TeamRX8

iTrader: (25)

status update?

should of PMd or emailed me about the alternator as this is the first time I've been back since offering

JETS3T8

No prob Team, thx for at least offering it though.

Motor is finally back together after the front stationary gear bearing was totally destroyed. The front rotor was banging around pretty bad inside the rotor housing due to this and unfortunately also took out 2 apex seals, the e-shaft and the rear gear bearing in the process. All has been replaced and this go around the motor was built with Goopy apex seals as they were readily available and I needed to get the motor together quickly. The NRS ceramics will go in my standby motor that I'm currently building.

Here is the motor ready to go back in this weekend:

ELI063

nice... im glad u have everything fixed.

sauceyI986

Yeah me to. I like to see this baby run

JETS3T8

It's alive...again.

9krpmrx8

iTrader: (46)

Holy Jesus, that turbo makes mine look like a hair dryer. beautiful man, any more close ups of the engine?

JETS3T8

Thx.
Check out my album for more pics:

https://www.rx8club.com/members/jets3t8-81235-albums-2010-turbo-build-photoset-2466/

Turblown

I might be flying back down to PHX in a month or so to take care of a pair of Rx-7s.. Would only be a short flight to CA to help you finish the tune....

JETS3T8

Perfect, motor should be broken in by then. You da man E!

angeljoelv

Looking good my friend.

JETS3T8

Thx Angel. Getting there slowly but surely, what's up with that 8.8 setup you were working on?

angeljoelv

BHR axles are holding up, so it kinda put it on hold..

JETS3T8

200 miles on the new motor so far, all systems look good. Have only gone up to 1psi-3psi.
Currently I have a plate blocking the APV ports(since I removed/modified the sleeves) and the SSV has also been disabled for break-in (not really necessary).
Running rich but not as rich as before.
In those 200 miles I'm averaging 15.7 highway mpg.
Also, since I'm not running an OMP I'm premixing 128:1 (1oz/gallon)

300 more miles to go and I'll throw her on the dyno...

pdxhak

iTrader: (2)

Nice man! Must be soooo hard not getting on the throttle

NgoRX8

iTrader: (1)

good luck! only 300 miles to go! so should we expect a dyno chart this weekend? haha

JETS3T8

Anyone local to West Hills 91304 with an Access Port?
I need my PCM programmed with lower cooling fan "on" temps.

Thx!

ZumnRx8

Your near West Hills! Damn, hope to see youuuu running around.

bse50

You have to buy an AP, you can't just use it to flash.

ELI063

Sweet can't wait to see what u working with. I guess it's worth the wait... It's like waiting for the fast five to come out. Haha

gregs

iTrader: (7)

need me to warm up the dyno?

JETS3T8

That's lame.

Anyways, there's a way to do it with my Adaptronic ECU but I would use up two of the "aux out" ports for each fan relay, more work than just hooking up a cable and flashing the PCM. I'm not having any cooling issues at the moment, this is more of a proactive measure so I'll have to think about what to do here.

bse50

Lookup how mazsport's fan tool worked. It costs around 30$ to build it yourself.
They are still selling them on ebay under the new shop's name... if you don't mind giving money to a known thief that filed for bankruptcy and flew away with many people's money you may even buy it there.

TeamRX8

iTrader: (25)

or you could buy and use the cooling fan temp control unit from Mind's Eye Engineering on fleaBay as several others have done ...

edit: yeah, what BSE50 said ...

TeamRX8

iTrader: (25)

or you could just buy a used AP, should be able to have both simultaneously and there may be more benefits to doing it that way despite some of the apparent overlap

JETS3T8

The relay/sensor kit would be nice, it's just that I dont have that air separator hose to splice into, I may have to use the short heater hose that connects to the rear of the motor on driver's side? Besides, you're right the AP will give me more flexibility if I need to change the "on" temps higher or lower down the road, as well as anything else that's solely still controlled by the PCM.
Time to hunt for a used AP...