Brettus turbo 11
11-09-2014, 01:20 AM
#1051
^Bought Porterfield R4-1 pads, very happy with those. The previous Hawk pads were useless.
01-16-2015, 04:10 AM
#1058
You can go straight to Dubai with those wheels
I went for the dark side
but i did a mistake by powder coating the hub of wheel on inside, not the best move, I now have a slight imbalance that I cant get rid of
I was concidering to try to machine off the coat of by taking it 0.5 - 1.0mm down, but I'm not sure if thats a good solution.
I went for the dark side
but i did a mistake by powder coating the hub of wheel on inside, not the best move, I now have a slight imbalance that I cant get rid of I was concidering to try to machine off the coat of by taking it 0.5 - 1.0mm down, but I'm not sure if thats a good solution.
.
05-13-2015, 05:30 PM
#1067
Yeah hand made .... getting together a dummy engine and hopefully an engine mount so most of it can be done off the car .
CAD ? you have to be joking ! Anyway .... lets wait to see if it actually works first LOL
CAD ? you have to be joking ! Anyway .... lets wait to see if it actually works first LOL
Last edited by Brettus; 05-13-2015 at 06:12 PM.
Greatness
05-14-2015, 04:11 PM
#1073
05-15-2015, 12:09 AM
#1075
Driving my unreliable rx8
That's right where mine sits. I had to put the velute almost straight down then rotate the cold side very close to the engine, but then I went with a smaller cold side velute and had plenty of room up front.
Don't forget about the 1/2" or so that the transmission sticks out past the engine right there. If you have an extra shield that fits there it will help with the fitting.
Don't forget about the 1/2" or so that the transmission sticks out past the engine right there. If you have an extra shield that fits there it will help with the fitting.