RXeckless

iTrader: (5)

UPDATE: Got the cling material today and decided to go with Silk Screening on Monday, can't wait forever for the GTO press. First run is 50 piece should have by the end of next week with no glitches as Silk Screen guy tells me no problem printing on this material, as always I'm skeptical.

RXeckless

iTrader: (5)

Picked-up the clings from the printer today, look good I'll try and take pic's tomorrow and get some number together but looking around $10 plus postage(for snail mail) if I get 10 or less. 7-8 if I get 20, and so on.

I'm already into this project over two hundred with the stickers & clings, but that's my problem.
I'll put all the detail in tomorrow's post
Thanks again for all your input!

RXeckless

iTrader: (5)

Here's the pic's I promised. This is what's in the package, One (1) Weatherproof Polyester Circle Labels with 3.313" Circles - 6 labels per sheet with 1 each of both designs in black, red and blue or yellow or grey. These sticker are NOT for your car, I made these for helmets, toolboxes etc. etc. if you put these on your car, well good luck get them off!

One (1) sheet on Cling material with both designs in white 4.7244 circles. These clings go on the inside of the window of your choice but were designed more for the rear passenger windows (see pic's).

Application: Be sure hands are clean and free of grease or wear gloves. Clean the inside interior of window and allow to dry complete, peel from the sheet and place in the desired location on the inside of the window (not outside!!!!). With a really soft cloth smooth out the decal from center to the edge to remove air and moisture (not to scratch the printed decal) and your done. The cling is removable and reusable. As the cling is held in place with static it's a good idea to keep the backer paper as a safe repository if you remove the cling for storage or window cleaning.
For more instructions and care advice try
http://webdecal.com/prodopt-sc.shtml

P.S. Remember try to work as clean as possible as dust is attracted to the material i.e. static cling

So, if your interested please sign up.


1. Chad D.
2.
3.
4.
5.
6.
7.
8.
9.
10.

The more the cheaper for everyone, looking around $10 plus postage(for snail mail) if I get 10 or less. $8 if I get 20, $6-7 if I get 30 and so on.
If i sell all 50 I'll mail all a loonie or toonie, I'm not in it for the money just RX-8 Canada Club spirit.

Thanks again

Re: Pic are to show on the vehicle but are as sharp as the previously posted images!

Chad D.

iTrader: (19)

Sign me up.

HomicidalApple

iTrader: (3)

Im not in canada but ill still throw my 2 cents in, you should do something with the canadian leaf and a basic RX-8 reference. Maybe something like a rotor inside the canadian leaf with "RX-8 Club" below it??

HomicidalApple

iTrader: (3)

i should have gone to the last page before posting lol.

Well i like the new design! it looks really good!

Chad D.

iTrader: (19)

The clings look very good

DarkBrew

I'm in

1. Chad D.
2. Darkbrew
3.
4.
5.
6.
7.
8.
9.
10.

RXeckless

iTrader: (5)

Thanks for the bump Warren, but I started a new thread in the Canada for Sale/Wanted will contact soon. I thought the new thread would help spur some interest.
https://www.rx8club.com/showthread.p...11#post3537711