Aggressive without rolling is impossible. That sounds like it should work out for you. I'd go with 275/35 and roll the fenders personally.

 

Roger that. I am just not comfortable with rolling so I will stick to the 255s ... I assume even 265 with that offset willrl rub the inner front?

 

265 is shorter so there wouldn't be a problem with that. Rolling is not something you should be scared of. If it's done correctly you can't tell without your head inside the fender.

 

Interesting. I guess if I'm spending the money I might as well do it right. I will look more into the rolling. Thanks for the tips

 

Will 19×9.5 +22 all four corners with stretched 235/30/19 be flush with rs*r springs?

 

^ i believe you can even go 245. Im considering a similar set up. And i think its possible with a fender roll and bit of camber from what ive been told.

 

I'm trying to get no fender roll. Which is why I'm going for the stretched tire. Plus I personally like the look.

 

Roll your damn fenders and quit being a cheap ***

 

if we are rolling the front, the inner wall has to go right?

 

Lol touche j. if I do it I might as well do it right.

 

You mean the fender liner? Nah not necessarily. You won't be aggressive enough for that with 265s and 9.5 +35

 

What about the 275 you suggested

 

Stretched tires and poke would look bad without rolled fenders I bet.

 

Still shouldn't need to but that's getting borderline aggressive. Probably will need to trim the bumper tab in the back.

 

Also nofty you should have 245/35 not 30. That would be rubber bands on your wheels and be a recipe for disaster IMO.

 

Thanks for the help j. I'm pretty new to learning the fitment scene but I love the aggressive look of being "hellaflush" lol.

 

Ty sir, appreciate the help

 

If everything works out I'll post pics of my car with 9.5 +23 245s next weekend. I just have all fenders rolled and the tab trimmed a little.

 

^ looking to run the same set up. But 19x9 +22 which is pretty close. Ill be running 245s also Cant wait !! Should look really good. Hopefully a fender roll is sufficient to fit them .

 

Look up pictures of sifus car with the 5 spoke ssr wheels. 19x9 +20 with 245s. Took a little more than a roll

 

Looks like he pulled his fenders which im absolutely 100 percent against doing. All i want to do to is a roll if anything and a bit of camber. The next offset i can go with is +29 but i dont think it would be "aggressive " enough. Here is a set up/stance i want to end up with. Would 19x9 +29 with 245s all around give me that look ?? Going to be lower on stance coilovers.

 

Your best bet is the +29 and then putting small spacers. Those will be easier to sell on here when the time comes also. Ross_dawg is +25 and looks good to me. He will probably chime in later tonight anyways.

 

The problem is im getting concave rims and obviously +22 will be more concave than the +29. I think its doable with a pulled fender and slight camber in the back. If you think about it i believe ross is running 19x9 at +25 with only pulled fenders (i think). I dont think +3mm would make a difference. Im just worried +29 wont look flush enough.

edit: so just searched a bit and looks liek all ross has is a roll and hes running +25


Hes got the stance im going for. It seems like it shouldnt be to hard to fit with a roll.

 

He doesn't have a pull and concaveness is usually only width dependent and does not change with offset.

 

hmm interesting. Thanks. And i meant to say rolled not pulled sorry, i always get the 2 confused. So it looks like ill do 19x9 +22 with 245s. If ross can do it, so can i