'07 Rolex Daytona 24hr Test Results
After reviewing all 8 practices @ daytona, I noticed that the #69 got signficantly faster every practice. The #70 and #69 car is about even in lap times. Also the Spencer car got faster as well. And while i hate to do this, we can leave the goldin bro car out.. it is very slow. but lets hope they finish the race (if they're in a low power setting for reliability reasons). So watch out for the 2 Speedsource cars and a very flashy orange spencer car.
Does anyone know the driver lineup? I dont think randy pobst will drive in the same #70 car as mr.tremblay and mr.haskell
________
Live sex webshows
Does anyone know the driver lineup? I dont think randy pobst will drive in the same #70 car as mr.tremblay and mr.haskell
________
Live sex webshows
Last edited by Renesis_8; Sep 11, 2011 at 11:12 AM.
Originally Posted by Renesis_8
After reviewing all 8 practices @ daytona, I noticed that the #69 got signficantly faster every practice. The #70 and #69 car is about even in lap times. Also the Spencer car got faster as well. And while i hate to do this, we can leave the goldin bro car out.. it is very slow. but lets hope they finish the race (if they're in a low power setting for reliability reasons). So watch out for the 2 Speedsource cars and a very flashy orange spencer car.
Does anyone know the driver lineup? I dont think randy pobst will drive in the same #70 car as mr.tremblay and mr.haskell
Does anyone know the driver lineup? I dont think randy pobst will drive in the same #70 car as mr.tremblay and mr.haskell

Originally Posted by Bern
8 70 GT Haskell/ Tremblay/ Ham/ Pobst SpeedSource Mazda RX-8 01:53.4 113.008
15 69 GT Assentato/ Longhi/ Segal/ Varde SpeedSource Mazda RX-8 01:54.2 112.186
16 63 GT Spencer/ Spencer/ Grupp/ Espen Team Spencer Motorsports Mazda RX-8 01:54.4 112.06
30 8 GT Steve Goldin Goldin Brothers Racing Mazda RX-8 01:59.6 107.131
15 69 GT Assentato/ Longhi/ Segal/ Varde SpeedSource Mazda RX-8 01:54.2 112.186
16 63 GT Spencer/ Spencer/ Grupp/ Espen Team Spencer Motorsports Mazda RX-8 01:54.4 112.06
30 8 GT Steve Goldin Goldin Brothers Racing Mazda RX-8 01:59.6 107.131
Originally Posted by Renesis_8
After reviewing all 8 practices @ daytona, I noticed that the #69 got signficantly faster every practice. The #70 and #69 car is about even in lap times. Also the Spencer car got faster as well. And while i hate to do this, we can leave the goldin bro car out.. it is very slow. but lets hope they finish the race (if they're in a low power setting for reliability reasons). So watch out for the 2 Speedsource cars and a very flashy orange spencer car.
Does anyone know the driver lineup? I dont think randy pobst will drive in the same #70 car as mr.tremblay and mr.haskell
Does anyone know the driver lineup? I dont think randy pobst will drive in the same #70 car as mr.tremblay and mr.haskell
I think speedsource is sand bagging
Originally Posted by L8APEX
yeah, i forgot about the Vette's, there are not many of them, and they are really not all that competitive. I did not know that Infiniti was going to be running a car. Should be along the same lines as the 350 entry. A little bigger, but similar.
2-14 Mazda RX8 (Prep 2)
2-14.1 20B Cosmo three rotor (Mazda Spec parts). 2.0 liter, 9.7 compression ratio,
3-52mm throttle bodies, maximum of 6 injectors, maximum fuel pressure 4.2 bar,
intake manifold is free. Call Grand American for parts list 386 947 6681
2-14.2 Minimum weight 2200 lbs
2-14.3 Six-speed transmission.
2-14.4 Maximum body width is 73.5 inches.
2-14.5 Front tire 280 /640/18
2-14.6 Engine set-back 5.125 inches from spindle centerline to 1st spark plug.
2-14.7 Complete rear wing height w/ end plates cannot exceed roof height.
2-14.8 Fuel capacity 24 gallons May use oil in fuel
2-14.9 Allowed larger/higher exhaust position .
2-14.10 Tire sizes are 280/640R18 front and 295/660R18 rear
The RX-8 has a huge advantage on weight, even compared to other tube framed cars. Maybe for the lack of torque. Main competitors are stock LS2 @ 2500-2600 pounds. Anyone know how much hp the LS2 makes in these GT cars?
This RX-8 should be VERy VERY competitive. It should really... REALLY be the fastest in the twisties.
Also half of the cars in Grand-Am GT are tube frames...
________
EFFECTS OF ZOLOFT
2-14.1 20B Cosmo three rotor (Mazda Spec parts). 2.0 liter, 9.7 compression ratio,
3-52mm throttle bodies, maximum of 6 injectors, maximum fuel pressure 4.2 bar,
intake manifold is free. Call Grand American for parts list 386 947 6681
2-14.2 Minimum weight 2200 lbs
2-14.3 Six-speed transmission.
2-14.4 Maximum body width is 73.5 inches.
2-14.5 Front tire 280 /640/18
2-14.6 Engine set-back 5.125 inches from spindle centerline to 1st spark plug.
2-14.7 Complete rear wing height w/ end plates cannot exceed roof height.
2-14.8 Fuel capacity 24 gallons May use oil in fuel
2-14.9 Allowed larger/higher exhaust position .
2-14.10 Tire sizes are 280/640R18 front and 295/660R18 rear
The RX-8 has a huge advantage on weight, even compared to other tube framed cars. Maybe for the lack of torque. Main competitors are stock LS2 @ 2500-2600 pounds. Anyone know how much hp the LS2 makes in these GT cars?
This RX-8 should be VERy VERY competitive. It should really... REALLY be the fastest in the twisties.
Also half of the cars in Grand-Am GT are tube frames...
________
EFFECTS OF ZOLOFT
Last edited by Renesis_8; Sep 11, 2011 at 11:15 AM.
Originally Posted by Renesis_8
2-14 Mazda RX8 (Prep 2)
2-14.1 20B Cosmo three rotor (Mazda Spec parts). 2.0 liter, 9.7 compression ratio,
3-52mm throttle bodies, maximum of 6 injectors, maximum fuel pressure 4.2 bar,
intake manifold is free. Call Grand American for parts list 386 947 6681
2-14.2 Minimum weight 2200 lbs
2-14.3 Six-speed transmission.
2-14.4 Maximum body width is 73.5 inches.
2-14.5 Front tire 280 /640/18
2-14.6 Engine set-back 5.125 inches from spindle centerline to 1st spark plug.
2-14.7 Complete rear wing height w/ end plates cannot exceed roof height.
2-14.8 Fuel capacity 24 gallons May use oil in fuel
2-14.9 Allowed larger/higher exhaust position .
2-14.10 Tire sizes are 280/640R18 front and 295/660R18 rear
The RX-8 has a huge advantage on weight, even compared to other tube framed cars. Maybe for the lack of torque. Main competitors are stock LS2 @ 2500-2600 pounds. Anyone know how much hp the LS2 makes in these GT cars?
This RX-8 should be VERy VERY competitive. It should really... REALLY be the fastest in the twisties.
Also half of the cars in Grand-Am GT are tube frames...
2-14.1 20B Cosmo three rotor (Mazda Spec parts). 2.0 liter, 9.7 compression ratio,
3-52mm throttle bodies, maximum of 6 injectors, maximum fuel pressure 4.2 bar,
intake manifold is free. Call Grand American for parts list 386 947 6681
2-14.2 Minimum weight 2200 lbs
2-14.3 Six-speed transmission.
2-14.4 Maximum body width is 73.5 inches.
2-14.5 Front tire 280 /640/18
2-14.6 Engine set-back 5.125 inches from spindle centerline to 1st spark plug.
2-14.7 Complete rear wing height w/ end plates cannot exceed roof height.
2-14.8 Fuel capacity 24 gallons May use oil in fuel
2-14.9 Allowed larger/higher exhaust position .
2-14.10 Tire sizes are 280/640R18 front and 295/660R18 rear
The RX-8 has a huge advantage on weight, even compared to other tube framed cars. Maybe for the lack of torque. Main competitors are stock LS2 @ 2500-2600 pounds. Anyone know how much hp the LS2 makes in these GT cars?
This RX-8 should be VERy VERY competitive. It should really... REALLY be the fastest in the twisties.
Also half of the cars in Grand-Am GT are tube frames...
As I understand it the diference in weight is due to displacement of the engine
A repost link, but since its almost time for the 24hr race...
http://videos.streetfire.net/video/A...517950FE31.htm
________
TeraBelucci
http://videos.streetfire.net/video/A...517950FE31.htm
________
TeraBelucci
Last edited by Renesis_8; Sep 11, 2011 at 11:15 AM.
Hey guys, since Mazdaspeed sells these cars for 200k each, do you think they come with brand new 20B race engine shipped from Japan? Cause I think i saw in the LMP2 thread, that engines the ALMS team used were all rebuilt engines from parts that are very old.
________
Prilosec side effects
________
Prilosec side effects
Last edited by Renesis_8; Sep 11, 2011 at 11:16 AM.
Originally Posted by Renesis_8
Hey guys, since Mazdaspeed sells these cars for 200k each, do you think they come with brand new 20B race engine shipped from Japan? Cause I think i saw in the LMP2 thread, that engines the ALMS team used were all rebuilt engines from parts that are very old.
Originally Posted by Tirminyl
That are done right.
the only things that are used from old engines are the scentric shaft, and the center plate, and I think some berins, at least this where the parts used by BK motorsport
Originally Posted by legokcen
Here's a track map. Anywhere you all want to meet up?
*PICTAR REMOV'D FOR TEH SPASE SAVE!*
*PICTAR REMOV'D FOR TEH SPASE SAVE!*
Originally Posted by Rhawb
I vote we meet by that kink along the back "straight" in the infield. I'll be the short guy. (seriously) Either that or over by the FanZone - that's a pretty easy place to spot as well.
are you talking about the hairpin? it is a good viewing area, and you can walk all the way down to where they enter the backstrech.
beers
Here are the drivers lineup:
69 GT SpeedSource
Emil Assentato, Locust Valley, NY
Nick Longhi, Nyack, NY
Jeff Segal, Miami, FL
Joe Varde, Merrit Island, FL
Matt Plumb, Newport, RI
Mazda RX-8 FXDD
70 GT SpeedSource
David Haskell, Plantation, FL
Sylvain Tremblay, Coral Springs, FL
Nick Ham, Evergreen, CO
Randy Pobst, Gainesville, GA
Mazda RX-8 Mazda/ Mazdaspeed
I have a feeling the #70 car will be very quick around the track. I hope they can finish the race this time.
________
LovelyKira
69 GT SpeedSource
Emil Assentato, Locust Valley, NY
Nick Longhi, Nyack, NY
Jeff Segal, Miami, FL
Joe Varde, Merrit Island, FL
Matt Plumb, Newport, RI
Mazda RX-8 FXDD
70 GT SpeedSource
David Haskell, Plantation, FL
Sylvain Tremblay, Coral Springs, FL
Nick Ham, Evergreen, CO
Randy Pobst, Gainesville, GA
Mazda RX-8 Mazda/ Mazdaspeed
I have a feeling the #70 car will be very quick around the track. I hope they can finish the race this time.
________
LovelyKira
Last edited by Renesis_8; Sep 11, 2011 at 11:16 AM.
Originally Posted by swoope
are you talking about the hairpin? it is a good viewing area, and you can walk all the way down to where they enter the backstrech.
beers
beers

I also have a garage pass if that would be any easier.
Originally Posted by Rhawb
No, it's between the two hairpins - that little left-hand "kink" between them. It's one of the better/more popular viewing areas in the infield. But in order to be less confusing, we can just go to the Fanzone.
I also have a garage pass if that would be any easier.
I also have a garage pass if that would be any easier.
the viewing areas you describe are great.. do they put up jumbotrons for this event..
beers
Last edited by Renesis_8; Sep 11, 2011 at 11:23 AM.
Originally Posted by Renesis_8
3 days left...

practice II at 1:30 pm and qualifying at 3:45 pm
Last edited by rotary crazy; Jan 25, 2007 at 06:23 AM.


