3 Rotor RX8 PR
02-13-2006, 10:22 AM
#376
Originally Posted by rx8ultra
"Quote:
Originally Posted by rgonza
"At 14 PSI boost and reving it at 10,000 RPM is around 15 MPG or less but your able to producing around 750 HP at the crank. There are no Subis STI, Mitsu EVOl, Z06,Ferrraris,Porsh, lambo, bmw M at front of you."
Regards
Rgonza
You want to bet? There are friends(Many) with Porsches 996 Twin Turbos( chipped ECU'S and K24 hybrid Turbos-Street cars) that will leave that three rotor rx8 eating dust !!!!!! They will put those 750hp not at the crank but at the wheel !!!!! There is even one of them that just dusted a Twin Turbo Viper(1000hp) and I'm talking about street cars !!! What makes you think that those cars cant be modded just like your RX8? and the good thing is that they will last years of heavy driving without breaking apart !!!
Originally Posted by rgonza
"At 14 PSI boost and reving it at 10,000 RPM is around 15 MPG or less but your able to producing around 750 HP at the crank. There are no Subis STI, Mitsu EVOl, Z06,Ferrraris,Porsh, lambo, bmw M at front of you."
Regards
Rgonza
You want to bet? There are friends(Many) with Porsches 996 Twin Turbos( chipped ECU'S and K24 hybrid Turbos-Street cars) that will leave that three rotor rx8 eating dust !!!!!! They will put those 750hp not at the crank but at the wheel !!!!! There is even one of them that just dusted a Twin Turbo Viper(1000hp) and I'm talking about street cars !!! What makes you think that those cars cant be modded just like your RX8? and the good thing is that they will last years of heavy driving without breaking apart !!!
The cost of those cars is not on par with that of the 3 rotor he is building. Dollar for dollar, you can't come close to matching it.
02-13-2006, 10:37 AM
#377
Registered
Comparing to other cars is a losing argument regardless of which side you take. Why? There is ALWAYS a faster car out there somewhere. Get used to it. Here's another hard to accept fact. It's relatively easy to make almost any car on the planet fast. It's an eye opening experience the first time you see a quiet, rusted out mid 80's Dodge Van unload a half a dozen kids, line up at the strip and then see it blast a low 11 second quarter mile blowing away a Corvette. It's happened! Dollar for dollar, he had less into it. That too is a poor excuse as not everyone out there cares about what you need to spend to go fast. The most important thing is that you have the car you want, setup the way you want it. It doesn't matter how much it costs, how much you could have had another car for, or if anything else out there is faster than it. I have more respect for the person who is happy with what they have than I do with the person who has something to prove. That person will never get any respect from me.
02-13-2006, 11:04 AM
#379
Registered User
Join Date: Feb 2005
Location: Manati, Puerto Rico
Posts: 607
Likes: 0
Received 0 Likes
on
0 Posts
rx8wannahave,
If you have plans to make a 3 rotor there is not big difference on $$$ from NA to FI........
or you can maked NA and in the future goes FI.
If you likes NA engines you can make a 350hp 3 rotor without problem.
Robert is the guy that can make you a 3 rotor you need to contact him.
If he decides to make another 3 rotor I'm goin to help him finding all the parts
and anything he needs from me.
I'm goin to see Robert today if everything goes like we think my car would be on the street
this thursday!
Manuel
If you have plans to make a 3 rotor there is not big difference on $$$ from NA to FI........
or you can maked NA and in the future goes FI.
If you likes NA engines you can make a 350hp 3 rotor without problem.
Robert is the guy that can make you a 3 rotor you need to contact him.
If he decides to make another 3 rotor I'm goin to help him finding all the parts
and anything he needs from me.
I'm goin to see Robert today if everything goes like we think my car would be on the street
this thursday!
Manuel
02-13-2006, 01:01 PM
#380
Follower of CHRIST!!!!!!!
Join Date: Aug 2004
Location: Planet Earth
Posts: 3,241
Likes: 0
Received 0 Likes
on
0 Posts
Gracias!
350-400HP is all I would want, but do you lose your safety features on a 20B conversation? What type of stuff should I know about or what would change if I made such a move?
Like AC, Air bags, ABS, etc?
I love what you all have done with your MONSTER 20B...but my goal would be to keep it as livable as possible while gaining alot more power.
Thanks!
350-400HP is all I would want, but do you lose your safety features on a 20B conversation? What type of stuff should I know about or what would change if I made such a move?
Like AC, Air bags, ABS, etc?
I love what you all have done with your MONSTER 20B...but my goal would be to keep it as livable as possible while gaining alot more power.
Thanks!
02-13-2006, 01:40 PM
#381
Rob gonzalez
Thread Starter
Join Date: Dec 2005
Location: Naranjito, Puerto Rico
Posts: 356
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by rx8ultra
"Quote:
Originally Posted by rgonza
"At 14 PSI boost and reving it at 10,000 RPM is around 15 MPG or less but your able to producing around 750 HP at the crank. There are no Subis STI, Mitsu EVOl, Z06,Ferrraris,Porsh, lambo, bmw M at front of you."
Regards
Rgonza
You want to bet? There are friends(Many) with Porsches 996 Twin Turbos( chipped ECU'S and K24 hybrid Turbos-Street cars) that will leave that three rotor rx8 eating dust !!!!!! They will put those 750hp not at the crank but at the wheel !!!!! There is even one of them that just dusted a Twin Turbo Viper(1000hp) and I'm talking about street cars !!! What makes you think that those cars cant be modded just like your RX8? and the good thing is that they will last years of heavy driving without breaking apart !!!
Originally Posted by rgonza
"At 14 PSI boost and reving it at 10,000 RPM is around 15 MPG or less but your able to producing around 750 HP at the crank. There are no Subis STI, Mitsu EVOl, Z06,Ferrraris,Porsh, lambo, bmw M at front of you."
Regards
Rgonza
You want to bet? There are friends(Many) with Porsches 996 Twin Turbos( chipped ECU'S and K24 hybrid Turbos-Street cars) that will leave that three rotor rx8 eating dust !!!!!! They will put those 750hp not at the crank but at the wheel !!!!! There is even one of them that just dusted a Twin Turbo Viper(1000hp) and I'm talking about street cars !!! What makes you think that those cars cant be modded just like your RX8? and the good thing is that they will last years of heavy driving without breaking apart !!!
Inmagine 1300 RWP From just 2.0 liter. i dont need High $$$$$$$ porshe simple i beat then in the street and the track. I heva a friend of mine that's hes own a 911 twin turbos i leave him in the dust and he say that he got 700 HP at wheels too. DO you whant to bet???? Just bring this car to Puerto Rico HEHEHE.
Do you not hear about Marcos Acosta Rx8 Versus High mods Porche race?
If you dont know!!!!
The Marcos Acosta Rx8 Win this race
Last edited by rgonza; 02-13-2006 at 01:50 PM.
02-13-2006, 01:42 PM
#382
Rob gonzalez
Thread Starter
Join Date: Dec 2005
Location: Naranjito, Puerto Rico
Posts: 356
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by rx8wannahave
Gracias!
350-400HP is all I would want, but do you lose your safety features on a 20B conversation? What type of stuff should I know about or what would change if I made such a move?
Like AC, Air bags, ABS, etc?
I love what you all have done with your MONSTER 20B...but my goal would be to keep it as livable as possible while gaining alot more power.
Thanks!
350-400HP is all I would want, but do you lose your safety features on a 20B conversation? What type of stuff should I know about or what would change if I made such a move?
Like AC, Air bags, ABS, etc?
I love what you all have done with your MONSTER 20B...but my goal would be to keep it as livable as possible while gaining alot more power.
Thanks!
02-13-2006, 02:44 PM
#383
Follower of CHRIST!!!!!!!
Join Date: Aug 2004
Location: Planet Earth
Posts: 3,241
Likes: 0
Received 0 Likes
on
0 Posts
Yes your AC Air Bags, Abs still intac, with the exeption of DCS And Cruise Control.
02-13-2006, 04:11 PM
#384
996TT RUF 520 HP
Join Date: Sep 2005
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
rgonza:
""HEHE brings this car to puerto rico for will you see that's Porcheria 996 loosing with two rotors FD And FC on mime i can get a 1300 Hp At just 30 PSI and runs low in the 8's do you have time slips on 1/4 mile HEHE the only that,s i know runs in highs 9 was Edie Bellows with his porsh 911 Twin Turbos and he's loosing with an FD twin turbo after tha,s i not seen he runs his porchs again.
Inmagine 1300 RWP From just 2.0 liter. i dont need High $$$$$$$ porshe simple i beat then in the street and the track. I heva a friend of mine that's hes own a 911 twin turbos i leave him in the dust and he say that he got 700 HP at wheels too. DO you whant to bet???? Just bring this car to Puerto Rico HEHEHE.
Do you not hear about Marcos Acosta Rx8 Versus High mods Porche race?
If you dont know!!!!
The Marcos Acosta Rx8 Win this race""
You got it wrong!!!!! I'm not talking about modded RX7"S cars here. WE ARE TALKING ABOUT YOUR RX8 PROJECT MAKING 3 ROTOR ROTARY ENGINES" You generalized that this car was faster that all the German,Italian supercars and THAT IS NOT TRUE. Of course there are a lot of rotary engine cars that are superfast, no one is saying the contrary. Just you saying that this 3 ROTOR ENGINE CAR is faster than anything else.
I am not going to continue to debate this. This is your thread about your project.
Good Luck and be safe.
""HEHE brings this car to puerto rico for will you see that's Porcheria 996 loosing with two rotors FD And FC on mime i can get a 1300 Hp At just 30 PSI and runs low in the 8's do you have time slips on 1/4 mile HEHE the only that,s i know runs in highs 9 was Edie Bellows with his porsh 911 Twin Turbos and he's loosing with an FD twin turbo after tha,s i not seen he runs his porchs again.
Inmagine 1300 RWP From just 2.0 liter. i dont need High $$$$$$$ porshe simple i beat then in the street and the track. I heva a friend of mine that's hes own a 911 twin turbos i leave him in the dust and he say that he got 700 HP at wheels too. DO you whant to bet???? Just bring this car to Puerto Rico HEHEHE.
Do you not hear about Marcos Acosta Rx8 Versus High mods Porche race?
If you dont know!!!!
The Marcos Acosta Rx8 Win this race""
You got it wrong!!!!! I'm not talking about modded RX7"S cars here. WE ARE TALKING ABOUT YOUR RX8 PROJECT MAKING 3 ROTOR ROTARY ENGINES" You generalized that this car was faster that all the German,Italian supercars and THAT IS NOT TRUE. Of course there are a lot of rotary engine cars that are superfast, no one is saying the contrary. Just you saying that this 3 ROTOR ENGINE CAR is faster than anything else.
I am not going to continue to debate this. This is your thread about your project.
Good Luck and be safe.
Last edited by rx8ultra; 02-13-2006 at 04:31 PM.
02-13-2006, 07:16 PM
#385
Rob gonzalez
Thread Starter
Join Date: Dec 2005
Location: Naranjito, Puerto Rico
Posts: 356
Likes: 0
Received 0 Likes
on
0 Posts
at moment i did runs (Illegal Street racings) versus german, Italian,Ferraris,BMW M, Prochs supercars amd i beat all then at the moment . 0 Looses for RX8 . If you whant to see very Hot Street Racing come to the island i invite you you'll see how my RX8 dust a Porch 996 and others european cars. Here's you'll find and another super hot (outlaws) categories Twin Turbos Camaros and Mustangs,New Dodge Chargers, vipers. All of then with 1200+ HP and they on slicks The mods porchs in this league looks like Hondas. I run my car with 657 rwhp for daily uses, For race i setup for 900+ RWHP. In my category i have 0 looses at the moment.
Last edited by rgonza; 02-13-2006 at 07:26 PM.
02-13-2006, 07:40 PM
#387
Rob gonzalez
Thread Starter
Join Date: Dec 2005
Location: Naranjito, Puerto Rico
Posts: 356
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by rotarygod
There is always a faster car out there somewhere. You'll find one someday.
02-13-2006, 07:47 PM
#389
Originally Posted by rx8ultra
GOOD FOR YOU !!!!! They should honor your car in all the car magazines in the world!!!!, top gear, etc !!! How old are you? I have a lot of RX8 friends that dont have the mentality nor the inmatureness that you are showing here.
Like RG said , one day you will find what humbleness means.
Tenia que ser Boricua !!!!!
Like RG said , one day you will find what humbleness means.
Tenia que ser Boricua !!!!!
that was not cool. might want to read the tread and know what he has done before you post crap like that!!!!!!!
beers
02-13-2006, 07:53 PM
#390
Rob gonzalez
Thread Starter
Join Date: Dec 2005
Location: Naranjito, Puerto Rico
Posts: 356
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by rx8ultra
GOOD FOR YOU !!!!! They should honor your car in all the car magazines in the world!!!!, top gear, etc !!! How old are you? I have a lot of RX8 friends that dont have the mentality nor the inmatureness that you are showing here.
Like RG said , one day you will find what humbleness means.
Tenia que ser Boricua !!!!!
Like RG said , one day you will find what humbleness means.
Tenia que ser Boricua !!!!!
02-13-2006, 08:17 PM
#392
Registered User
Join Date: Feb 2005
Location: Manati, Puerto Rico
Posts: 607
Likes: 0
Received 0 Likes
on
0 Posts
rx8ultra,
you're who is showing inmatureness...............you can't insult
all the puertorricans without any reason.
Robert knows a lot about mechanic and electronics and offer a lot
of input to other members of this forum thru a lot of PM..............
He owns a fast car and the true is that he have no losses......................
If some day he loss he would work hard on his car to make it faster.
His cars are very serious, you can check this thread and see the pictures
of his other car a 1,400+ hp shelby cobra built by himself.
Manuel
you're who is showing inmatureness...............you can't insult
all the puertorricans without any reason.
Robert knows a lot about mechanic and electronics and offer a lot
of input to other members of this forum thru a lot of PM..............
He owns a fast car and the true is that he have no losses......................
If some day he loss he would work hard on his car to make it faster.
His cars are very serious, you can check this thread and see the pictures
of his other car a 1,400+ hp shelby cobra built by himself.
Manuel
02-13-2006, 08:49 PM
#393
Registered User
Join Date: Dec 2005
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by rx8ultra
You cant put pigs hearts on a human either (They only use their valves).
True Magellan:
I just dont like when people use analogies using family members that they dont know, more so when they have a heart condition, but enough of this.
Puerto Rico: Congratulations on building a faster RX8.
Dios los bendiga y guien con cuidado. Saludos.
True Magellan:
I just dont like when people use analogies using family members that they dont know, more so when they have a heart condition, but enough of this.
Puerto Rico: Congratulations on building a faster RX8.
Dios los bendiga y guien con cuidado. Saludos.
02-14-2006, 12:20 AM
#394
Senor Carnegrande
Join Date: Jul 2003
Posts: 871
Likes: 0
Received 0 Likes
on
0 Posts
Hey, what does a 3-rotor sound like anyhow? Any sound clips?
Looks like I spoke too soon. Why stop at a 3 rotor, when you can have Puerto Rican levels of power from a N/A 4 or 6 rotor?
http://hurleyrotary.com/hme13b.aspx
(Granted it's not based on a renesis, but...24 mpg from a 3-rotor? How is the renesis an improvement again??)
Originally Posted by rx8wannahave
^LOL...yeah, I had to go read my 3-rotor Renesis thread to be brought back to earth. I guess I'll have to say goodbye to NA power in the future and give in to the Turbo upgrade.
I know, I wont be modding heavy for a while but I just love to dream I guess.
By the way, how much HP did the 20B make in NA form? Is 400HP from a 20B NA possible?
Anyway, I hope direct fuel injection and a wider (15B) rotor change the world of the Rotary one day.
Manuel...ignore my foolish newbie dreaming.
I know, I wont be modding heavy for a while but I just love to dream I guess.
By the way, how much HP did the 20B make in NA form? Is 400HP from a 20B NA possible?
Anyway, I hope direct fuel injection and a wider (15B) rotor change the world of the Rotary one day.
Manuel...ignore my foolish newbie dreaming.
http://hurleyrotary.com/hme13b.aspx
(Granted it's not based on a renesis, but...24 mpg from a 3-rotor? How is the renesis an improvement again??)
02-14-2006, 12:26 AM
#396
Originally Posted by rx8ultra
Sorry, if I insulted anyone. It wasnt my intention !!! I apologize to Rgonzo!!!
I'm not going to keep fighting about cars because it is not worth it. We are all car enthusiasts and we dont need to be doing this. You have a very fast car and apparently you know your stuff.
Congratulations and God bless.
I'm not going to keep fighting about cars because it is not worth it. We are all car enthusiasts and we dont need to be doing this. You have a very fast car and apparently you know your stuff.
Congratulations and God bless.
you insulted everyone!!! and we are car enthusiasts and YOU do not be doing this!!!!!!!
beers
02-14-2006, 12:51 AM
#397
Can I change my username?
Join Date: Aug 2005
Location: san francisco
Posts: 216
Likes: 0
Received 0 Likes
on
0 Posts
rgonza, I finish my semester at san francisco city college in may, I would like to come visit you. is that possible? maybe I want to see if you can build 3 rotor 
02-14-2006, 07:34 AM
#399
Registered User
Join Date: Feb 2005
Location: Manati, Puerto Rico
Posts: 607
Likes: 0
Received 0 Likes
on
0 Posts
I was working with Robert yesterday nigth trying to figure out the innovate FAR.........
Basically the only part that he need to work a little more to finish it, is the base for the air conditioning compressor...................
After that we're waiting for a base mount for the eboost2 from turbosmart and the car would be on the streets!
Manuel
Basically the only part that he need to work a little more to finish it, is the base for the air conditioning compressor...................
After that we're waiting for a base mount for the eboost2 from turbosmart and the car would be on the streets!
Manuel
02-14-2006, 08:25 AM
#400
Follower of CHRIST!!!!!!!
Join Date: Aug 2004
Location: Planet Earth
Posts: 3,241
Likes: 0
Received 0 Likes
on
0 Posts
Looks like I spoke too soon. Why stop at a 3 rotor, when you can have Puerto Rican levels of power from a N/A 4 or 6 rotor?
http://hurleyrotary.com/hme13b.aspx
(Granted it's not based on a renesis, but...24 mpg from a 3-rotor? How is the renesis an improvement again??)
http://hurleyrotary.com/hme13b.aspx
(Granted it's not based on a renesis, but...24 mpg from a 3-rotor? How is the renesis an improvement again??)