Notices
RX-8 Discussion General discussion about the RX-8 that doesn't fit in one of the specialty forums.
Sponsored by:
Sponsored by: CARiD

What did you do with your RX8 today?

Old Mar 13, 2015 | 02:14 AM
  #1976  
GTSimmo's Avatar
Registered
 
Joined: Dec 2006
Posts: 83
Likes: 0


Better view. Water temp guage is 5 degree cooler than what I read through the OBD-II port with DashCommand, more than likely due to where the sensor is mounted. So temp seems accurate unlike their first generation sendors.
Old Mar 13, 2015 | 02:40 AM
  #1977  
El Conquistador's Avatar
Registered
 
Joined: Sep 2014
Posts: 109
Likes: 1
From: Dallas, TX
Oh that's pretty.
Old Mar 13, 2015 | 02:17 PM
  #1978  
Steve Dallas's Avatar
Water Foul
 
Joined: May 2013
Posts: 2,521
Likes: 266
From: Republic of Texas
Originally Posted by EpikYummeh
Without catalyst, I presume? Because the catalyst Charles uses is not rated for racing and you shouldn't need to use a catalyst on the track anyways.

Edit: Just saw your earlier post with the picture of the midpipe, which doesn't have a cat. Enjoy the sweet sound!
No cat for the track. I'll put my cat back on to pass emissions once per year if needed.

I'm still playing the kazoo as I go down the road due to an exhaust leak at the rear joint. I have some hardware on order that should solve that.
Old Mar 13, 2015 | 04:50 PM
  #1979  
Luckyboii69's Avatar
Registered
 
Joined: Oct 2012
Posts: 228
Likes: 0
Originally Posted by GTSimmo


Replaced my 7 year old set of Prosport Gauges with the new Evo line. Installation was a breeze since I was just replacing the gauges and the senders.

Decided to ditch the oil pressure guage for a volt gauage because (1) the electric oil pressure is gargage, I replaced it three times, and (2) I suffered two dead batteries, although alternator is fine, since I owned the car so want to keep an eye on the voltage.

The other two are oil temp and water temp. Oil temp sensor isn't hooked up yet, waiting until next oil change to swap out the senders as the old doesn't work with the new guages (reads way too high).
what type of radio do you have? is that a 6 or 7in?
Old Mar 13, 2015 | 07:39 PM
  #1980  
slash128's Avatar
n3rd
 
Joined: Aug 2009
Posts: 2,133
Likes: 49
From: in my mind
There should be a thread for "What embarrassing thing did you do with your RX8 today". Yesterday I was headed home from work. Got to a red light and was the first car in line. Car stalls. Tried to start and tripped the breaker. I get out to open the trunk and reset the breaker and the plain clothes detective directly behind me leans out his window and asks what I'm doing. I gave a quick explanation as I'm reaching for the breaker and somehow I break the lever off. He lights up his red and blues for traffic. Another plain clothes lady detective just happens to be in the parking lot next to us. She lights up her red and blues. Traffic is piling up at this point. They give me a push across the street where I'm able to put the breaker back together and get going. It was an oddball combination of conditions that haven't happnd before. First time tripping the breaker, only stall when I mess up shifting and 2 nice detectives to witness the whole thing and give me a push
Old Mar 13, 2015 | 08:18 PM
  #1981  
GTSimmo's Avatar
Registered
 
Joined: Dec 2006
Posts: 83
Likes: 0
Originally Posted by Luckyboii69
what type of radio do you have? is that a 6 or 7in?
Pioneer AppRadio 4 about $450 on Amazon US. I think the screen is 6.2 capacitive touch screen.

It's the Pioneer AppRadio 4. It's probably the less expensive way to get Apple Carplay. I really like it alot. You can run a iphone in either Apple Carplay mode (what i run it as most of the time) or Pioneer's own AppRadio mode. Both lets you run a wide variety of apps including Navigation and music streaming apps. Running it Pioneer's app mode lets you run DashCommand and Waze though but I found switching between apps to be clunky to the point of dangerous while driving. Apple Carplay is safer experience.


Note the radio does not have a DVD/CD players. It is completely Smartphone dependent. In fact without a smartphone all it can do is play the am/fm radio lol. I absolute love having Spotify in the car. It'll also play back almost any video format on a USB stick.

Andriod users should check out the new Andriod Auto headunits hitting the stores now.

Last edited by GTSimmo; Mar 13, 2015 at 08:22 PM.
Old Mar 13, 2015 | 08:25 PM
  #1982  
Luckyboii69's Avatar
Registered
 
Joined: Oct 2012
Posts: 228
Likes: 0
Originally Posted by GTSimmo
AppRadio 4 (SPH-DA120) - Smartphone Receiver with 6.2" Capacitive Touchscreen Display, Apple CarPlay?, Bluetooth®, Siri® Eyes Free, Android? Music Support, Pandora®, FLAC Audio Support, and On-Screen Access to Compatible Apps | Pioneer Electronics US

It's the Pioneer AppRadio 4. It's probably the less expensive way to get Apple Carplay. I'm really like it alot. You can run a iphone in either Apple Carplay mode (what i run it as most of the time) or Pioneer's own AppRadio mode. Both lets you run a wide variety of apps including Navigation and music streaming apps. Running it Pioneer's app mode lets you run DashCommand and Waze though but I found switching between apps to be clunky to the point of dangerous while driving. Apple Carplay is safer experience.


Note the radio does not have a DVD/CD players. It is completely Smartphone dependent. In fact without a smartphone all it can do is play the am/fm radio lol. I'm absolute love having Spotify in the car. It'll also play back almost any video format on a USB stick.

Andriod users should check out the new Andriod Auto headunits hitting the stores now.
thanks..yeah I know, Im an android user and looking forward to buy the pioneer avh-4100nex 7inch since the newer models cost 1k and up..a 7 inch display will fit it with no problem right?
Old Mar 13, 2015 | 09:41 PM
  #1983  
GTSimmo's Avatar
Registered
 
Joined: Dec 2006
Posts: 83
Likes: 0
Originally Posted by Luckyboii69
thanks..yeah I know, Im an android user and looking forward to buy the pioneer avh-4100nex 7inch since the newer models cost 1k and up..a 7 inch display will fit it with no problem right?
The headunit will still be standard double din so I don't see why it would be a problem.
Old Mar 14, 2015 | 09:43 PM
  #1984  
reni04's Avatar
Registered
 
Joined: May 2014
Posts: 242
Likes: 1
Total wash/under side as well.Then cleaner wax then yellow wax and buff.Fell in love again.
Old Mar 15, 2015 | 09:55 AM
  #1985  
Luckyboii69's Avatar
Registered
 
Joined: Oct 2012
Posts: 228
Likes: 0
washed her..waiting to get the gtc200 wing and dump the ms


Last edited by Luckyboii69; Mar 15, 2015 at 10:12 AM.
Old Mar 16, 2015 | 01:37 PM
  #1986  
INANE's Avatar
Registered
 
Joined: Sep 2013
Posts: 46
Likes: 0
From: Nebraska
Replaced the downstream O2 sensor for 25 bucks


Old Mar 16, 2015 | 05:30 PM
  #1987  
archwisp's Avatar
Hippie Ricer
iTrader: (1)
 
Joined: Jan 2014
Posts: 326
Likes: 32
From: Kansas City
I got out the pressure washer and cleaned off all of the winter gunk from the bumpers & wheel wells. Undercarriage is next.
Old Mar 16, 2015 | 05:36 PM
  #1988  
alming1132's Avatar
Registered
iTrader: (2)
 
Joined: Jul 2009
Posts: 91
Likes: 0
^Heyyyyy how much for the ms spoiler?? Haha

Originally Posted by Luckyboii69
washed her..waiting to get the gtc200 wing and dump the ms
Old Mar 16, 2015 | 05:52 PM
  #1989  
Luckyboii69's Avatar
Registered
 
Joined: Oct 2012
Posts: 228
Likes: 0
Originally Posted by alming1132
^Heyyyyy how much for the ms spoiler?? Haha
250..clear coated and well maintained but im not selling it now lol
Old Mar 16, 2015 | 06:03 PM
  #1990  
alming1132's Avatar
Registered
iTrader: (2)
 
Joined: Jul 2009
Posts: 91
Likes: 0
Dibs!! Also in the spirit of this thread - wash and wax, back-to-black interior trim pieces, leather conditioning, and best of all - R3 rims on my LY!!! Will post pics soon. What did you do with your RX8 today?-image-3182322452.jpg


Originally Posted by Luckyboii69
250..clear coated and well maintained but im not selling it now lol

Last edited by alming1132; Mar 17, 2015 at 03:23 PM.
Old Mar 19, 2015 | 08:55 PM
  #1991  
fc2se's Avatar
Former FC Owner
iTrader: (2)
 
Joined: Dec 2010
Posts: 77
Likes: 0
From: Dayton, OH



These look even better in person. The improvement in ride quality is really surprising (compared to stock wheels). Should have done this sooner! Got to love the RPF1.

Last edited by fc2se; Mar 19, 2015 at 08:59 PM.
Old Mar 19, 2015 | 11:55 PM
  #1992  
Legot's Avatar
Scrappy
iTrader: (1)
 
Joined: Jun 2014
Posts: 1,193
Likes: 8
From: Arizona
Originally Posted by GTSimmo


Better view. Water temp guage is 5 degree cooler than what I read through the OBD-II port with DashCommand, more than likely due to where the sensor is mounted. So temp seems accurate unlike their first generation sendors.
You have a voltmeter instead of an OPG? Why that when oil pressures the one that's going to vary? (That's the same type of gauge I use for my OPG, they're very nice.)
Old Mar 20, 2015 | 09:14 PM
  #1993  
GTSimmo's Avatar
Registered
 
Joined: Dec 2006
Posts: 83
Likes: 0
Originally Posted by Legot
You have a voltmeter instead of an OPG? Why that when oil pressures the one that's going to vary? (That's the same type of gauge I use for my OPG, they're very nice.)
I previously had Oil Pressure/Oil Temp/Water temp for the last 8 years. The electric oil pressure gauge is complete garbage and I had to replace it three times and the last one started to malfunction within a month and the others lasted about a year.

I never had a problem with oil pressure/temp or level since I've owned the 8 since 2006 however I suffered 2 dead batteries so decided I'd rather keep an eye on the voltage level of the battery instead.

Really the kit was just a face lift for the interior to go along with the aftermarket radio I finally added last month. It took almost no work on my end to replace the gauges and the cost was relatively cheap. It was a quick swap out and even managed to make the wiring a lot neater internally since I'm more capable with a soldering iron now, I laughed at the mess of wires I made 8 years ago.
Old Mar 22, 2015 | 02:35 PM
  #1994  
reni04's Avatar
Registered
 
Joined: May 2014
Posts: 242
Likes: 1
Pulled po2259 code today?.Reached behind the intake wiggled the air pump solenoid(the one on top) and took the hose from the check valve blew through it with ignition off and with ignition on,worked the butterfly valves on the lower intake which seemed nicely free moving and started the 8 up and the CEL light went out?.Also found the hose from the check valve to the air pump solenoid was almost off the tit.Cleaned it off and reinstalled it.

Gonna see if i can get through emissions before and if the light comes back on.If i pass i have another two years to **** with it.The air pump does not effect the performance of the vehiccle but unfortunetly a new law was passed Janiary of 2015 that all cars 8 to 11 years old will now fail emissions in colorado if any cel pops up even if it's non essencial? who new?.
Old Mar 22, 2015 | 03:16 PM
  #1995  
ableobject's Avatar
Registered
 
Joined: Aug 2010
Posts: 287
Likes: 0
From: Altoona, Pa
Getting ready for the season ... put the front coilovers on and lowered it, put on my bazeria's, cleaned up the front by replaced a few missing screws and bolts..sticking with the stock front bumper this season. Im also looking to get a more aggresive front lip. Other than that i have a few adjustments to make to get it sitting right and id like to get the car wrapped a different color but so far so good ...
Attached Thumbnails What did you do with your RX8 today?-forumrunner_20150322_160814.jpg   What did you do with your RX8 today?-forumrunner_20150322_160905.jpg   What did you do with your RX8 today?-forumrunner_20150322_160923.jpg  
Old Mar 22, 2015 | 04:19 PM
  #1996  
jorx7's Avatar
Registered
iTrader: (1)
 
Joined: Aug 2008
Posts: 253
Likes: 13
From: edison
NJ

put my eye lids on wheel spacers and fresh wash from the 1 week had to drive her in the snow!
Attached Thumbnails What did you do with your RX8 today?-img_1412.jpg   What did you do with your RX8 today?-img_1413.jpg   What did you do with your RX8 today?-img_1414.jpg  
Old Mar 22, 2015 | 04:36 PM
  #1997  
ableobject's Avatar
Registered
 
Joined: Aug 2010
Posts: 287
Likes: 0
From: Altoona, Pa
Originally Posted by jorx7
put my eye lids on wheel spacers and fresh wash from the 1 week had to drive her in the snow!
Nice ... spacers really make a difference... now all you gotta do is lower that bad boy.. :p
Old Mar 23, 2015 | 09:49 PM
  #1998  
GTSimmo's Avatar
Registered
 
Joined: Dec 2006
Posts: 83
Likes: 0
Recently the car pulled left then right during heavy braking from highway speed. I haven't been able to duplicate it on long straight empty roads since then but decided to pull the brake pads and check. Pads are Hawk HPS and oem rotors. Nothing out of the ordinary, plenty of pad life and even wear. At the very least gave me a chance to re-grease the contact areas which were in desperate need of it. Brakes a lot quieter now.
Old Mar 24, 2015 | 06:02 AM
  #1999  
BigCajun's Avatar
Banned
iTrader: (1)
 
Joined: Jan 2013
Posts: 0
Likes: 2,703
Are they still pulling?
Possibly the rubber brake lines need to be replaced, be a good time to replace the brake fluid.
Old Mar 24, 2015 | 04:13 PM
  #2000  
keitan's Avatar
Registered
 
Joined: Apr 2014
Posts: 41
Likes: 0
From: Prescott, AZ
Oil light came on yesterday after revving it pretty high (for an automatic). Completely freaked me out. Pulled over fairly immediately (30 seconds later), and pulled out the manual.

It said a "low oil level" event was the likely culprit. It said to keep RPMs low until you can get more in the engine. I checked, and sure enough it was a few millimeters above the low line. So I drove it home and topped it off. Oh, these silly rotaries. Almost gave me a heart attack!

Gonna change the stock air filter next.

Thread Tools
Rate This Thread
Rate This Thread:
You have already rated this thread Rating: Thread Rating: 1 votes, 5.00 average.


All times are GMT -5. The time now is 07:11 AM.