Brettus turbo 111 (the ultimate Renesis turbo ?)
The following users liked this post:
jcbrx8 (08-30-2019)
#2004
Registered
Do you have a S1 because of the front end like I do. I don't really care for the changes they made on the S2.
That's what mine sounds like.(if I posted the link right). Just a few pops and I lil flame.
#2005
Do you have a S1 because of the front end like I do. I don't really care for the changes they made on the S2.
https://youtu.be/mBTK3n5_EaE
That's what mine sounds like.(if I posted the link right). Just a few pops and I lil flame.
https://youtu.be/mBTK3n5_EaE
That's what mine sounds like.(if I posted the link right). Just a few pops and I lil flame.
Sounds good ! I need to get a sound clip of mine at full boost , sounds way more aggressive than in that vid from about 12 psi up.
#2006
Registered
I'm up in the air on where to go with it. I don't think I want a turbo. Possibly SC someday. But for now I need to get my hands on either a good tuner or a AP.
#2008
Registered
#2009
As fuel consumption seemed to take a dive when I fitted blues to P1 , I decided to fit S2 Browns there instead . Better spray pattern plus a slight bump in capacity .
Be interesting to see if they make a difference . Pic has one red in there too to demonstrate the colour difference.
Be interesting to see if they make a difference . Pic has one red in there too to demonstrate the colour difference.
The following users liked this post:
sinkas (09-01-2019)
#2011
Registered
The following users liked this post:
Brettus (09-03-2019)
#2013
As fuel consumption seemed to take a dive when I fitted blues to P1 , I decided to fit S2 Browns there instead . Better spray pattern plus a slight bump in capacity .
Be interesting to see if they make a difference . Pic has one red in there too to demonstrate the colour difference.
Be interesting to see if they make a difference . Pic has one red in there too to demonstrate the colour difference.
#2014
Running brown/uncapped yellow/uncapped yellow ....
so that's 660/850/850 which experience tells me this will be good to around 430whp on E30 ..... but that's at max. duty.
One thing with aftermarket injectors is getting the latency tables correct . If it's wrong they wont output what they should.
so that's 660/850/850 which experience tells me this will be good to around 430whp on E30 ..... but that's at max. duty.
One thing with aftermarket injectors is getting the latency tables correct . If it's wrong they wont output what they should.
#2017
No respecter of malarkey
iTrader: (25)
The ID numbers are preprogrammed in the software and automatically inserted when you choose the specific injector size per stage in the fuel setup.
for his P1s though, I can’t remember if it had OE injectors listed or not. I put ID750s in the P1 position, which you can’t get those long body sizes any more, just the short body that won’t fit down in the iron opening.
for his P1s though, I can’t remember if it had OE injectors listed or not. I put ID750s in the P1 position, which you can’t get those long body sizes any more, just the short body that won’t fit down in the iron opening.
Last edited by TeamRX8; 09-18-2019 at 11:45 AM.
#2018
Yep team is right preprogrammed, they do have all the oem injectors and works well was using greens and browns for awhile but was only enough fuel for 7psi without it going to max duty on p2
#2020
Nope 6 injectors i thinks its mainly due to me not wanting over 80%duty and lower fuel pressure as drops to 50psi by high rpm, have fuel pressure sensor to compensate tho.
What fuel pump setup are u running?
What fuel pump setup are u running?
#2022
Interesting i have s2 assy with aem 320 flow should be very similar to your setup. I have flex fuel and pressure sensor inline with a 90 and 180 AN fitting wonder if thats causing significant restriction
#2023
Similar ...but different . I'd try it without the flex fuel sensor ...I've heard those can be restrictive . Otherwise , one of the reasons I never fitted my S2 fuel pump is that what I already had worked well. I know it's a better design for high g cornering but didn't think it would solve those same issues at high flow. Instead I just keep tank above 1/2 when at track.
#2024
Registered
Flex fuel sensor should be mounted on the return side of the FPR, and shouldn't be restricting anything since the FPR by design is a restriction.... Without a surge tank you will get that pressure drop when you start making power. I tried to make it all work with the stock assembly and failed. IMO
#2025
Flex fuel sensor should be mounted on the return side of the FPR, and shouldn't be restricting anything since the FPR by design is a restriction.... Without a surge tank you will get that pressure drop when you start making power. I tried to make it all work with the stock assembly and failed. IMO