DIY: RB Gauge Pod + Nordskog Digital Gauges
12-26-2007, 08:31 PM
#28
Administrator
Thread Starter
iTrader: (7)
12-27-2007, 01:09 AM
#32
I realy liked the set up and instructions, thanks.
I was thinking about doing something similar but was looking at getting dual digital guages so I can get all my guages in one place. I am considering going FI at some point so I would want, boost, a/f ratio, oil temp and pressure and water temp. I found that SPA makes dual digital guages but they are expensive and I did not find an a/f ratio guage. They have a dual oil temp and pressure guage, dual water temp and boost and they have some egt temp guages and volt guages just no a/f guages. I could go with dual oil temp and pressure guage, dual water temp and boost and then put another brand a/f guage in there but I would want a uniform look.
Does anybody know any other company that makes good dual guages? I think the 2 spa guages I listed would come to about $500. I would like to less and I wanted the af ratio guage not just an EGT guage.
Thoughts?
I was thinking about doing something similar but was looking at getting dual digital guages so I can get all my guages in one place. I am considering going FI at some point so I would want, boost, a/f ratio, oil temp and pressure and water temp. I found that SPA makes dual digital guages but they are expensive and I did not find an a/f ratio guage. They have a dual oil temp and pressure guage, dual water temp and boost and they have some egt temp guages and volt guages just no a/f guages. I could go with dual oil temp and pressure guage, dual water temp and boost and then put another brand a/f guage in there but I would want a uniform look.
Does anybody know any other company that makes good dual guages? I think the 2 spa guages I listed would come to about $500. I would like to less and I wanted the af ratio guage not just an EGT guage.
Thoughts?
Last edited by Highway8; 12-27-2007 at 01:22 AM. Reason: spelling
12-27-2007, 10:45 AM
#33
Administrator
Thread Starter
iTrader: (7)
Originally Posted by RotaryRasp
whoa, very nicely done jedi....
p.s. - i really like those footwell lights you got!
p.s. - i really like those footwell lights you got!
Originally Posted by Shinka213
nice work jorge....youre always involved in a top notch project...
Originally Posted by RA-Eight
That looks really nice, matches the interior very well. Digital readout is the way to go for that location.
that set up is off the chain, jorge! haha well done!!!!
nice detailed instructions too
nice detailed instructions too
Originally Posted by xdeedubbx
jorge you are the freaking man!!!! great DIY!! Im jealous now
Originally Posted by elf
Woot! Great writeup, Jorge! Amost missed this thread.
Gonna have to make it to one of the LAX meets to see this (when you decide to go, that is) LOL.
Gonna have to make it to one of the LAX meets to see this (when you decide to go, that is) LOL.
Originally Posted by highway8
Does anybody know any other company that makes good dual guages? I think the 2 spa guages I listed would come to about $500. I would like to less and I wanted the af ratio guage not just an EGT guage.
12-27-2007, 01:50 PM
#35
Not only is he a Jedi master, and vicious with a light saber . . .But he can work on cars too.
Such a nice job. Love the look. This look is factory stock. The fit, the color match, everything is top notch.
Good job and a great DIY.
Such a nice job. Love the look. This look is factory stock. The fit, the color match, everything is top notch.
Good job and a great DIY.
01-05-2008, 10:35 PM
#40
Administrator
Thread Starter
iTrader: (7)
Thanks Swoope!
Problem is that img tags don't work in the DIY section which is why I posted it here. Figured the bigger pictures were easier to see then clicking all the small thumbnails at the bottom.
Here's the post from Zoom about img tags + DIY section: https://www.rx8club.com/showpost.php...83&postcount=4
Problem is that img tags don't work in the DIY section which is why I posted it here. Figured the bigger pictures were easier to see then clicking all the small thumbnails at the bottom.
Here's the post from Zoom about img tags + DIY section: https://www.rx8club.com/showpost.php...83&postcount=4
01-05-2008, 10:52 PM
#43
Administrator
Thread Starter
iTrader: (7)
Thanks Omicron!
D'oh!!! Just noticed all my pics went away. Any chance of getting this sticked in the Interior / Electronics forum instead?
Thanks again guys for all the support.
D'oh!!! Just noticed all my pics went away. Any chance of getting this sticked in the Interior / Electronics forum instead?
Thanks again guys for all the support.
01-05-2008, 10:59 PM
#44
Thanks Swoope!
Problem is that img tags don't work in the DIY section which is why I posted it here. Figured the bigger pictures were easier to see then clicking all the small thumbnails at the bottom.
Here's the post from Zoom about img tags + DIY section: https://www.rx8club.com/showpost.php...83&postcount=4
Problem is that img tags don't work in the DIY section which is why I posted it here. Figured the bigger pictures were easier to see then clicking all the small thumbnails at the bottom.
Here's the post from Zoom about img tags + DIY section: https://www.rx8club.com/showpost.php...83&postcount=4
ah i get it now.. maybe you could upload the pics in diy. and get a sticky in the elec. forum.
beers
01-06-2008, 10:50 AM
#46
What pointy ears?
Yeah, stickiness, finally --- well, at least for awhile 
Too bad there isn't a way to position pics (that's been uploaded to the forum) within the text of a post. I think DIYs flow much better that way.
Too bad there isn't a way to position pics (that's been uploaded to the forum) within the text of a post. I think DIYs flow much better that way.
01-22-2008, 05:42 PM
#49
Administrator
Thread Starter
iTrader: (7)
