undertray. So mounting the kit will be,,,, interesting.

 

hey man i sold that thing for beer money. no wait, i sold it to buy more car parts.....

 

what is the ETA on this build ?
good work so far guys ...

 

tomorrow?

 

not a problem --just use the bolts holes that held the airbox etc in place on the cross beam
Insulate the wiring harness well as once mounted it will see a lot of radiator heat. So dont use regular electrical tape--the adhesive on it will melt and run! Yall probably knew that already.
Same with the TB wire.
May want to put some tape over those intake ports and the oil filter location before I have a friggen heart attack! lol. Ever seen the picture of a penny coming out of a rotor housing during a tear down? That would be my luck Not missing any parts are ya?
OD

 

crap - I have a hung caliper on the passenger rear. Need to tear it down 2nite. I'll be up there around noonish if I can fix my car.

 

dude we needed your advice an hour earlier! i documented the hunt for the missing piece though so you can witness it yourself: