3 Rotor RX8 PR
#227
Rob gonzalez
Thread Starter
Join Date: Dec 2005
Location: Naranjito, Puerto Rico
Posts: 356
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Charles R. Hill
Oh, you're referring to the PPF as well as the axle shafts. I am working on an aluminum PPF but if higher h.p./torque levels become more common I guess I'll have to go back to making a PPF out of Titanium. A bit costly but you know the axiom.... I found a larger rear swaybar to help control wheelhop but I am nowhere near the power you are making.
On the matter of the axles; do you think that Titanium shafts would help? Maybe I just need to get REAL serious about these things I want to make
Thanks for the response and info.
CRH
On the matter of the axles; do you think that Titanium shafts would help? Maybe I just need to get REAL serious about these things I want to make
Thanks for the response and info.
CRH
thanks, CRH
Rgonza
#229
Registered User
Join Date: Feb 2005
Location: Manati, Puerto Rico
Posts: 607
Likes: 0
Received 0 Likes
on
0 Posts
Robert,
Do you have already one of the bosh pumps?
Let me know ASAP because on the site that knonfs give us they have it at a good price.
I just need to know if you have one, to buy just one more.
I would need to see you tomorrow, I'm goin to Wiso shop to see the car and I need to give you the LT12S. If I don't see you I can give the ECU to Wiso or anyone on your house.
Thanks,
Manuel
Do you have already one of the bosh pumps?
Let me know ASAP because on the site that knonfs give us they have it at a good price.
I just need to know if you have one, to buy just one more.
I would need to see you tomorrow, I'm goin to Wiso shop to see the car and I need to give you the LT12S. If I don't see you I can give the ECU to Wiso or anyone on your house.
Thanks,
Manuel
#231
Rob gonzalez
Thread Starter
Join Date: Dec 2005
Location: Naranjito, Puerto Rico
Posts: 356
Likes: 0
Received 0 Likes
on
0 Posts
Manuel, you can use this one for the secundary fuel pump, and buy the regular one for primary, youre no have to need to buy two 044 pumps.
Rgonza
Rgonza
#234
Registered User
Join Date: Feb 2005
Location: Manati, Puerto Rico
Posts: 607
Likes: 0
Received 0 Likes
on
0 Posts
Braco,
I'm from Manati and Robert is from Naranjito..................
you can check at the top off our messages there is the information from we're we are!
Saludos,
Manuel
I'm from Manati and Robert is from Naranjito..................
you can check at the top off our messages there is the information from we're we are!
Saludos,
Manuel
#239
Registered User
Join Date: Feb 2005
Location: Manati, Puerto Rico
Posts: 607
Likes: 0
Received 0 Likes
on
0 Posts
jenkins,
In Puerto Rico we speak "spanglish"!
Sometimes is better to speak two bad languages than just one..........
Braco ask, who programs the microtech...........
Manuel
In Puerto Rico we speak "spanglish"!
Sometimes is better to speak two bad languages than just one..........
Braco ask, who programs the microtech...........
Manuel
#240
Rob gonzalez
Thread Starter
Join Date: Dec 2005
Location: Naranjito, Puerto Rico
Posts: 356
Likes: 0
Received 0 Likes
on
0 Posts
20B 3 Rotor RX 8 Clutch Assy.
Manuels'
In this site http://www.vividracing.com/catalog/p...ducts_id/10623 you will find the info of this clutch. This is the unit that i already odered. And this unit is easy to drive in streets and the tracks.
The Major concern is the lead time too much time for deliver not from this store i purshased from dynespeed.
In this site http://www.vividracing.com/catalog/p...ducts_id/10623 you will find the info of this clutch. This is the unit that i already odered. And this unit is easy to drive in streets and the tracks.
The Major concern is the lead time too much time for deliver not from this store i purshased from dynespeed.
#243
Registered User
Join Date: Feb 2005
Location: Manati, Puerto Rico
Posts: 607
Likes: 0
Received 0 Likes
on
0 Posts
Robert,
Rotary extreme sales the twin plate and the triple plate.............
http://www.rotaryextreme.com/fdclutch.html
I'm also checking other options.
Ask we talk, I'm goin to see "Galdy" this Saturday I'm goin to talk
about what he thinks and recommends...........
Manuel
Rotary extreme sales the twin plate and the triple plate.............
http://www.rotaryextreme.com/fdclutch.html
I'm also checking other options.
Ask we talk, I'm goin to see "Galdy" this Saturday I'm goin to talk
about what he thinks and recommends...........
Manuel
#244
Rob gonzalez
Thread Starter
Join Date: Dec 2005
Location: Naranjito, Puerto Rico
Posts: 356
Likes: 0
Received 0 Likes
on
0 Posts
Manuels,
Thanks, but their not mentioned (EXEDY) about the torque capacity for the twins or triple plates.
i'm already knows (Torque Capacity) for the triple one.
Rgonza
Thanks, but their not mentioned (EXEDY) about the torque capacity for the twins or triple plates.
i'm already knows (Torque Capacity) for the triple one.
Rgonza
#246
Registered User
Join Date: Feb 2005
Location: Manati, Puerto Rico
Posts: 607
Likes: 0
Received 0 Likes
on
0 Posts
When I see the last pictures, looks like someone is cleaning a few parts.
Galdy gift me the pulley for the pump...............
I think that I'm goin to Wiso's shop tomorrow, I would need to take a few pictures
of the fuel system and probably take it the system with me.
Do you have the 3 rotor dummy engine at your house/shop?
Thanks,
Manuel
Galdy gift me the pulley for the pump...............
I think that I'm goin to Wiso's shop tomorrow, I would need to take a few pictures
of the fuel system and probably take it the system with me.
Do you have the 3 rotor dummy engine at your house/shop?
Thanks,
Manuel
#250
Rob gonzalez
Thread Starter
Join Date: Dec 2005
Location: Naranjito, Puerto Rico
Posts: 356
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by R.P.M.
Rob, did you use the stock 20B oil pan in your RX-8? Any modifications done to the subframe?
Yes i'm still using the stock 20B Oil pan but when i'm installed this it is 1 1/2" more deeper than the stock renesis. i'm going to fabricate an aluminum one with 1 1/2" less than the 20B stock. For the subframe you'll need to modificate it. i can send to you a pics of this mods in the subframe, it's easy to modificate if you have some welding skills.
rgonza