Notices
NE RX-8 Forum Serving ME, NH, VT, MA, RI, CT, NY, NJ, DE, PA, WV, MD, VA, OH

Akron/Cleveland 8 Owners.

Old Apr 19, 2009 | 11:29 PM
  #5501  
Danc's Avatar
Low vaccuum readings
iTrader: (1)
 
Joined: Apr 2007
Posts: 146
Likes: 0
From: Louisville, OH
Originally Posted by Jon316G
I have hawk ceramic pads and they lasted all last year without squeaking, but started doing it a month ago.
I remember not having enough grease to coat the required areas and focused mainly on the shims.
I didn't coat the area the clips rest and this is probably what is squeaking now.
I'll probably take a look at this tomorrow.
This is bad news for me then, /cry

Originally Posted by Simic90
oooh, been a while since I posted heh. Been a bit busy with school and such. Missed out on 16 pages of stuff lol.

Anyways though, I'm at (100% being the deal is finished and good to go) 50% on buying buniques RX-8. Have to get back to the bank tomorrow morning to see if the loan is approved and what not. Wish me luck! xD
Awesome, best of luck!
Reply
Old Apr 20, 2009 | 02:41 AM
  #5502  
Jon316G's Avatar
Grasshopper
iTrader: (1)
 
Joined: Dec 2006
Posts: 6,779
Likes: 50
From: Streetsboro, OH
Originally Posted by Danc
This is bad news for me then, /cry
Why do you say that?
Reply
Old Apr 20, 2009 | 04:08 AM
  #5503  
RK's Avatar
RK
It's Not Easy Being Green
iTrader: (1)
 
Joined: Apr 2008
Posts: 1,846
Likes: 0
From: Akron, OH
One tip for those of you having the squeaky brake problem.

Brake really, really hard a couple times in a row. If you can warm up the brakes and then actually use them the sound usually goes away. I don't use the hunk that comes with hawk pads since I swap them all the time and hard braking seems to be the best cure.
Reply
Old Apr 20, 2009 | 04:15 AM
  #5504  
Jon316G's Avatar
Grasshopper
iTrader: (1)
 
Joined: Dec 2006
Posts: 6,779
Likes: 50
From: Streetsboro, OH
Originally Posted by RK
Brake really, really hard a couple times in a row.
I actually tried that too after performing my AP logs a couple nights ago, still squeaks.
I plan on greasing all the required areas today, so hopefully that will take care of it.
Reply
Old Apr 20, 2009 | 07:30 AM
  #5505  
tiresmoker's Avatar
Trust me, you're wrong
iTrader: (1)
 
Joined: Feb 2008
Posts: 779
Likes: 0
From: Youngstown, Oh
Morning everyone.

Friday I got ambitious and yanked everything off the car for the VFAD except the actuator. I yanked the airbox screens and baffles too, cleaned the MAF and dropped in a new air filter, woot! Didn't notice a change in tone or an increase in performance though.

Either way, at the very least I did some weight reduction. All 10oz of it. Ok, maybe a pound.
Reply
Old Apr 20, 2009 | 07:34 AM
  #5506  
Jon316G's Avatar
Grasshopper
iTrader: (1)
 
Joined: Dec 2006
Posts: 6,779
Likes: 50
From: Streetsboro, OH
Originally Posted by tiresmoker
Friday I got ambitious and yanked everything off the car for the VFAD except the actuator. Didn't notice a change in tone or an increase in performance though
I didn't think you would hear an audible increase with your mid-pipe, though some seem to think so.
Did you verify that the VFAD valve stayed open?
You can reach in through the engine bay and feel it (obviously the air box has to be removed).
Reply
Old Apr 20, 2009 | 07:38 AM
  #5507  
streetsrx8's Avatar
Registered User
 
Joined: Apr 2009
Posts: 137
Likes: 0
From: Streetsboro, OH
Originally Posted by Jon316G
Oh... and I'm sorry you live in Streetshole
No hard feelings, I grew-up and graduated there.
Hah! Its much better then Youngstown, where I went to school (and still drive to daily for work).


I am going to see what the dealer says before replacing any of the pads or rotors. Maybe I can weasel my way into some new brakes, who knows.

Thanks for all of the suggestions.
Reply
Old Apr 20, 2009 | 07:39 AM
  #5508  
Jon316G's Avatar
Grasshopper
iTrader: (1)
 
Joined: Dec 2006
Posts: 6,779
Likes: 50
From: Streetsboro, OH
Originally Posted by streetsrx8
Maybe I can weasel my way into some new brakes, who knows.
Free is always good!
Reply
Old Apr 20, 2009 | 07:40 AM
  #5509  
tiresmoker's Avatar
Trust me, you're wrong
iTrader: (1)
 
Joined: Feb 2008
Posts: 779
Likes: 0
From: Youngstown, Oh
Yep, I stuck my head in the hole created by the missing airbox saw that the flap was open and I could see the backside of my bumper cover through it. hehe.

Then I hooked the hose back up to the actuator and tried to created enough vacuum by sucking on the hose to close the flap, but I failed miserably at that.

I was a little drunk when I was doing this though
Reply
Old Apr 20, 2009 | 07:42 AM
  #5510  
Jon316G's Avatar
Grasshopper
iTrader: (1)
 
Joined: Dec 2006
Posts: 6,779
Likes: 50
From: Streetsboro, OH
Originally Posted by tiresmoker
Then I hooked the hose back up to the actuator and tried to created enough vacuum by sucking on the hose to close the flap, but I failed miserably at that.
I don't think you can create 10psi of vacuum by sucking with your mouth.
Should have given Megan a try at it
Reply
Old Apr 20, 2009 | 07:44 AM
  #5511  
tiresmoker's Avatar
Trust me, you're wrong
iTrader: (1)
 
Joined: Feb 2008
Posts: 779
Likes: 0
From: Youngstown, Oh
Originally Posted by streetsrx8
Hah! Its much better then Youngstown, where I went to school (and still drive to daily for work).
Where abouts in Youngstown do you work?

I hardly ever see any 8's out this way. Every now and again I see a velo red w/aero package out in Columbiana. There's a silver 8 by my old highschool, and a new 09 white one out in Columbiana (but it's an older woman that drives that...)
Reply
Old Apr 20, 2009 | 07:48 AM
  #5512  
tiresmoker's Avatar
Trust me, you're wrong
iTrader: (1)
 
Joined: Feb 2008
Posts: 779
Likes: 0
From: Youngstown, Oh
Originally Posted by Jon316G
I don't think you can create 10psi of vacuum by sucking with your mouth.
Should have given Megan a try at it
Well, having a few beers in me at the time lead me to believe otherwise I have made 4psi of "boost" before on a spare gauge I had laying around.

And I'd comment about Megan, but she's lurking in this thread right now and I like to keep my ***** attached to my body
Reply
Old Apr 20, 2009 | 07:54 AM
  #5513  
DeViLbOi's Avatar
The devil made me do it
iTrader: (1)
 
Joined: Jul 2007
Posts: 3,708
Likes: 2
From: Colorado Springs, CO
Originally Posted by streetsrx8
Hey everyone, new owner here in Streetsboro. Picked up my VR '8 at Cascade Auto last Thursday! 04 with only 16,000 miles. Perhaps the previous owner was a member here?

Unfortunately after putting about 100 miles on it the rear brakes started screeching something fierce, so I'm taking it back to the dealer in hopes they will take care of it for me.

Anyways, I look forward to seeing some of you on the road!

Welcome to the club. Hope to see you on the 24th.
Reply
Old Apr 20, 2009 | 08:12 AM
  #5514  
streetsrx8's Avatar
Registered User
 
Joined: Apr 2009
Posts: 137
Likes: 0
From: Streetsboro, OH
Originally Posted by tiresmoker
Where abouts in Youngstown do you work?

I hardly ever see any 8's out this way. Every now and again I see a velo red w/aero package out in Columbiana. There's a silver 8 by my old highschool, and a new 09 white one out in Columbiana (but it's an older woman that drives that...)

I work pretty much right on the corner of belmont/churchill in liberty. There is a small office building behind the subway/verizon building.
Reply
Old Apr 20, 2009 | 08:48 AM
  #5515  
Shinka_MJR's Avatar
SHKWAV
 
Joined: Jun 2008
Posts: 662
Likes: 2
From: Massillon, Ohio
Streetsboro, eh? GTFO! I graduated from Mogadore in `91 :p

We're having a get together friday at The Boneyard up on Rt 82 @6pm if you can make it.

YES I WILL BE THERE! (with license plate frame and memory card for the respective people)

Car's getting tinted today! woohoo! 20% all around. will try to get pics but with the rain, may not be worth the effort.

For anyone interested, i was going through some of the computer components i have laying around and will be putting them up on ebay. If anyone here is interested, let me know.

2gb of 400MHz Corsair DDR2 ram
2gb of 800MHz Corsair DDR2 ram
1gb 7950GX2 EVGA video card
2.4GHz AMD64 single core processor
Linksys router (not wireless)

havent even thought about prices but probably would be just as happy giving you the stuff if you wanted it. never feel right about selling stuff to friends.
Reply
Old Apr 20, 2009 | 09:03 AM
  #5516  
megz's Avatar
Registered User
 
Joined: Jul 2008
Posts: 145
Likes: 0
From: Cleveland, OH
Originally Posted by tiresmoker
Well, having a few beers in me at the time lead me to believe otherwise I have made 4psi of "boost" before on a spare gauge I had laying around.

And I'd comment about Megan, but she's lurking in this thread right now and I like to keep my ***** attached to my body
Har har lol. I wouldn't hurt your ***** sweetie, promise .. not to the point of having them detached from your body at least lol. In all honesty, it didn't make much of a sound difference, I didn't notice at least
Reply
Old Apr 20, 2009 | 10:43 AM
  #5517  
Danc's Avatar
Low vaccuum readings
iTrader: (1)
 
Joined: Apr 2007
Posts: 146
Likes: 0
From: Louisville, OH
I must be unlucky, I took my screens out and all I got was random stalling.
Reply
Old Apr 20, 2009 | 10:43 AM
  #5518  
Vyndictive's Avatar
"13B vs. Renesis" Discuss
iTrader: (28)
 
Joined: Mar 2008
Posts: 2,399
Likes: 3
From: Canton, OH
Well... my little trip to Arkansas was awful. After finishing up TJ's car and my exhaust at around 11pm on friday I hit the road. 850 miles down in 15 hours (I took a 2 hour nap). Got there... found my flight back was cancelled, so rented a car and drove back last night... another 740 miles.
The purpose of the trip was to drop off a truck to my brother who just got restationed in little rock and he wanted to buy a good used vehicle. 10 minutes after I leave and head east and he heads back to little rock, the truck breaks down. Powerloss, misfires, exhaust codes... basically your fear after you buy a used car. So... a pretty freakin' awful weekend for me. . . I bet I go out to the 8 and it'll be flooded for some reason. . .

John: how was mazdafest?

Banned: I'd love to see the pics of the tint when you get it done - you better be there on friday so I can check it out in person.

Simic - that would be sweet if you bought buniques RX8... i get commission for posting that link though.

streetrx8 - welcome to the club.

I think that is all...
Reply
Old Apr 20, 2009 | 10:51 AM
  #5519  
streetsrx8's Avatar
Registered User
 
Joined: Apr 2009
Posts: 137
Likes: 0
From: Streetsboro, OH
Originally Posted by Shinka_MJR
Streetsboro, eh? GTFO! I graduated from Mogadore in `91 :p
Ive only been in streetsboro for about 8 months. Mostly grew up in Canton (Glen Oak '03!), went to school at YSU, graduated last year and moved to Streetsboro.
Reply
Old Apr 20, 2009 | 11:07 AM
  #5520  
Vyndictive's Avatar
"13B vs. Renesis" Discuss
iTrader: (28)
 
Joined: Mar 2008
Posts: 2,399
Likes: 3
From: Canton, OH
Ha, its like we swapped then... I went high school at Hudson (fancy!) and now I live down in North Canton. I did a few months in the 'Boro though, and a year in a Massillon.
Reply
Old Apr 20, 2009 | 11:24 AM
  #5521  
DeViLbOi's Avatar
The devil made me do it
iTrader: (1)
 
Joined: Jul 2007
Posts: 3,708
Likes: 2
From: Colorado Springs, CO
Mazdafest was great. You should have gone Steve...you would have had a blast.
Reply
Old Apr 20, 2009 | 11:34 AM
  #5522  
Trademark's Avatar
Registered
 
Joined: Jan 2009
Posts: 107
Likes: 0
From: Burton Ohio (Cleveland Area)
Passport 9500i came in the mail. and it kicks ***.... anyone wanna go joyriding? =)
Reply
Old Apr 20, 2009 | 11:39 AM
  #5523  
DeViLbOi's Avatar
The devil made me do it
iTrader: (1)
 
Joined: Jul 2007
Posts: 3,708
Likes: 2
From: Colorado Springs, CO
Joyriding is not something that we do. We are responsible drivers.
Reply
Old Apr 20, 2009 | 11:50 AM
  #5524  
Trademark's Avatar
Registered
 
Joined: Jan 2009
Posts: 107
Likes: 0
From: Burton Ohio (Cleveland Area)
Joyriding does not indicate not obeying traffic laws.... it is simply a drive for no apparent reason.



edit: or are we calling that a cruise these days?
Reply
Old Apr 20, 2009 | 01:03 PM
  #5525  
Shinka_MJR's Avatar
SHKWAV
 
Joined: Jun 2008
Posts: 662
Likes: 2
From: Massillon, Ohio
I ****** joyride bitches! laws? lol, wut?**

I'll be there steve. Hopefully not only with new tint but also new shifterboot, kill switch and a catch can (both of which referencing our local member's DIYs) fully installed... depending on if the stuff gets delivered this week.

looks like the sun is trying to come out. might post pics later if possible.







** i don't condemn or condone how anyone drives, where they drive, what they drive, who they drive. i'm gonna smile when i hear you're having fun doing your thing. I'm not the one to judge you. I've either done it as well or am planning / hoping to in the future. If it's something i hadn't thought of before, believe me, i'll try it after hearing about it.
Reply

Thread Tools
Rate This Thread
Rate This Thread:
You have already rated this thread Rating: Thread Rating: 0 votes,  average.


All times are GMT -5. The time now is 06:18 AM.