RP Short Shifter Installed (first impressions)
#726
Hi there,
does anyone have instructions to the RP shifter?
after 2 years use, mine jammed up at the 5th to 6th gear.. now it is locked in reverse and i am unable to shift into the 6th gear
thanks and best rgds
does anyone have instructions to the RP shifter?
after 2 years use, mine jammed up at the 5th to 6th gear.. now it is locked in reverse and i am unable to shift into the 6th gear
thanks and best rgds
#728
He's as bad as Can
http://www.axialflow.com/ss8_diy.htm might also help.
Richard, thanks for a great shifter 4 years & 76,000 miles later all is well!
Richard, thanks for a great shifter 4 years & 76,000 miles later all is well!
#729
Registered
My short shifter order went in Friday! Woot.
Update; it arrived Wednesday, and literally installed in 5 minutes.
I am still getting used to the change, but it is very precise and solid.
Update: Oct 27:
Shifter shifts much faster, very short stroke.
I think the overall shifting effort is, very slightly, higher than the stock shifter.
But:
Shifts are 2/3 the speed of stock; this thing is fast.
Shifts are solid, I have not missed a gear since the short shifter was installed.
I hear/feel more transmission noise now, this may be a bad omen....
Update; it arrived Wednesday, and literally installed in 5 minutes.
I am still getting used to the change, but it is very precise and solid.
Update: Oct 27:
Shifter shifts much faster, very short stroke.
I think the overall shifting effort is, very slightly, higher than the stock shifter.
But:
Shifts are 2/3 the speed of stock; this thing is fast.
Shifts are solid, I have not missed a gear since the short shifter was installed.
I hear/feel more transmission noise now, this may be a bad omen....
Last edited by Rote8; 10-27-2010 at 08:57 PM.
#731
The bushing is relatively ok.
would posting pictures of the shifter help in identifying the problem?
#732
Rotary Addict
Richard,
I inspected my lower bushing the past weekend. I believe that I'm due for a new one. There was considerable wear on the current piece. Thanks for your help.
I inspected my lower bushing the past weekend. I believe that I'm due for a new one. There was considerable wear on the current piece. Thanks for your help.
#738
Registered
Join Date: May 2010
Location: Diamond Bore, CA (LA-OC-SB)
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
Is it possible to install the shifter the wrong way? Just curious since there seems to be more reduction in the left to right movement that forward and backwards. I could be that I am just used to the shifter now.
#741
#744
Registered
iTrader: (5)
Sorry I didn't respond sooner.
We are active right now on the development of the 09/10 unit for 6 speeds.
Also at the same time we are building one for the Miata 6 speed.
We had a setback due to moving the shop a few blocks away.
The machines get moved tomorrow and should be runnibg by Friday.
We had the first test unit built and installed in a car but it wasn't right.
We will try again soon.
#745
Registered
iTrader: (15)
Sorry I didn't respond sooner.
We are active right now on the development of the 09/10 unit for 6 speeds.
Also at the same time we are building one for the Miata 6 speed.
We had a setback due to moving the shop a few blocks away.
The machines get moved tomorrow and should be runnibg by Friday.
We had the first test unit built and installed in a car but it wasn't right.
We will try again soon.
We are active right now on the development of the 09/10 unit for 6 speeds.
Also at the same time we are building one for the Miata 6 speed.
We had a setback due to moving the shop a few blocks away.
The machines get moved tomorrow and should be runnibg by Friday.
We had the first test unit built and installed in a car but it wasn't right.
We will try again soon.
*cough* btw if you need someone to test out your final product for free, i will be more than willing to "burdon" myself with such a "tremendously hard" and "very tedious" task, you know ... for the greater good of the 09-10 community..*cough*
#747
Registered
iTrader: (5)
We are active with the 09-11 prototyping. However we just moved the shop a few blocks from the old one. It always takes time to get reorganized. The machines are up and running but stuff still needs to find it's place.
The good news is that the 04-08 units are getting built now and if anyone out there ordered one and has not recieved it this is why. All orders have now been shipped either yesterday or today.
We are still running some but there are a few on the shelf now so no waiting.
Thx, RAP
The good news is that the 04-08 units are getting built now and if anyone out there ordered one and has not recieved it this is why. All orders have now been shipped either yesterday or today.
We are still running some but there are a few on the shelf now so no waiting.
Thx, RAP
#750
Registered
iTrader: (5)
How did you know? I just finished the drawings this afternoon for what should be the final design. Unlike the 04-08 unit these require some molded and stamped parts that need to be outsorced. I can't say what their lead time is so I've no release date for you.
I will let you know when we do the test car install. For that we can hand cut some parts that will in production be made another way.
I will let you know when we do the test car install. For that we can hand cut some parts that will in production be made another way.