dtorre

Ok i'm looking at purchasing a set of Axis Hiros in a staggered setup ((gunmetal)) for my Winning Blue 8, with the sizes listed below, from a fellow 8'er .

Sizes:
front 19x8.5 45mm 235/35/19, hancook k104's
rear 19x9.5 55mm 275/30/19, hancook k104's

Well my car has been lowered with Tein S Tech Springs and Koni shocks and I was wondering if there would be any clearance or rubbing problems with these wheels.

Posting here late at night so figured a random 8'er could answer this question before the person selling me these wheels, or atleast before I go to bed

Fanman

I have almost the exact same setup. Same on the front, but can't see how he cleared the caliper. I was at +38 mm, and had to get a spacer as I (barely rubbed the caliper). On the back you might rub given your drop, but the offset is so deep, I don't think you will. But again I can't see how you have such deep offsets with such a wide tire.

adrian-1

Fronts clear the calipers due to the hiro's spoke design compared to your st2's. They have more bend allowing caliper to clear.
The rears don't rub with my MS springs/shocks. Still have room for more drop.