Will It Fit Thread
#9726
Not worried about the rears I already rolled them and shaved the bumper tab off as my current staggered set up is 275/35/19 19x10 et38 in the rears, its the front im worried about. But yeah Guess ill stick with 245/40's thanks dude.
#9729
Help for a Newbie?
So I brought a set of rims from a local guy for less than $300 ..he wanted to get rid of them quick ..the rims are Enkei Klamp here are the specsWHEEL DIAMETER: 17 in.
WHEEL WIDTH: 7 in.
COLOR: Black
OFFSET: 38 mm
BOLT PATTERN: 5x100 mm
BOLT PATTERN 2: 5x114.3 mm
FINISH: Matte
WHEEL SIZE: 17x7
MARKETING COLOR: Black/Red
BORE DIAMETER: 72.6 mm
Now I was wondering if this fit on stock rx8 and what size of tires would I need for this set of rims ?
Any advice?
WHEEL WIDTH: 7 in.
COLOR: Black
OFFSET: 38 mm
BOLT PATTERN: 5x100 mm
BOLT PATTERN 2: 5x114.3 mm
FINISH: Matte
WHEEL SIZE: 17x7
MARKETING COLOR: Black/Red
BORE DIAMETER: 72.6 mm
Now I was wondering if this fit on stock rx8 and what size of tires would I need for this set of rims ?
Any advice?
#9731
Registered
I want to get 17 inch rims for the rear on my RX-8 (my daily driver), because I'm going to be drifting (at a track, not illegally). I'm doing this for cheaper tires and not looks, I'm going to cruise on factory rims (all 4) in between practices. What guidelines (specs) do I need to know in order to purchase rims that fit? I know lug pattern is 5x114.3mm, but what offset do the rims have to be, and how do I know if they will clear the brakes and other equipment? Also would it be okay to drift with wider rims (stock) in the front and have narrower rims in the rear? If you guys have any recommendations or suggestions about anything like cheap rims, cheap and common tire sizes, offset differences, and width of rims on front vs rear for drifting, please let me know. Any help is appreciated, thanks!
#9732
SARX Legend
iTrader: (46)
So I brought a set of rims from a local guy for less than $300 ..he wanted to get rid of them quick ..the rims are Enkei Klamp here are the specsWHEEL DIAMETER: 17 in.
WHEEL WIDTH: 7 in.
COLOR: Black
OFFSET: 38 mm
BOLT PATTERN: 5x100 mm
BOLT PATTERN 2: 5x114.3 mm
FINISH: Matte
WHEEL SIZE: 17x7
MARKETING COLOR: Black/Red
BORE DIAMETER: 72.6 mm
Now I was wondering if this fit on stock rx8 and what size of tires would I need for this set of rims ?
Any advice?
WHEEL WIDTH: 7 in.
COLOR: Black
OFFSET: 38 mm
BOLT PATTERN: 5x100 mm
BOLT PATTERN 2: 5x114.3 mm
FINISH: Matte
WHEEL SIZE: 17x7
MARKETING COLOR: Black/Red
BORE DIAMETER: 72.6 mm
Now I was wondering if this fit on stock rx8 and what size of tires would I need for this set of rims ?
Any advice?
#9734
Help
So I brought a set of rims from a local guy for less than $300 ..he wanted to get rid of them quick ..the rims are Enkei Klamp here are the specsWHEEL DIAMETER: 17 in.
WHEEL WIDTH: 7 in.
COLOR: Black
OFFSET: 38 mm
BOLT PATTERN: 5x100 mm
BOLT PATTERN 2: 5x114.3 mm
FINISH: Matte
WHEEL SIZE: 17x7
MARKETING COLOR: Black/Red
BORE DIAMETER: 72.6 mm
Now I was wondering if this fit on stock rx8 and what size of tires would I need for this set of rims ?
Any advice?
WHEEL WIDTH: 7 in.
COLOR: Black
OFFSET: 38 mm
BOLT PATTERN: 5x100 mm
BOLT PATTERN 2: 5x114.3 mm
FINISH: Matte
WHEEL SIZE: 17x7
MARKETING COLOR: Black/Red
BORE DIAMETER: 72.6 mm
Now I was wondering if this fit on stock rx8 and what size of tires would I need for this set of rims ?
Any advice?
Sorry i created this account ...its a 6speed standard ..right now i have stock tires and wheels ..
#9736
Registered
iTrader: (2)
Join Date: Oct 2007
Location: Pacific Northwest
Posts: 16,684
Likes: 0
Received 240 Likes
on
110 Posts
An admin is probably going to be in contact with you to pick one account so the other can be deleted. They may not ask you first though, so if one suddenly disappears, try the other.
Dual accounts are not authorized here.
Dual accounts are not authorized here.
#9738
Effin' Awesome User
I have a 2009 Sport and want to fit 18x9.5 +32 all the way around, probably with a 225 to 245 series tire with a 35 or 40 sidewall. They are Motegi MR120s. Will be sitting on Stance coils, with rolled and shaved fenders. Will it sit flush or will I need to run some camber?
Was looking at +22 offset in the same size wheel, but that would require a pull or significant camber, correct?
Was looking at +22 offset in the same size wheel, but that would require a pull or significant camber, correct?
#9740
Registered
I need cheap, lightweight rims on the rear of my 2004 MT GT. How would I know if certain 17"s will clear the lower control arm (it sits like an inch away from the inside of the rim)?
#9741
Registered
iTrader: (2)
Okay so I'm tryna buy used rpf1's so I can buy brand new tires and need to figure out the best size to get.
Can I fit 18x9.5 +38 on 265/35/18 ? And how would they look? Or what about 18x9.5 +15 on the same tires? I need a fender roll for those I believe but it's no biggie. Thanks for any input
Can I fit 18x9.5 +38 on 265/35/18 ? And how would they look? Or what about 18x9.5 +15 on the same tires? I need a fender roll for those I believe but it's no biggie. Thanks for any input
#9742
Registered
Flush as far as what? I'm running 18x9.5 +23 225/45's . Running almost -3 camber all the way around... My wheels poke out a tad but the tires tuck.
#9745
Project Seca
iTrader: (10)
Suspension: Tein S-Tech springs paired with Koni Yellow shocks
Wheel: Breyton GTS-AV Silver
18x8+45
25mm hubcentric wheel spacers bringing it to 18x8+20
Want to know if I can fit 245/40's or if I need to stay at 225/45... I want a proper alignment not camber just to fit tires.
Wheel: Breyton GTS-AV Silver
18x8+45
25mm hubcentric wheel spacers bringing it to 18x8+20
Want to know if I can fit 245/40's or if I need to stay at 225/45... I want a proper alignment not camber just to fit tires.
#9746
Effin' Awesome User
Rx8 | WHEELDUDE.COM
#9747
Registered
Would it be better with +32 then? At this point I'm considering 19's with a similar offset and width. Check link below. Just haven't seen many S2's sitting nice and there's some crap of slammed VWs around here.
Flush as far as not having poke. Three degrees wouldn't be bad since the stock suspension can go to -4.5 supposedly. I'll stretch slightly to avoid rub, but no tuck or any of that fender on lip stuff. Something like this guy but a little lower...
Rx8 | WHEELDUDE.COM
Flush as far as not having poke. Three degrees wouldn't be bad since the stock suspension can go to -4.5 supposedly. I'll stretch slightly to avoid rub, but no tuck or any of that fender on lip stuff. Something like this guy but a little lower...
Rx8 | WHEELDUDE.COM
#9748
Registered
I'd like to find out if any other fender modification, other than rolling, would be needed to fit 19x11 +21/18... If it won't, i have to roll with the 19x10.5 +27/24 ... Id also like to hear suggested tire sizes.. I was told 245/35's would do the trick but I want to get a consensus .
Current wheel and tire info:
Powertrix coil overs
MB Battles 18x9.5 +23 225/45
About -3 camber all the way around.
Current wheel and tire info:
Powertrix coil overs
MB Battles 18x9.5 +23 225/45
About -3 camber all the way around.
#9750
Registered
I'm looking for more aggressive than I already have. I don't have any rubbing issues or anything now. I guess my next question would be what would be the most I could do with just rolled fenders? Is 10.5 too wide? Alot of work to get them to fit? The 9.5's I have now just don't do it for me ..