Malaysia RX8 Database
#5327
RE雨&
Join Date: Jun 2006
Location: Kuala Lumpur, Malaysia
Posts: 316
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by woodtcb
www.autoexe.co.jp new body kit se-03 chun
Cool Nice looking kit. Can't wait until it's completed
#5328
#5332
guys, i have a few questions.. hope you guys can help me?
1) does anyone here uses royal purple fully syn motor oils for their 8? coz i remember seeing an advert on some magazine that autochild or something sells RP oils here in malaysia. i know they're widely used in US but what about here in malaysia with hot temps?
2) does anyone here premix 2T oils with their fuel?
thanks for now!!
1) does anyone here uses royal purple fully syn motor oils for their 8? coz i remember seeing an advert on some magazine that autochild or something sells RP oils here in malaysia. i know they're widely used in US but what about here in malaysia with hot temps?
2) does anyone here premix 2T oils with their fuel?
thanks for now!!
Last edited by tolorati; 01-09-2007 at 03:28 AM.
#5333
Hello to all Sifu
Read through the posts in this thread and found a few maintenance items that i should do when i get my car next week. I'm leaving out the mods for the time being. Need your advice on the items so that there will be no problems with the car in the near future and especially during CNY. Thanks in advance.
Must do!
1) Car alarm system (Clifford?)
2) Check engine oil and change to rotary oil (at Wangan???)
3) Engine mounting cos the car is vibrating a lot during idling after temperature become stable (Wangan have stock???)
4)....
Maybe later items....
1) Turbo timer (Need advice on this)
2) Oil cooler (Need advice on this as well)
3).....
Best regards
Read through the posts in this thread and found a few maintenance items that i should do when i get my car next week. I'm leaving out the mods for the time being. Need your advice on the items so that there will be no problems with the car in the near future and especially during CNY. Thanks in advance.
Must do!
1) Car alarm system (Clifford?)
2) Check engine oil and change to rotary oil (at Wangan???)
3) Engine mounting cos the car is vibrating a lot during idling after temperature become stable (Wangan have stock???)
4)....
Maybe later items....
1) Turbo timer (Need advice on this)
2) Oil cooler (Need advice on this as well)
3).....
Best regards
#5334
Originally Posted by 8ken8
Hello to all Sifu
Read through the posts in this thread and found a few maintenance items that i should do when i get my car next week. I'm leaving out the mods for the time being. Need your advice on the items so that there will be no problems with the car in the near future and especially during CNY. Thanks in advance.
Must do!
1) Car alarm system (Clifford?)
2) Check engine oil and change to rotary oil (at Wangan???)
3) Engine mounting cos the car is vibrating a lot during idling after temperature become stable (Wangan have stock???)
4)....
Maybe later items....
1) Turbo timer (Need advice on this)
2) Oil cooler (Need advice on this as well)
3).....
Best regards
Read through the posts in this thread and found a few maintenance items that i should do when i get my car next week. I'm leaving out the mods for the time being. Need your advice on the items so that there will be no problems with the car in the near future and especially during CNY. Thanks in advance.
Must do!
1) Car alarm system (Clifford?)
2) Check engine oil and change to rotary oil (at Wangan???)
3) Engine mounting cos the car is vibrating a lot during idling after temperature become stable (Wangan have stock???)
4)....
Maybe later items....
1) Turbo timer (Need advice on this)
2) Oil cooler (Need advice on this as well)
3).....
Best regards
advice:
1. yes rotary oil in wangan is a good choice, so does Q8 semi synthetic.
2. need turbo timer for what? our car will automatically turn on the fan when car is hot.
3. Oil cooler is definitely a good mod to have! thumbs up!
#5335
Registered User
Join Date: Sep 2005
Location: PJ, MY
Posts: 819
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by tolorati
guys, i have a few questions.. hope you guys can help me?
1) does anyone here uses royal purple fully syn motor oils for their 8? coz i remember seeing an advert on some magazine that autochild or something sells RP oils. i know they're widely used in US but what about here in malaysia with hot temps?
2) does anyone here premix 2T oils with their fuel?
thanks for now!!
1) does anyone here uses royal purple fully syn motor oils for their 8? coz i remember seeing an advert on some magazine that autochild or something sells RP oils. i know they're widely used in US but what about here in malaysia with hot temps?
2) does anyone here premix 2T oils with their fuel?
thanks for now!!
1. There's mix responses on the choice of engine oil, though most go down the rotary oil route, but haven't heard anyone using RP. You could probably get some in Singapore, if it's not available here.
2. I've read that some 7s do premix 2T, you can try and search here http://www.zerotohundred.com/newforu...splay.php?f=90 (if you didn't already know)
#5336
Registered User
Join Date: Sep 2005
Location: PJ, MY
Posts: 819
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 8ken8
Hello to all Sifu
Read through the posts in this thread and found a few maintenance items that i should do when i get my car next week. I'm leaving out the mods for the time being. Need your advice on the items so that there will be no problems with the car in the near future and especially during CNY. Thanks in advance.
Must do!
1) Car alarm system (Clifford?)
2) Check engine oil and change to rotary oil (at Wangan???)
3) Engine mounting cos the car is vibrating a lot during idling after temperature become stable (Wangan have stock???)
4)....
Maybe later items....
1) Turbo timer (Need advice on this)
2) Oil cooler (Need advice on this as well)
3).....
Best regards
Read through the posts in this thread and found a few maintenance items that i should do when i get my car next week. I'm leaving out the mods for the time being. Need your advice on the items so that there will be no problems with the car in the near future and especially during CNY. Thanks in advance.
Must do!
1) Car alarm system (Clifford?)
2) Check engine oil and change to rotary oil (at Wangan???)
3) Engine mounting cos the car is vibrating a lot during idling after temperature become stable (Wangan have stock???)
4)....
Maybe later items....
1) Turbo timer (Need advice on this)
2) Oil cooler (Need advice on this as well)
3).....
Best regards
2) Check engine oil and change to rotary oil (at Wangan???) - rotary oil is generally recommended, along with mineral oil, you can't go wrong
3) Engine mounting cos the car is vibrating a lot during idling after temperature become stable (Wangan have stock???) - only if your car vibrates, and you can check with wangan for availability
Maybe later items....
1) Turbo timer (Need advice on this) - I don't see the need
2) Oil cooler (Need advice on this as well) - only if you plan to track
#5337
Must do!
1) Car alarm system (Clifford?)
-any type preferably 2 way, better keep it to urself about the brand
2) Check engine oil and change to rotary oil (at Wangan???)
-every1 got their own bible about which oil, but thin oil is better than thick, and anywhere also can buy as long as they sell the oil ur looking for
Maybe later items....
1) Turbo timer (Need advice on this)
turbo spec?
2) Oil cooler (Need advice on this as well)
as some1 mention above only if u go racing with ur car alot, otherwise wasting time and money.
1) Car alarm system (Clifford?)
-any type preferably 2 way, better keep it to urself about the brand
2) Check engine oil and change to rotary oil (at Wangan???)
-every1 got their own bible about which oil, but thin oil is better than thick, and anywhere also can buy as long as they sell the oil ur looking for
Maybe later items....
1) Turbo timer (Need advice on this)
turbo spec?
2) Oil cooler (Need advice on this as well)
as some1 mention above only if u go racing with ur car alot, otherwise wasting time and money.
#5341
hi, welcome..
so what did u get? common man dont just stop there...details details... color? spec? additional stuff? etc?
theboy,
i got knn, i got impatient, couldnt wait for the ms filter from japanparts.com. but seriously... the cat removal was more bang for buck.
so what did u get? common man dont just stop there...details details... color? spec? additional stuff? etc?
theboy,
i got knn, i got impatient, couldnt wait for the ms filter from japanparts.com. but seriously... the cat removal was more bang for buck.
Last edited by WarmFreedom; 01-09-2007 at 11:37 AM.
#5342
rotary user
Thread Starter
Join Date: Apr 2005
Location: malaysia
Posts: 183
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 8ken8
Hello to all Sifu
Read through the posts in this thread and found a few maintenance items that i should do when i get my car next week. I'm leaving out the mods for the time being. Need your advice on the items so that there will be no problems with the car in the near future and especially during CNY. Thanks in advance.
Must do!
1) Car alarm system (Clifford?)
2) Check engine oil and change to rotary oil (at Wangan???)
3) Engine mounting cos the car is vibrating a lot during idling after temperature become stable (Wangan have stock???)
4)....
Maybe later items....
1) Turbo timer (Need advice on this)
2) Oil cooler (Need advice on this as well)
3).....
Best regards
Read through the posts in this thread and found a few maintenance items that i should do when i get my car next week. I'm leaving out the mods for the time being. Need your advice on the items so that there will be no problems with the car in the near future and especially during CNY. Thanks in advance.
Must do!
1) Car alarm system (Clifford?)
2) Check engine oil and change to rotary oil (at Wangan???)
3) Engine mounting cos the car is vibrating a lot during idling after temperature become stable (Wangan have stock???)
4)....
Maybe later items....
1) Turbo timer (Need advice on this)
2) Oil cooler (Need advice on this as well)
3).....
Best regards
#5343
Rotorhead
Join Date: Dec 2004
Location: Penang, Malaysia
Posts: 495
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by davidykhor
shall i introduce myself?
just booked myself a 2003 mazda rx8, waiting for number plate now
David @ 012-2038010
just booked myself a 2003 mazda rx8, waiting for number plate now
David @ 012-2038010
#5344
Rotorhead
Join Date: Dec 2004
Location: Penang, Malaysia
Posts: 495
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by theshortshortman
Could you give me your hp number and real name so that i can sms to you our meet ups and events. Where do you live?
coz u long long then only come online once :P
#5345
Originally Posted by WarmFreedom
hi, welcome..
so what did u get? common man dont just stop there...details details... color? spec? additional stuff? etc?
theboy,
i got knn, i got impatient, couldnt wait for the ms filter from japanparts.com. but seriously... the cat removal was more bang for buck.
so what did u get? common man dont just stop there...details details... color? spec? additional stuff? etc?
theboy,
i got knn, i got impatient, couldnt wait for the ms filter from japanparts.com. but seriously... the cat removal was more bang for buck.
oh simple
a plane jane what also don't have manual transmission rx8 red color.
stuff sitting in my office ready for assembly
ings kit
19" 245/35 front 275/30 rear :P (rim brand i don't want to say hahaha but is a japanese rim"
greddy tc kit
rb lowering kit
rb stabalizer bars
autoexe exhaust
:P
#5346
Registered User
Join Date: Sep 2005
Location: PJ, MY
Posts: 819
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by davidykhor
u mean me ?
oh simple
a plane jane what also don't have manual transmission rx8 red color.
stuff sitting in my office ready for assembly
ings kit
19" 245/35 front 275/30 rear :P (rim brand i don't want to say hahaha but is a japanese rim"
greddy tc kit
rb lowering kit
rb stabalizer bars
autoexe exhaust
:P
oh simple
a plane jane what also don't have manual transmission rx8 red color.
stuff sitting in my office ready for assembly
ings kit
19" 245/35 front 275/30 rear :P (rim brand i don't want to say hahaha but is a japanese rim"
greddy tc kit
rb lowering kit
rb stabalizer bars
autoexe exhaust
:P
That's an impressive list of mods waiting to be installed man. Looks like we'll have two TC VR 8s. *rubbing hands at the prospect of seeing identical cars going head to head*
#5347
Welcome David! look like you really know what u want! Hahahha
nice choice of mods.
Warm, I want to remove mine too, and will make a silencer with the straight pipe. but it will be outside the pipe not inside. But like lennon say, it might go lean for auto! Sad! cause auto only have 2 intake manifold. so we get less air in.
nice choice of mods.
Warm, I want to remove mine too, and will make a silencer with the straight pipe. but it will be outside the pipe not inside. But like lennon say, it might go lean for auto! Sad! cause auto only have 2 intake manifold. so we get less air in.
#5348
office ?
somewhere nearby klcc :P
attached the front bumper "primered" and ready to spray haha once i get the car.
about the turbo kit, Actually i haven't bought it yet, I am still considering, mutiara motors quoted RM12,800.00 . Turbo will be the last thing i am going to put on the vehicle. Anyway every other part is here, including fujisubo exhaust parts
add i mean fujisubo extrator), jaafar ordered it for me, i think its fujisubo, actually not so sure, he said he will get me something nice and i trust him.
instead of greddy turbo kit i may go for the SFR kit that gives double the hp of what greddy gives. the only worry is the harm it may do to the engine, no idea whether the apex seals will hold or not. Also waiting for tyres. pirelli p-zero rosso is out of stock at the moment for those sizes .
somewhere nearby klcc :P
attached the front bumper "primered" and ready to spray haha once i get the car.
about the turbo kit, Actually i haven't bought it yet, I am still considering, mutiara motors quoted RM12,800.00 . Turbo will be the last thing i am going to put on the vehicle. Anyway every other part is here, including fujisubo exhaust parts
add i mean fujisubo extrator), jaafar ordered it for me, i think its fujisubo, actually not so sure, he said he will get me something nice and i trust him.
instead of greddy turbo kit i may go for the SFR kit that gives double the hp of what greddy gives. the only worry is the harm it may do to the engine, no idea whether the apex seals will hold or not. Also waiting for tyres. pirelli p-zero rosso is out of stock at the moment for those sizes .
#5349
Originally Posted by jaii13
Where's your office? Appreciate it if you could tell me where, and don't lock the door..
That's an impressive list of mods waiting to be installed man. Looks like we'll have two TC VR 8s. *rubbing hands at the prospect of seeing identical cars going head to head*
That's an impressive list of mods waiting to be installed man. Looks like we'll have two TC VR 8s. *rubbing hands at the prospect of seeing identical cars going head to head*
#5350
Registered User
Join Date: Sep 2005
Location: PJ, MY
Posts: 819
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by davidykhor
c'mon man, instead of just showing who is the fastest, why not just enjoy looking at each other vehicle better right