gregs turbo install pictures
#1
gregs turbo install pictures
More pictures on post #53,83,96
hey guys im in the process of installing my greddy turbo kit for the second time so this time around i thought of posting some pictures of the install process and some of the goodies i have at the same time....i dont have much free time so this install may take a while due to me spending small amounts of time once or twice a week, i will update as i go along with the install) enjoy!
before:
single car garage where i am performing the install
Greddy oil filter sandwich plate i will be using for oil feed line and oil press gauge
Greddy Oil Pan & Mazsport DR Midpipe with HKS hi-power exhaust
hey guys im in the process of installing my greddy turbo kit for the second time so this time around i thought of posting some pictures of the install process and some of the goodies i have at the same time....i dont have much free time so this install may take a while due to me spending small amounts of time once or twice a week, i will update as i go along with the install) enjoy!
before:
single car garage where i am performing the install
Greddy oil filter sandwich plate i will be using for oil feed line and oil press gauge
Greddy Oil Pan & Mazsport DR Midpipe with HKS hi-power exhaust
Last edited by gregs; 07-04-2009 at 02:17 PM.
#9
this is the second time because i had a major issue with the car driving very horrible under boost and couldnt even idle after going into boost, i figured i had a vacuum leak but just couldnt pinpoint where it was coming from so i removed the turbo kit instead of troubleshooting the problem due to my daily driver car was in the body shop getting paint done so i had no transportation at the time, once i started removing the turbo kit i found a very large leak (silicone seal) at the block off plate greddy supplies for the 6th port i will not use that plate this time around from the research i have done looks like the plate is not needed...so now while the turbo kit was off i was able to purchase a full set of real silicone couplers and t-bolt clamps...btw the car has about 6k miles on it now so i hope once the kit is on it motivates me to drive it more often
Last edited by gregs; 11-26-2008 at 10:11 AM.
#15
Administrator
iTrader: (7)
good luck gregs