(CLOSED) CZ Stage 1/2 GB #2
#301
Just throwing this out, but I'll volunteer to wait and let the rest of the group get their unit shipped from Brian from the batch he already has. I guess another 14 people need to do the same for it to work though. Wha'd'ya say, guys?
#302
Riot Controller
Thread Starter
Join Date: Jan 2004
Location: Orlando, FL
Posts: 2,142
Likes: 0
Received 0 Likes
on
0 Posts
Sorry I haven't gotten any emails out to you guys, my computer with all that data is down at the moment. It's backed up, but I can't install Access on this Win98 POS im using temporarily, so I gotta go to work to do it.
I called Maurice today and again was told he'd call me back but never did. 2 weeks ago approx. 15 units were going to be shipped to me right about now, obviously that hasn't happened or he'd be happy to tell me about it. So it's up in the air at the moment...
But I'll keep trying!
I called Maurice today and again was told he'd call me back but never did. 2 weeks ago approx. 15 units were going to be shipped to me right about now, obviously that hasn't happened or he'd be happy to tell me about it. So it's up in the air at the moment...
But I'll keep trying!
#303
Registered
Join Date: Sep 2003
Location: Diamond Bar, Ca
Posts: 1,473
Likes: 0
Received 0 Likes
on
0 Posts
what a joke that guy is... I hope that another company comes out with something similar so we dont have to deal with him if we choose... seems like he has us where he wants and knows nobody else supplies something similar...
#304
Registered User
iTrader: (1)
Join Date: Dec 2003
Location: Nebraska
Posts: 310
Likes: 0
Received 0 Likes
on
0 Posts
FYI, sounds like Canzoomer is going on vacation to Europe this month and RX-8friend also is in the middle of a couple of week's vacation.
I'm not sure of dates or exact timeframes, but this thread (with the word vacation highlighted in red) is what I am basing this information from.
https://www.rx8club.com/showthread.p...n&pagenumber=2
Also, RX-8 friend makes another reference to being out of town on page 3.
I'm not sure of dates or exact timeframes, but this thread (with the word vacation highlighted in red) is what I am basing this information from.
https://www.rx8club.com/showthread.p...n&pagenumber=2
Also, RX-8 friend makes another reference to being out of town on page 3.
#306
Registered User
Join Date: Feb 2004
Location: Atlanta, GA
Posts: 62
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by Hskr8
FYI, sounds like Canzoomer is going on vacation to Europe this month and RX-8friend also is in the middle of a couple of week's vacation.
FYI, sounds like Canzoomer is going on vacation to Europe this month and RX-8friend also is in the middle of a couple of week's vacation.
https://www.rx8club.com/showthread.p...0&pagenumber=2
It said his email address was:
lyfk@hotmail.com
#307
Thews8
soo who has needed there box serviced? and how long did that take?
i ask because it might be a problemb later on if they take this long on the service end. ?
anyone have info on this ?
i ask because it might be a problemb later on if they take this long on the service end. ?
anyone have info on this ?
#308
FWIW, Maurice told me today that he doesn't expect to be caught up on Stage 1 orders for another 3-4 weeks since there's only one person doing assembly while Dave's gone. I don't know what that means for us, if anything... grain of salt and all.
On a brighter note, the new CanScans should ship next week directly from Dan Harrison (in TX, so no customs issues for most of us.) I have a bit more confidence in this projection, personally.
On a brighter note, the new CanScans should ship next week directly from Dan Harrison (in TX, so no customs issues for most of us.) I have a bit more confidence in this projection, personally.
#309
Originally posted by thew
soo who has needed there box serviced? and how long did that take?
i ask because it might be a problemb later on if they take this long on the service end. ?
anyone have info on this ?
soo who has needed there box serviced? and how long did that take?
i ask because it might be a problemb later on if they take this long on the service end. ?
anyone have info on this ?
#310
Soccer Fan
Join Date: Jun 2003
Location: Oklahoma City
Posts: 339
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Rosco
FWIW, Maurice told me today that he doesn't expect to be caught up on Stage 1 orders for another 3-4 weeks since there's only one person doing assembly while Dave's gone. I don't know what that means for us, if anything... grain of salt and all.
On a brighter note, the new CanScans should ship next week directly from Dan Harrison (in TX, so no customs issues for most of us.) I have a bit more confidence in this projection, personally.
On a brighter note, the new CanScans should ship next week directly from Dan Harrison (in TX, so no customs issues for most of us.) I have a bit more confidence in this projection, personally.
#313
Soccer Fan
Join Date: Jun 2003
Location: Oklahoma City
Posts: 339
Likes: 0
Received 0 Likes
on
0 Posts
I bet if he didnt already have our money they would have been done a long time ago. There is no way it should take 3-4-5 months to recieve a product after payment. I know he is busy, but he should have them built before he takes orders and not build as he goes. I think he should not take any more orders and get finish the orders he has. I also know that he is working on the piggyback for Sunflower's SC. I stopped by Sunflower yesterday and talked to Larry Smith about it. If the final dyno numbers turn out as good as Larry predicts then Im going to get it and I wont even need this Stage 1.1. The kit that Larry is going to offer will include a piggyback from Maurice.
#316
Registered
Join Date: Oct 2001
Location: Boulder County, Colorado
Posts: 7,966
Likes: 0
Received 4 Likes
on
3 Posts
Originally Posted by Jump120MPH
I bet if he didnt already have our money they would have been done a long time ago. There is no way it should take 3-4-5 months to recieve a product after payment. I know he is busy, but he should have them built before he takes orders and not build as he goes. I think he should not take any more orders and get finish the orders he has. I also know that he is working on the piggyback for Sunflower's SC. I stopped by Sunflower yesterday and talked to Larry Smith about it. If the final dyno numbers turn out as good as Larry predicts then Im going to get it and I wont even need this Stage 1.1. The kit that Larry is going to offer will include a piggyback from Maurice.
#317
Soccer Fan
Join Date: Jun 2003
Location: Oklahoma City
Posts: 339
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Omicron
I believe the CanZoomer unit is the same thing that Sunflower/CanZoomer are using as the A/F control for their supercharger kit. If so, and you've already bought a CZ unit, then all you'll need is the supercharger map for it. Just FYI.
Last edited by Jump120MPH; 07-10-2004 at 06:27 PM.
#318
Registered
Join Date: Oct 2001
Location: Boulder County, Colorado
Posts: 7,966
Likes: 0
Received 4 Likes
on
3 Posts
But what about those of us who don't want the exhaust? Hmmm, looks like I need to call Larry on Monday.
Originally Posted by Jump120MPH
I was up there at Sunflower on Friday and talked to Larry Smith. He told me that I would have to get rid of mine cause it was going to be different. They arent using the one they had. Larry sent Maurice a Procharger kit to use on his car to develop a piggyback. If it is going to be the same thats a plus. Larry said that the SC kit was going to come with a piggyback and an exhaust.
#322
Registered User
Join Date: Feb 2004
Location: Atlanta, GA
Posts: 62
Likes: 0
Received 0 Likes
on
0 Posts
Any news since a week ago.
Originally Posted by epitrochoid
I called Maurice today and again was told he'd call me back but never did. 2 weeks ago approx. 15 units were going to be shipped to me right about now, obviously that hasn't happened or he'd be happy to tell me about it. So it's up in the air at the moment...
But I'll keep trying!
But I'll keep trying!
#323
I called Michelle today about a separate order I have and asked about the GB while I had her on the phone. She said 1-2 weeks out still. I'm supposed to get a call from Maurice this afternoon, so if that happens, I'll hit him for an update too.
I don't mean to step on your toes, Brian, but I figure the squeaky wheel gets the grease. Hope you don't mind.
I don't mean to step on your toes, Brian, but I figure the squeaky wheel gets the grease. Hope you don't mind.