Spring springs springs
#352
One ball, corner pocket
Join Date: Apr 2004
Location: Fontucky, right next to Patriotville
Posts: 2,053
Likes: 0
Received 1 Like
on
1 Post
oh yea real nice! hmm i have that same factory kit, but my side skirts are the flares instead of the entire skirt, and based off of what you got on your car, it looks like it would work on mine. i guess my only concern is that i dont think id be able to go into any store driveway such as a dunkin donuts or the mall near here because they have these grades to get into them if you know what i mean. how was your driveability affected by these? i know you said it would scrape just about everything but i think i can get used to that, id just have to change my driving habits i guess. also like with most springs did your car bounce a lot? and if you could PM with a price i think id be interested.
I you saw a picture of Michael's car from ground level you'd understand how low his car really is with the additional body kit items. Have him hold his hand or a dollar bill next to the car on the ground to show you a perspective of how much clearance you would actually have...it aint going to be much. Look back a couple of post with Speeddemon's car. Look at the pictures which are lower to the ground that show you how much clearance he had....and then add an appearance lip on in, and side flares.....IT is a GREAT drop, but not for anyone looking to go with a body kit or anything larger than stock wheels/tires.
Last edited by kwescott; 01-27-2009 at 03:33 PM.
#353
Administrator
iTrader: (7)
^^ ding ding ding, 10 pts for Keith!
Speed, I think it was easy for you because you didn't have those but I still remember you pulling into the meets and I could see you scraping a little to get into the driveway. With appearance pkg ....
Speed, I think it was easy for you because you didn't have those but I still remember you pulling into the meets and I could see you scraping a little to get into the driveway. With appearance pkg ....
#354
One ball, corner pocket
Join Date: Apr 2004
Location: Fontucky, right next to Patriotville
Posts: 2,053
Likes: 0
Received 1 Like
on
1 Post
...and that entry to the Pirate City Tattoo lot was an easy apron....nothing like some of the ones I saw when I was in downtown Los Angeles. I had issues even with my drop and the MS bodykit.
#355
Bigboy in a little car!
Thread Starter
Join Date: Nov 2004
Location: In So Cal.. out in BFE... but in the good part... but not really by Cesar, Keith or Loren...
Posts: 1,276
Likes: 0
Received 6 Likes
on
6 Posts
I understand... i'm just sayin is sucks that he had to go through all that to get the springs on. the headach, and then have to take them off.... really blows.
#358
i have them and like them, at first i thought it didn't lower enought, but they settle over time to just the right height!!!! this is the second car that i had put eibachs on
#359
I am using Tein S Tech on my RX8, ride quality is quite stiff but still is tolerable for me. I guess it's 'looks' before 'comfort' for me. Haha
__________________
mazda rx8 aftermarket radiator
__________________
mazda rx8 aftermarket radiator
#360
Registered
Join Date: Dec 2006
Location: Wishing I was in Atlanta!
Posts: 167
Likes: 0
Received 0 Likes
on
0 Posts
I had STechs on stock struts and it was a alright setup, but there was still a little wheel gap with the 245/40/18 tires. I saw that the Sprint springs have a 2" drop, front and rear, I really don't want the rear to be tucked/slammed or whatever. I there anyway to circumvent this result with the Sprint springs?
#362
doin' the bull dance
Join Date: Mar 2006
Location: Quahog, RI
Posts: 3,174
Likes: 0
Received 0 Likes
on
0 Posts
But if it's just for looks you probably want the drop to make the wheel gap EVEN. If front & rear drop even amounts the front will still look jacked up compared to the rear.
#363
One ball, corner pocket
Join Date: Apr 2004
Location: Fontucky, right next to Patriotville
Posts: 2,053
Likes: 0
Received 1 Like
on
1 Post
S techs would be the way I would go if I was to lower an RX8 again. Ride height and ride quality were both good.
If you want to customize the ride height though, coilovers are the only way to go.
If you want to customize the ride height though, coilovers are the only way to go.
#365
Lucky #33
iTrader: (4)
Ground Control! Save us! I wish they made one of there kits for our cars..... heck I think they make one for almost every other Mazda sports car ever made. There kits for the Miata if I remember correctly were very stiff.
10kg 8kg FR ftw!
10kg 8kg FR ftw!
Last edited by hoss -05; 03-17-2009 at 11:03 AM.
#367
Lucky #33
iTrader: (4)
I know the GC kit had the ability to be fairly brutal on the Miata. I didn’t think it was that bad with the FCM bump stops and the correct dampeners. I have herd bad things when paired with the “Yellows” and stock bump stops but could have this twisted. I was running higher rate springs on my old Miata and loved it but I had adjustable dampeners.
I think the GC's on a 8 would be great, adjustable lowering springs with much stiffer then stock rates! MMM we can only hope. O mazdaspeed springs why could you not have been rated as we thought you were.
I think the GC's on a 8 would be great, adjustable lowering springs with much stiffer then stock rates! MMM we can only hope. O mazdaspeed springs why could you not have been rated as we thought you were.
#368
One ball, corner pocket
Join Date: Apr 2004
Location: Fontucky, right next to Patriotville
Posts: 2,053
Likes: 0
Received 1 Like
on
1 Post
totally agree with you on everything....I also bought the MS suspension for my 8 based on the initial thought that they would be stiffer than stock...oh well.
#369
Bigboy in a little car!
Thread Starter
Join Date: Nov 2004
Location: In So Cal.. out in BFE... but in the good part... but not really by Cesar, Keith or Loren...
Posts: 1,276
Likes: 0
Received 6 Likes
on
6 Posts
Amen brotha.
yeah the GC kit for the miata has a couple different choices. obviously I went with the super mega stiff option (700 pound front, 375 rear).
I also dont understan why they dont make a kit fo rthe RX-8. back in my RX-8 days I called them to see if they had a kit in the workings, they said no, and at that time there were NO plans to make them. of course this would have been 2 years ago.
#370
Lucky #33
iTrader: (4)
B&G Suspension Products
I have more info regarding this company's lowering springs awaiting further permission to post the correspondence. So far so good but not my "dream spring rates" just yet. Still searching......... Ground control come though already..... My RX is still waiting.
PS the only way I knew about this company is though a advertisement they had with a 8 in the Aug 2004 issue of Scc. They seem like a good company that was more then willing to answer my questions. And that is alot more then I can say then for others I contacted.
PS the only way I knew about this company is though a advertisement they had with a 8 in the Aug 2004 issue of Scc. They seem like a good company that was more then willing to answer my questions. And that is alot more then I can say then for others I contacted.
#371
Whats up guys Mike here from B&G Suspension.. Mike (Hoss -05) Emailed me asking about the Spring rates of our products.. So I thought to come on here and add the spring rates and also a pic of the Springs. let me know if you guys have any questions.
Spring rates are
Front 32.5 Kg/cm ( 185.60 lbs)
Rear 25 Kg/cm (142.77 lbs)
Spring rates are
Front 32.5 Kg/cm ( 185.60 lbs)
Rear 25 Kg/cm (142.77 lbs)
#373
Bigboy in a little car!
Thread Starter
Join Date: Nov 2004
Location: In So Cal.. out in BFE... but in the good part... but not really by Cesar, Keith or Loren...
Posts: 1,276
Likes: 0
Received 6 Likes
on
6 Posts
damn.... (not that I care anymore)... those rates are ust like every other spring out there. why wont anyone make a STIFF lowering spring?
anyways, whats the drop on them? I will add them to the first post.
I will link to Fluid Motorsports.
anyways, whats the drop on them? I will add them to the first post.
I will link to Fluid Motorsports.
#374
Bigboy in a little car!
Thread Starter
Join Date: Nov 2004
Location: In So Cal.. out in BFE... but in the good part... but not really by Cesar, Keith or Loren...
Posts: 1,276
Likes: 0
Received 6 Likes
on
6 Posts
nevermind, found it on Fluid motorsports web site.
first post has been updated with these springs.
first post has been updated with these springs.