RX8Club.com

Notices
Series I Aftermarket Performance Modifications Discussion of power adding modifications

Twin Turbos?

   
Old Nov 24, 2009 | 11:22 PM
Share
  #1  
DarkMungKeyBoI's Avatar
DarkMungKeyBoI
Thread Starter
Registered User
 
Joined: Sep 2009
Posts: 4
Likes: 0
Twin Turbos?
has anyone ever thought/tried/put two t3/t4s on the 13b and had custom manifolds and downpipes? or is that just ridiculous
Reply
0
Old Nov 24, 2009 | 11:24 PM
Share
  #2  
mac11's Avatar
mac11
Rotary , eh?
iTrader: (1)
 
Joined: Jun 2006
Posts: 1,850
Likes: 1
From: Elkhart, IN
just ridiculous.
Reply
0
Old Nov 24, 2009 | 11:33 PM
Share
  #3  
dozer's Avatar
dozer
on his 3rd rx8
iTrader: (3)
 
Joined: Dec 2006
Posts: 6,036
Likes: 12
From: santa ana, ca
you do know that the twins off the FD are a direct swap, right?
Reply
0
Old Nov 24, 2009 | 11:40 PM
Share
  #4  
getdamafiaonyou's Avatar
getdamafiaonyou
Registered User
 
Joined: Sep 2008
Posts: 348
Likes: 0
Do it. Oh. Don't forget the vtec controller.

Ok. Im in a good mood. here. https://www.rx8club.com/series-i-major-horsepower-upgrades-93/power-adders-fi-dummies-turbo-supercharger-nitrous-122645/

try searching.
Reply
0
Old Nov 24, 2009 | 11:53 PM
Share
  #5  
shazy's Avatar
shazy
Registered
 
Joined: Oct 2008
Posts: 2,256
Likes: 0
From: Montreal,QC
Spam
:d
Reply
0
Old Nov 25, 2009 | 12:00 AM
Share
  #6  
Ross_Dawg's Avatar
Ross_Dawg
Registered Toker
iTrader: (2)
 
Joined: Dec 2007
Posts: 5,545
Likes: 1
From: Bend, OR
Dozer's right; a couple people here have successfully swapped the twins off an FD and applied them to the renny. Works like a charm, you just need to know how to weld a few parts.
Reply
0
Old Nov 25, 2009 | 12:17 AM
Share
  #7  
getdamafiaonyou's Avatar
getdamafiaonyou
Registered User
 
Joined: Sep 2008
Posts: 348
Likes: 0
Weld? i thought all you had to use was the 3m double sided tape?
Reply
0
Old Nov 25, 2009 | 11:00 AM
Share
  #8  
Jedi54's Avatar
Jedi54
Administrator
iTrader: (7)
 
Joined: Mar 2004
Posts: 22,635
Likes: 3,503
From: The Dark Side
darkmung: welcome to the forums.
will not work
single turbo > TT
Reply
0
Old Nov 25, 2009 | 11:13 AM
Share
  #9  
ZumnRx8's Avatar
ZumnRx8
RX8 & RX7 owner
 
Joined: Mar 2008
Posts: 5,172
Likes: 3
From: So. California
Originally Posted by dozer
you do know that the twins off the FD are a direct swap, right?
why the F do you always use "you do know" in most of the sentences in threads similar to this?

RENESIS aka JOHN does the same thing in real life.....
Reply
0
Old Nov 25, 2009 | 12:11 PM
Share
  #10  
Ross_Dawg's Avatar
Ross_Dawg
Registered Toker
iTrader: (2)
 
Joined: Dec 2007
Posts: 5,545
Likes: 1
From: Bend, OR
Originally Posted by getdamafiaonyou
Weld? i thought all you had to use was the 3m double sided tape?
Oh **** you're right; that Gorilla Glue tape would be more than enough.
Reply
0
Old Nov 26, 2009 | 10:44 AM
Share
  #11  
Turblown's Avatar
Turblown
Boostin'
 
Joined: Feb 2006
Posts: 641
Likes: 1
From: Twin Cities, MN
I wouldn't even try and stuff twins under the hood of an 8. It would be way too much work...
Attached Thumbnails Twin Turbos?-twinsonstand.jpg   Twin Turbos?-twins.jpg  
Reply
0
Old Nov 26, 2009 | 10:59 AM
Share
  #12  
alz0rz's Avatar
alz0rz
hakuna matata!
iTrader: (41)
 
Joined: Aug 2007
Posts: 6,002
Likes: 3
From: NYC
Holy crap.
Reply
0
Old Nov 26, 2009 | 01:22 PM
Share
  #13  
Brettus's Avatar
Brettus
Boosted Kiwi
iTrader: (2)
 
Joined: Apr 2006
Posts: 20,856
Likes: 1,807
From: Y-cat-o NZ
If you go twin turbos you will need the new cooling solution from BHR .

I'll see if I can find a pic.


here (courtesy of Easy E1) ...............

Name: fan005.jpg Views: 77 Size: 82.7 KB
Last edited by Brettus; Nov 26, 2009 at 01:25 PM.
Reply
0
Old Nov 27, 2009 | 06:35 AM
Share
  #14  
nycgps's Avatar
nycgps
Out of NYC
iTrader: (1)
 
Joined: Jun 2005
Posts: 19,881
Likes: 36
From: Planet Earth
Originally Posted by Brettus
If you go twin turbos you will need the new cooling solution from BHR .

I'll see if I can find a pic.


here (courtesy of Easy E1) ...............


rofl o yes the clutch fan on my fc roxorz
Reply
0
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
COBB AccessPort
Hunterkelley24
Series I Engine Tuning Forum
14
Jun 14, 2022 08:32 AM
Swap to end all swaps
galognu
Rotary Swaps
138
Nov 16, 2020 05:20 AM
Jimmy’s First Turbo Build (Greddy)
JimmyBlack
Series I Major Horsepower Upgrades
273
Feb 10, 2020 10:23 PM
Total loss
MolecularConcept
RX-8 Discussion
11
Sep 29, 2015 09:21 PM
4age 20v in RX8
doc.tarzan
Non-Rotary Swaps
2
Sep 24, 2015 08:32 AM
Back to Subforum
Series I Aftermarket Performance Modifications
View Next Unread
SR motorsports GT4 packages...


Thread Tools
Rate This Thread
Rate This Thread:
You have already rated this thread Rating: Thread Rating: 0 votes, average.
Show Printable Version
Email this Page

Advanced Search

All times are GMT -5. The time now is 08:38 AM.