RX8 hand held Flash tuner?
#251
Banned
iTrader: (3)
Originally Posted by TeamRX8
it's RENESIS dammit
The rotary motor in the RX-8 is the "Renesis".
The company that makes the processor for the Denso PCM in that runs the Renesis is called "Renasas".
http://www.renesas.com/fmwk.jsp?cnt=...family/&site=i
Last edited by MazdaManiac; 02-10-2006 at 12:54 PM.
#252
No respecter of malarkey
iTrader: (25)
I suppose my recent aggravation over the education level displayed on this board boiled up too much steam into my eyes
I'm not trying to be the spelling/grammar cop, but jesus this is one of the worst boards I surf in this regard, kind of scary to think it's somehow linked with RX-8 ownership
I'm not trying to be the spelling/grammar cop, but jesus this is one of the worst boards I surf in this regard, kind of scary to think it's somehow linked with RX-8 ownership
#257
Registered
iTrader: (5)
Now thats a few posts in a short time. I just now saw this thread.
I have seen it before though. It sounds just like the one I started on the S2000 forum for my shifter. I asked for feedback on what they wanted. All most said was that the S2000 was the best shifter in the world just ask the magazines. No need for my product it can't possably help something so perfect already.
There were so many sceptics that I finaly said OK I give in, I'll not make it for you.
Then I just went about building it anyway. That stopped the negative feedback. I must admit there were some who did encourage and offer help.
Bottom line is that the first batch sold out in two weeks!
Next, let me add my .02, as a supercharger builder who is developing a kit for this car I am super interested. There are several people working on this sort of device and I for one will be in need very soon. I can't give any comments since I have a finite knowlege of these things. This makes me open to anything based only on results.
I know MazdaManiac and will second that he should be encouraged as a friend and source of information. I don't know where he gets all that inside knowlege from but he is the real thing. He doesn't pay me to say that either.
If I can help I'm always willing.
Richard
BTW, before you comment on my spelling remember I'm a stunning woman with large breasts, long hair and a tiny waist.
I have seen it before though. It sounds just like the one I started on the S2000 forum for my shifter. I asked for feedback on what they wanted. All most said was that the S2000 was the best shifter in the world just ask the magazines. No need for my product it can't possably help something so perfect already.
There were so many sceptics that I finaly said OK I give in, I'll not make it for you.
Then I just went about building it anyway. That stopped the negative feedback. I must admit there were some who did encourage and offer help.
Bottom line is that the first batch sold out in two weeks!
Next, let me add my .02, as a supercharger builder who is developing a kit for this car I am super interested. There are several people working on this sort of device and I for one will be in need very soon. I can't give any comments since I have a finite knowlege of these things. This makes me open to anything based only on results.
I know MazdaManiac and will second that he should be encouraged as a friend and source of information. I don't know where he gets all that inside knowlege from but he is the real thing. He doesn't pay me to say that either.
If I can help I'm always willing.
Richard
BTW, before you comment on my spelling remember I'm a stunning woman with large breasts, long hair and a tiny waist.
Last edited by Richard Paul; 02-12-2006 at 03:25 AM.
#259
Wut da F Y'all lookin' @!
Originally Posted by Richard Paul
BTW, before you comment on my spelling remember I'm a stunning woman with large breasts, long hair and a tiny waist.
#266
U-Stink-But-I-♥-U
iTrader: (1)
Join Date: Mar 2005
Location: 12 o'clock on the Beltway.
Posts: 2,004
Likes: 0
Received 1 Like
on
1 Post
Originally Posted by fastsvtss
I'm part of a company that's working on a hand-held flash tuner for the RX-8's that actually can be completed and available relatively soon (Feb. 06) depending on whether there is market interest. .).
#267
No respecter of malarkey
iTrader: (25)
Originally Posted by fastsvtss
... There seems to have been enough interest for this product that we have decided to move forward with it. Right now we're at a point in time where we need to gather & decipher information. It turns out (as some have already mentioned) that the RX-8 ecu reading/writing is unique and different than other applications (even within other Mazda vehicles). We've also spent some time with the Mazda 6 during the past couple weeks and it's completely different than the RX-8.
At this time, I do not want to predict a release date (that usually gets one in trouble). What I will say is that we are going to do this project and it will be done before Summer ...
At this time, I do not want to predict a release date (that usually gets one in trouble). What I will say is that we are going to do this project and it will be done before Summer ...
#272
Registered
hey least its not as long as all those superchargers we have been promised.
This tuner would probably be the only mod I would buy considering I could disable the CAT CEL and run a midpipe.
This tuner would probably be the only mod I would buy considering I could disable the CAT CEL and run a midpipe.
#275
Registered
TTMFT!!!! Any undates??? Its been a few months (12 weeks) since an update on this project from fastsvts.