I just dynoed 240 rear wheel HP! Bye,Bye, 14.3 seconds
#151
Even My Dog Searches
iTrader: (1)
Originally Posted by Tony Orlando
...but it's doubtful he wants to share it with a bunch of ******** who want to play word games about what exactly qualifies as stock.
And if he's worried about getting in trouble with Mazda, that in itself is reason enough to refrain from posting at all. I am not calling him a liar, there's just more valuable information on this forum than all us members having to "believe" Ito, or better yet, sift through endless posts by him to decipher what the heck he is talking about.
#152
Squishy Like a Lufa?
Join Date: Oct 2003
Location: Austin TX
Posts: 213
Likes: 0
Received 0 Likes
on
0 Posts
I am less skeptical than I was at the beginning of this thread... a N/A 60 rwhp boost would be fantastic. It looks like a supercharger would still be needed to add a little more low end grunt, it will be interesting to compare dyno's of FI to this (if we are ever able to see the full dyno sheet that is, and know what exactly was changed).
I wonder what Mazda's engineering dept. would market a this system at 300-315hp? .
I wonder what Mazda's engineering dept. would market a this system at 300-315hp? .
#153
Cones need lovin' too!
Join Date: Aug 2003
Location: Beavercreek, Ohio
Posts: 649
Likes: 0
Received 0 Likes
on
0 Posts
I concur with the two gentlemens' posts above (Tony and NAV). Let the man do his thing and unless you have any constructive information to offer, shut it! You're cluttering the thread. What kind of rotary owners do we have in this forum anyway? It is embarrassing that I get labeled as "one of those 8 owners" because of the kind of arrogant whiny posts in this thread.
Keep up the good work Ito.
Keep up the good work Ito.
Last edited by ranger4277; 08-23-2004 at 09:54 PM.
#154
BLAAAAAAAHHHHH!!!!
Join Date: Jun 2004
Location: Chicago
Posts: 367
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Tony Orlando
The "lead up" is everyone bitching. Ito probably would have followed up with some info, but it's doubtful he wants to share it with a bunch of ******** who want to play word games about what exactly qualifies as stock. I've got the answer right here: Who the hell cares??!!
#155
Banned
iTrader: (3)
Originally Posted by Tony Orlando
No wonder he's a moderator on RX-7 club and only an occasional visitor here.
With the phenomenal level of bullsh*ting and crotch grabbing that goes on in that forum, I'm not surprised.
As whiny as this forum is, the level of fabrication that gets elevated to "fact" over there is enchanting.
#156
Its great that his engine hasn't blown ! That shows that the Renesis can hold its own under more stressful conditions. Great news for Charles and his N2O projects.
Good luck with your adventures with the Renesis !
Good luck with your adventures with the Renesis !
#157
i'm analyzing Judge Ito 14.3 timeslip and I find it very odd. Let me explain. Here is his timeslip when he did the 14.5 and 14.6 (missing 4th)
R/T .358
60. 2.17
330. 6.07
1/8. 9.35
MPH 75.64
1000. 12.17
1/4. 14.57
MPH. 94.07
R/T. .455
60.1.98
330. 5.98
1/8. 9.29
MPH. 76.03
1000. 12..09
1/4. 14.66
MPH. 93.33
now here is his timeslip for his 14.3 run:
car # 223
R/T .365
60 .2.409
330 .6.403
1/8 .9.073
MPH .75.42
990 .12.388
1/4 .14.324
MPH .95.77
if you just compare the times...he runs slower in the 60 foot, 330, 1/8 mph, and 1000 in the 14.3 compare to the other runs, 14.5 and 14.6 but still manage somehow to run a 14.3. THe only thing that was faster on the 14.3 timeslip is the 1/8 time. I just find that odd. Or maybe the RX8 doesn't have much topend pull at all.
R/T .358
60. 2.17
330. 6.07
1/8. 9.35
MPH 75.64
1000. 12.17
1/4. 14.57
MPH. 94.07
R/T. .455
60.1.98
330. 5.98
1/8. 9.29
MPH. 76.03
1000. 12..09
1/4. 14.66
MPH. 93.33
now here is his timeslip for his 14.3 run:
car # 223
R/T .365
60 .2.409
330 .6.403
1/8 .9.073
MPH .75.42
990 .12.388
1/4 .14.324
MPH .95.77
if you just compare the times...he runs slower in the 60 foot, 330, 1/8 mph, and 1000 in the 14.3 compare to the other runs, 14.5 and 14.6 but still manage somehow to run a 14.3. THe only thing that was faster on the 14.3 timeslip is the 1/8 time. I just find that odd. Or maybe the RX8 doesn't have much topend pull at all.
#158
What makes you people think taking a stock renesis motor, and modifying and adding things to it, especially nos, makes this anything special. You can do this with any car. What if I were to take a 100 shot and add it to my sti. If you run nos, you can take the word STOCK right out of the equation. Don't be fooled by this so called secret. What he is doing to his car is not something most of you would ever dream of doing, unless you have lots of money to **** away, and don't mind ruining your car. I do find it funny how all of you actually look at this as something you cna do to make your rx8 faster. This is tweaking and manipulation out of a motor that should not be used this way. He's already fried several trannies, he's going to see what he can get out of this motor, and let it blow up. PLEASE someone explain this to me. I'm not hating anything, but I don't understand the interest in this. DO YOU THINK YOU CAN DO THIS TO YOUR CAR< AND MAKE IT A 239HP DAILY DRIVER? Do you think it's going to be safe and reliable on engine? You can't spray NOS at every light, so 239whp is jack crap with the cheating canister. You all have fun with this, but get those crazy thoughts out of your heads. This guy has money to burn, and a car to destroy,, so let him be.
#159
Banned
iTrader: (3)
R/T .358
60. 2.17
330. 6.07
1/8. 9.35
MPH 75.64
1000. 12.17
1/4. 14.57
MPH. 94.07
R/T. .455
60.1.98
330. 5.98
1/8. 9.29
MPH. 76.03
1000. 12..09
1/4. 14.66
MPH. 93.33
R/T .365
60 .2.409
330 .6.403
1/8 .9.073
MPH .75.42
990 .12.388
1/4 .14.324
MPH .95.77
60. 2.17
330. 6.07
1/8. 9.35
MPH 75.64
1000. 12.17
1/4. 14.57
MPH. 94.07
R/T. .455
60.1.98
330. 5.98
1/8. 9.29
MPH. 76.03
1000. 12..09
1/4. 14.66
MPH. 93.33
R/T .365
60 .2.409
330 .6.403
1/8 .9.073
MPH .75.42
990 .12.388
1/4 .14.324
MPH .95.77
The curb weight for an RX-8 GT is 3053. Add 170lbs for a driver and 30lbs for a 1/3 tank of gas and we have a 3253lb starting weight.
Using the MPH calculation (hp=weight*(speed/234)^3), we get 211, 206 and 223 HP for the 14.5, 14.6 and 14.3 ET runs, respectively.
Using the ET calculation (hp=weight*(speed/234)^3), we get 208, 204 and 219 HP respectively.
It gets more interesting when you do the 1/8 mile derivations from the 1/4 mile times and 1/4 mile extrapolations from the 1/8 mile times.
The formulas are:
1/4 Mile ET = (1/8 Mile ET + .22) / .655
1/8 Mile ET = (1/4 Mile ET * .655) - .22
Based on the 1/4 mile times, the 1/8 mile times should have been 9.32, 9.382 and 9.162.
In the other direction, the 1/8 miles times should have been 14.66, 14.52 and 14.12.
Obviously, there is something more than traction issues going on here.
Last edited by MazdaManiac; 08-23-2004 at 11:25 PM.
#160
NOT SEARCHING
Join Date: Aug 2003
Location: Olathe, KS
Posts: 753
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Judge Ito
I understand your point and I also understand every forum members point. All I could say is: Ito is a very well known name around my neck of the woods. So is J.R.'s Rotary Performance(my rotary shop) a modification has been done to the car, but the car looks and is in a bone stock form. For my own protection the Rx8 is bone stock.
I guess they'll have to race under an alias. I think it's great that you have made more power, I just would really like to know how. It's tough having a fully kitted 8 on 19's that is slower than stock b/c my wheels are too heavy.
#161
Registered User
Join Date: May 2004
Location: Markham
Posts: 56
Likes: 0
Received 0 Likes
on
0 Posts
Well I've been watching this thread since the beginning and kept my mouth shut so far...it's been a fun thread to follow. First off...Ito good on you. Have fun with it. Secondly I agree with VikingDJ even if we did know what he was doing would any of you want to? He's frying tires and prob clutches trying to get the most out of the engine. Stop with the semantics about what's stock and what is not. I think we should all wish Ito luck.
#162
THREAD KILLER
Join Date: Sep 2003
Location: San Jose, California
Posts: 1,342
Likes: 0
Received 0 Likes
on
0 Posts
I think it's fun how someone is taking the steps forward to making the RX-8 faster, regardless if you can do it to your car or not. I'm a big fan of the RX-8 and that is why I lurk around this forum and get excited everytime I hear great news about it. The crybabies really ruin the flow of info here. Instead of asking certain questions, they start taunting each and everyone about providing proof for something. We are not writing Peer Journals here people, this is a forum! Cry elsewhere.
I do agree with the "RX8 ****" thing, there is a lot of "Hey, you tell us or you're a ********" attitude or microanalysis of every bit of what someone says and then call them a "********" for their analysis.
Lighten up everyone, this is a forum. People are here to tell everyone what they have to say including what they don't want to say.
I'll check again tomorrow and see what this thread becomes.
I do agree with the "RX8 ****" thing, there is a lot of "Hey, you tell us or you're a ********" attitude or microanalysis of every bit of what someone says and then call them a "********" for their analysis.
Lighten up everyone, this is a forum. People are here to tell everyone what they have to say including what they don't want to say.
I'll check again tomorrow and see what this thread becomes.
#163
Originally Posted by MazdaManiac
Well, we can do some math from there, too.
The curb weight for an RX-8 GT is 3053. Add 170lbs for a driver and 30lbs for a 1/3 tank of gas and we have a 3253lb starting weight.
Using the MPH calculation (hp=weight*(speed/234)^3), we get 211, 206 and 223 HP for the 14.5, 14.6 and 14.3 ET runs, respectively.
Using the ET calculation (hp=weight*(speed/234)^3), we get 208, 204 and 219 HP respectively.
It gets more interesting when you do the 1/8 mile derivations from the 1/4 mile times and 1/4 mile extrapolations from the 1/8 mile times.
The formulas are:
1/4 Mile ET = (1/8 Mile ET + .22) / .655
1/8 Mile ET = (1/4 Mile ET * .655) - .22
Based on the 1/4 mile times, the 1/8 mile times should have been 9.32, 9.382 and 9.162.
In the other direction, the 1/8 miles times should have been 14.66, 14.52 and 14.12.
Obviously, there is something more than traction issues going on here.
The curb weight for an RX-8 GT is 3053. Add 170lbs for a driver and 30lbs for a 1/3 tank of gas and we have a 3253lb starting weight.
Using the MPH calculation (hp=weight*(speed/234)^3), we get 211, 206 and 223 HP for the 14.5, 14.6 and 14.3 ET runs, respectively.
Using the ET calculation (hp=weight*(speed/234)^3), we get 208, 204 and 219 HP respectively.
It gets more interesting when you do the 1/8 mile derivations from the 1/4 mile times and 1/4 mile extrapolations from the 1/8 mile times.
The formulas are:
1/4 Mile ET = (1/8 Mile ET + .22) / .655
1/8 Mile ET = (1/4 Mile ET * .655) - .22
Based on the 1/4 mile times, the 1/8 mile times should have been 9.32, 9.382 and 9.162.
In the other direction, the 1/8 miles times should have been 14.66, 14.52 and 14.12.
Obviously, there is something more than traction issues going on here.
60. 2.27
330. 6.059
1/8. 9.047
MPH 78.86
1/4. 14.03
MPH. 100.2
this was done with i/h/e on a 2001 celica gts. Weigh of it is 2500 (curb weight) add 170 hp (same figure you use). Also 1/3 gas = 30 lbs. So weight is 2700
lets see.
HP = weight * (speed/234)^3 = 212 HP on that run...wow...i didn't think I was making that much. I dyno my car and it was 182 hp. Now that I'm making 193 to the wheel, I guess next time I go to the track, I should be hitting 103-104 trapspeed which mean I would be making, 230 hp to the wheel.... wow. I like your formula...I should go tell everyone that I'm making 230 hp now, woo hoo. haha.
To be a little serious, here is my video: :D
http://www.aracheon.com/videos/crazy...agtsfinal1.wmv
I also have the gtech pro (the newest one) and I have ran a 13.6-13.7 with it in cool weather. I ran a couple of weeks ago and this is what I ran with it.
#164
Whatever he did to the car can possibly be compatible for daily driving. If he is getting times the way he did when he was STOCK - then it is going to cause damage. I remember he practically redlined it then dropped the clutch. That'll jack almost any car up....so I think with daily driving - not drag racing, it'll be fine......................................WHATEVER IT IS ????=)
#165
Son what is your Alibi?
iTrader: (1)
Dear God guys I go on vacation for 1 weekend and you guys bash one of the best contributors to the rotary community... wtf is wrong with some of you.
I spoke with ITO on the phone no he didn't NOS or Boost the engine and no I don't know what he did.
His motor is bone stock, because when he broke his tranny for the 2nd time while he was at the dealership a rep from Mazda Corporate comes in asks him flat out "are you Judge ITO" and then shows him a Binder 500pages long of all the posts he’s made here on rx8/7club and nopistons. If i was him hell my motor would be bonier then stock.
As for what i think he did he is the "porting God" according to most people so im going to say he ported and polished the motor and then tuned for it. Acosta did this same thing with their Red Renesis Rx-8 and made 220whp.
And if he did raise the redline to above 10k you should all be applauding him that his motor can do it reliably assuming that something was done to counteract the pressure built up on the apex seals going over the epitrochoid. (Above 10k you get a horrible vibration there, usually you have to find a different way to spring the seals.) Least that’s my understanding, some full blown race engines use gas compression to do it.
And one last think all you ******* who say that only Judge ITO can run 14.5's because he’s running "95oct" this and that "pro drag racer" My timeslip from Gateway while i was in St.Louis can be found in the new sticky here: https://www.rx8club.com/rx-8-racing-25/14-58-%40-94-55mph-37357/
I spoke with ITO on the phone no he didn't NOS or Boost the engine and no I don't know what he did.
His motor is bone stock, because when he broke his tranny for the 2nd time while he was at the dealership a rep from Mazda Corporate comes in asks him flat out "are you Judge ITO" and then shows him a Binder 500pages long of all the posts he’s made here on rx8/7club and nopistons. If i was him hell my motor would be bonier then stock.
As for what i think he did he is the "porting God" according to most people so im going to say he ported and polished the motor and then tuned for it. Acosta did this same thing with their Red Renesis Rx-8 and made 220whp.
And if he did raise the redline to above 10k you should all be applauding him that his motor can do it reliably assuming that something was done to counteract the pressure built up on the apex seals going over the epitrochoid. (Above 10k you get a horrible vibration there, usually you have to find a different way to spring the seals.) Least that’s my understanding, some full blown race engines use gas compression to do it.
And one last think all you ******* who say that only Judge ITO can run 14.5's because he’s running "95oct" this and that "pro drag racer" My timeslip from Gateway while i was in St.Louis can be found in the new sticky here: https://www.rx8club.com/rx-8-racing-25/14-58-%40-94-55mph-37357/
#166
rev it up
ITO
Just ignore all the crap that people are dishing out on this link.
Thank you for opening our minds to the possibilities and we should all wait for further developments as they arise.
I am afraid that in todays society of wanting (demanding) things now by spoilt people is causing unnecessary aggravation with some people out there. This is not your problem...they need to deal with it.
Keep up the good work.
skc
Just ignore all the crap that people are dishing out on this link.
Thank you for opening our minds to the possibilities and we should all wait for further developments as they arise.
I am afraid that in todays society of wanting (demanding) things now by spoilt people is causing unnecessary aggravation with some people out there. This is not your problem...they need to deal with it.
Keep up the good work.
skc
#167
Registered
I like ITO and admit he is very good at what he does. He has always been a valuable member of the rotary community. Based on what has been said, I am going to list it here so we can all see how this 240 rwhp engine is setup.
Before I do, I need to address one thing. Engine porting isn't stock! Not even close.
Let's analyze what hasn't been done to the car based on what has been posted here. THis also assumes this info is accurate.
1. No intake. Stock.
2. No exhaust. Stock.
3. No forced induction. (supercharger, turbocharger)
4. No nitrous. Stock.
5. No porting. Stock.
6. No ecu tuning. Stock.
I'll be a good sport and consider a new flywheel stock whether it has one or not. I'll also be nice and accept raising the redline as stock even though power falls off before this point and is going back down before fuel cutoff kicks in. No point in going there with a "stock" intake manifold.
The no nitrous comment really seems fishy to me after seeing a huge power jump at about 6000 rpm. It really does look like a 50 shot of nitrous. I would accept this as the only mod that can leave all of the factory existing parts on a car which would keep it "stock'. In my eyes though anything that didn't come with the car that was added later constitutes a mod.
Assuming everything above is accurate, there are only a few possibilities that it can be if there is in fact no nitrous.
1. His car is a freak of the batch. (unlikely)
2. He discovered and fixed a problem that every RX-8 has but no one knows about. (unlikely)
3. Mazda gave him a new ecu that was tuned properly at the factory such as a modified Mazdaspeed unit. (unlikely)
4. The dyno numbers are false. (I don't believe this to be the case BTW) (he is too reputable so I'll call this unlikely)
With the above info, how are we to believe that the car is in fact totally 100% stock but putting down 220 rwhp? No one else has so why is this car so special? Everyone is wondering this. What is pissing people off is that there is no proof and no feasible way it is true based off of current info. The fact that Ito has 220 rwhp actually isn't the issue. The issue is with the car being 100% factory stock. It can't be!
Ito ran a 14.3 when no one else did because no one else plays with their tire pressure like he does. No one else can get off the line as good.
Ito is a smart guy and if he says he has 220 rwhp, he has 220 rwhp! Please accept the fact that he may be saying the car is stock because Mazda is taking notes on him (I vote unlikely on the 500 documented pages comment also!) and he is worried about warranty work. I still think it is a conservative nitrous shot that is the only mod to an otherwise stock car. All of the evidence points to that.
Before I do, I need to address one thing. Engine porting isn't stock! Not even close.
Let's analyze what hasn't been done to the car based on what has been posted here. THis also assumes this info is accurate.
1. No intake. Stock.
2. No exhaust. Stock.
3. No forced induction. (supercharger, turbocharger)
4. No nitrous. Stock.
5. No porting. Stock.
6. No ecu tuning. Stock.
I'll be a good sport and consider a new flywheel stock whether it has one or not. I'll also be nice and accept raising the redline as stock even though power falls off before this point and is going back down before fuel cutoff kicks in. No point in going there with a "stock" intake manifold.
The no nitrous comment really seems fishy to me after seeing a huge power jump at about 6000 rpm. It really does look like a 50 shot of nitrous. I would accept this as the only mod that can leave all of the factory existing parts on a car which would keep it "stock'. In my eyes though anything that didn't come with the car that was added later constitutes a mod.
Assuming everything above is accurate, there are only a few possibilities that it can be if there is in fact no nitrous.
1. His car is a freak of the batch. (unlikely)
2. He discovered and fixed a problem that every RX-8 has but no one knows about. (unlikely)
3. Mazda gave him a new ecu that was tuned properly at the factory such as a modified Mazdaspeed unit. (unlikely)
4. The dyno numbers are false. (I don't believe this to be the case BTW) (he is too reputable so I'll call this unlikely)
With the above info, how are we to believe that the car is in fact totally 100% stock but putting down 220 rwhp? No one else has so why is this car so special? Everyone is wondering this. What is pissing people off is that there is no proof and no feasible way it is true based off of current info. The fact that Ito has 220 rwhp actually isn't the issue. The issue is with the car being 100% factory stock. It can't be!
Ito ran a 14.3 when no one else did because no one else plays with their tire pressure like he does. No one else can get off the line as good.
Ito is a smart guy and if he says he has 220 rwhp, he has 220 rwhp! Please accept the fact that he may be saying the car is stock because Mazda is taking notes on him (I vote unlikely on the 500 documented pages comment also!) and he is worried about warranty work. I still think it is a conservative nitrous shot that is the only mod to an otherwise stock car. All of the evidence points to that.
#168
Son what is your Alibi?
iTrader: (1)
No the Binder of posts is straight from the horses (ITO’s) mouth that really did happen...
All he is doing is covering his own *** for an incident like that again so just let it go and "believe" that the motor is "bone stock"
He didn't know that Mazda was monitoring him as closely as they were until he went to the dealer for the 2nd time his tranny broke.
He’s posting this info because he wants to share his plethora of information with this community but he cannot to the point that it incriminates him if something does blow up and he needs his warranty.
All he is doing is covering his own *** for an incident like that again so just let it go and "believe" that the motor is "bone stock"
He didn't know that Mazda was monitoring him as closely as they were until he went to the dealer for the 2nd time his tranny broke.
He’s posting this info because he wants to share his plethora of information with this community but he cannot to the point that it incriminates him if something does blow up and he needs his warranty.
#169
Originally Posted by rotarygod
Ito ran a 14.3 when no one else did because no one else plays with their tire pressure like he does. No one else can get off the line as good.
.
.
#171
Registered
Thread Starter
Join Date: Sep 2003
Location: NJ USA
Posts: 144
Likes: 0
Received 0 Likes
on
0 Posts
When the time is right I'll let the cat out the bag. If Rx tuner is interested we might have a write up on the magazine about the mod I decided to do to my Rx8. Porting and polishing might be an option but it will void engine warranty. I am not saying I ported my engine. I have to decide what is best for my own protection. And I'll share the info. with fellow rotary engine enthusiasts when I'm ready. If and when I decide to let the info. out. I will make note of all the negative vibe I've gotten here. I am more of an asset to this rotary world we live in then a liability. Thanks to the members that have shown respect for my dedication to Mazda and the rotary engine.
#172
Originally Posted by Judge Ito
When the time is right I'll let the cat out the bag. If Rx tuner is interested we might have a write up on the magazine about the mod I decided to do to my Rx8. Porting and polishing might be an option but it will void engine warranty. I am not saying I ported my engine. I have to decide what is best for my own protection. And I'll share the info. with fellow rotary engine enthusiasts when I'm ready. If and when I decide to let the info. out. I will make note of all the negative vibe I've gotten here. I am more of an asset to this rotary world we live in then a liability. Thanks to the members that have shown respect for my dedication to Mazda and the rotary engine.
anyhow, you are a god among men Ito, I look forward to the rx tuner article!
#173
I AM SUPER MAN
Join Date: Jul 2003
Location: FAIR LAWN, NJ
Posts: 270
Likes: 0
Received 0 Likes
on
0 Posts
Ito Mete Mano Que Esta Gente Son Una Valsa De Hijo De La Granput*, Celosos De Lo Que Usted Esta Haciendo,....
Keep Up The Good Work, I Look Forward Next Year When I Get My White 05..\
Stalin
Keep Up The Good Work, I Look Forward Next Year When I Get My White 05..\
Stalin
#174
Registered User
iTrader: (1)
Join Date: Jan 2004
Location: WHITE HOUSE
Posts: 1,752
Likes: 0
Received 0 Likes
on
0 Posts
Polak i dont know were you getting that acosta red rx8 made 220 but its wrong unless they did that in the last week or so.that thing is not ported.the only thing he has is something like an piggy back which controls the fuel and ignition . the only thing they got out of that was 9 hp they wanted to put it in my car but to me it was not worth cutting wires for 9 hp, if you read my old post i was there trying to tune my canzoomer unit about 3 weeks ago but no luck.
#175
if your not 1st your last
Originally Posted by smrx8
Polak i dont know were you getting that acosta red rx8 made 220 but its wrong unless they did that in the last week or so.that thing is not ported.the only thing he has is something like an piggy back which controls the fuel and ignition . the only thing they got out of that was 9 hp they wanted to put it in my car but to me it was not worth cutting wires for 9 hp, if you read my old post i was there trying to tune my canzoomer unit about 3 weeks ago but no luck.
Last edited by Kel Rx8; 08-24-2004 at 09:37 AM.