rotary sound
#1
Registered
Thread Starter
Join Date: Apr 2010
Location: montreal
Posts: 38
Likes: 0
Received 0 Likes
on
0 Posts
rotary sound
i everyone...am new in the world of rotary...i buy r3 2010...i went to put catless mid pipe and rx7 store cat back....and the soud is very special..like civic 92 whit a hole in muffler...i have a lot of rattle at different rpm...it is normal or not?? i dont have resonator it is my probleme??..any info is very appreciate..and excuse my poor english...thank in advance..
Last edited by no-piston; 09-03-2010 at 11:19 PM.
#3
Vtak just kicked in yo!!
iTrader: (1)
Join Date: Jun 2007
Location: Lake County IL
Posts: 4,053
Likes: 0
Received 0 Likes
on
0 Posts
yup, mine sounds raspy with the midpipe. I wouldnt compare it to a civic however, it doesnt rasp that bad. From a couple miles away, my car sounds like a street bike that's revving very slow lmao
#4
Registered
Thread Starter
Join Date: Apr 2010
Location: montreal
Posts: 38
Likes: 0
Received 0 Likes
on
0 Posts
ok...am not crazy..lol.....low rpm is good it is juste near 3000 -4500 rpm the (grinchhhhhh) come.. and at high rev sound like a superbike.....do you think whit a beter mid pipe or whit a resonator i fix the probleme....my plan it is to put a turbo kit...do you think whit a turbo, the qualitie of sound is beter...thank for your help........
#7
He's as bad as Can
#9
Recreational User
iTrader: (1)
Join Date: Feb 2010
Location: Austin, TX
Posts: 363
Likes: 0
Received 0 Likes
on
0 Posts
+1 for more resonators!
Adding a turbo would quiet it down even more. You could have a shop cut and weld in resonators for you but have them give a quote first. It might be more effective to buy the Racing Beat or BHR that has them all ready. Good luck.
HEY! I drove a CIVIC once! Annnd nooooo it wasn't too raspy..... Greddy Evo'ed it right
Adding a turbo would quiet it down even more. You could have a shop cut and weld in resonators for you but have them give a quote first. It might be more effective to buy the Racing Beat or BHR that has them all ready. Good luck.
HEY! I drove a CIVIC once! Annnd nooooo it wasn't too raspy..... Greddy Evo'ed it right
#10
Registered
Thread Starter
Join Date: Apr 2010
Location: montreal
Posts: 38
Likes: 0
Received 0 Likes
on
0 Posts
..juste for test i try to put 3 inch stainless steel flexibe..to reduce de vibration before to put resonator...am not fanatic of catalize and resonator....i reply went it make....anybody try flexibe to reduse vibration?
Thread
Thread Starter
Forum
Replies
Last Post
nowakm99
Series II Technical and Trouble shooting
1
10-09-2015 07:10 AM
nivong
Europe For Sale/Wanted
0
09-02-2015 07:54 AM