Is it needed? Why's it needed?what's it do

What wud appen if I didn't use it

 

What kit do you have? I have Esmeril and I use boost logic turbo blanket. It will help with reducing temp under the hood by a lot. It cool enough that you can rest your hand on the blanket after a drive. Just make sure you let the car cool down before you shut it off because the blanket hold heat and it takes longer for turbo to cool down.

Other than that wrap hoses in the area with heat insulating tapes as much as you can.

 

manifold blanking plate? wut?

 

I think he is talking about a manifold BLOCKING plate, I wouldn't use it.

 

Blocking what...intake manifold? Like on the Greddy Kit....that blocks the Auxillary Intake tract at the manifold??

 

yes but is it neccessary whats the point in blocking it

 

https://www.rx8club.com/series-i-major-horsepower-upgrades-93/greddy-turbo-owners-make-sure-you-fit-your-blocking-plate-164382/

have a read of this . It is Greddy's way of making their turbo work with our motor .
Beneficial for the stock Greddy IMO

 

still beneficial with a upgraded greddy?

 

i think it depends on what your are tuning it with.

beers

 

no.

car ran like poop with the blocking plate plus fluid's upgraded turbo.

 

not if you completely block the port - no

 

like ya,

not stock turbo, and not greedy tuning..

duh!

beers

 

Brettus - weren't you the guy who started the 'must use the plate' thread?

So do I take it back out?

 

funny. i though i recalled that. but did not point it out, as i think i am going to be asking bret questions soon!

beers

 

I know dick about turbos (as has been demonstrated here, at length) and only (made and) put the damn thing in because Bret said it was important.....

 

keep it on for the stock greddy stealth

 

keep it in for stock Greddy but take it out for anything else .

OR - tune it like i did