Break-in with 5psi
|
are you running race gas or e85?
seems a little lean to me... scary lean |
Zoom zoom boom.
|
Originally Posted by yomomspimp06
(Post 4769745)
are you running race gas or e85?
seems a little lean to me... scary lean when you accelerate aggressively all mazda lean before touch the perfec mix. Mi car run 11.7. |
how much boost are you planning to run?
|
[QUItOTE=yomomspimp06;4769829]how much boost are you planning to run?[/QUOTE]
Break-in 5psi. Low boost 10 high It is not known yet. When touch 400hp. |
Originally Posted by gamaliel31
(Post 4769790)
No lean. 93pump gas.
when you accelerate aggressively all mazda lean before touch the perfec mix. Mi car run 11.7. Mine dives to where i want it to be ...pretty much instantly.... |
Originally Posted by Brettus
(Post 4769838)
Mine dives to where i want it to be ...pretty much instantly....
|
Originally Posted by brettus
(Post 4769838)
mine dives to where i want it to be ...pretty much instantly....
Originally Posted by 9krpmrx8
(Post 4769844)
same here.
|
but need more details and better mix. It not yet installed the methanol kit.
|
|
I hope spoolup is gunna be better than that once you wind up the boost ....
|
9 Attachment(s)
Attachment 2182045B95AF1A7.jpg.html]Attachment 218205[/URL]
Attachment 218206 Attachment 218207 Attachment 218208 Attachment 218209 Attachment 218210 Attachment 218211 Attachment 218212 Home made powder coating parts Clean engine. |
what gun are you using? As a home powder coater myself, I cringe at the orange peel I'm seeing in your black pieces. I still get them from time to time. Over all, good job though. Keep it up. How did you mask it off?
|
So I watched one of your videos... can't help but notice water coming out of the overflow hose :uhh:
EDIT - holy cow that car looks insane! How did you get the headlights to look like that? :eek: |
Originally Posted by yomomspimp06
are you running race gas or e85?
seems a little lean to me... scary lean Just a noob tryin to learn :lol: |
Originally Posted by Nisaja
(Post 4770285)
Is it because his car's AFR hit 15.5 on liftoff? I don't get it. My car is stock and it hits 15 on liftoff too. And even when flooring it stays around 14.5. Doesn't drop down to say 11-12.
Just a noob tryin to learn :lol: |
3 Attachment(s)
Originally Posted by yomomspimp06
(Post 4770280)
what gun are you using? As a home powder coater myself, I cringe at the orange peel I'm seeing in your black pieces. I still get them from time to time. Over all, good job though. Keep it up. How did you mask it off?
All from ebay cheap gun. Tutorial like this👇🏽👇🏽 |
Originally Posted by Nisaja
(Post 4770285)
Is it because his car's AFR hit 15.5 on liftoff? I don't get it. My car is stock and it hits 15 on liftoff too. And even when flooring it stays around 14.5. Doesn't drop down to say 11-12.
Just a noob tryin to learn :lol: |
Originally Posted by Nisaja
(Post 4770283)
So I watched one of your videos... can't help but notice water coming out of the overflow hose :uhh:
EDIT - holy cow that car looks insane! How did you get the headlights to look like that? :eek: Wet sand paper 800, 1000, 1500 and 2000 inside and outside. Polish inside and out side. Urethane Clear coat inside and outside. |
Originally Posted by yomomspimp06
(Post 4770291)
I watched the video multiple times and it seems as if the boost rolled on and AFR was in the 13's. the 2nd video looks a lot better. car is still running and OP is enjoying so it's whatever. I'm just looking forward to more vids and boosted 8's
|
Originally Posted by yomomspimp06
(Post 4770280)
what gun are you using? As a home powder coater myself, I cringe at the orange peel I'm seeing in your black pieces. I still get them from time to time. Over all, good job though. Keep it up. How did you mask it off?
|
I'll look through my phone to see if I have any pictures. :( broke my bigger oven around Dec. of last year so I haven't done much of anything since. Been too lazy to fix it. I mainly did ATV parts and such. whatever my friends brought to me to coat. Since I live in the country that means, 4wheeler and Razor parts lol
|
3 Attachment(s)
|
Lindo papa!!
|
All times are GMT -5. The time now is 10:02 AM. |
© 2024 MH Sub I, LLC dba Internet Brands