RE-Amemiya Strut/Sway Bars Vs MS
#1
I don't buy Kool-Aid
Thread Starter
RE-Amemiya Strut/Sway Bars Vs MS
I'm dont know what to get know that I have seen this
http://www.re-amemiya.co.jp/rx_8/05_rx_8_book_14.html
I had my heart set on getting the MS ones but I can see this in my Winning Bule 8. Oh yeah.
Anyone have these? Front and rear? Also why did they cut the carpet in the trunk? Is that someting you have to do when you install rear sway/strut bars?
Pros and cons?
http://www.re-amemiya.co.jp/rx_8/05_rx_8_book_14.html
I had my heart set on getting the MS ones but I can see this in my Winning Bule 8. Oh yeah.
Anyone have these? Front and rear? Also why did they cut the carpet in the trunk? Is that someting you have to do when you install rear sway/strut bars?
Pros and cons?
#2
Registered
iTrader: (1)
the front appears to be the same, the rear attaches to a lower point on the shock. and yea you have to cut open the carpet to install the rear strut, since the carpet covers the shock.
don't think it'll make a difference though. maybe weight?
but the re-amemiya will cost you an arm and a leg to get shipped over i reckon. MS is still expensive so I dunno. they both look pretty good but the re- would look nice in blue.
if you want pimp, check out the autoexe four point struts. that's what i want.
don't think it'll make a difference though. maybe weight?
but the re-amemiya will cost you an arm and a leg to get shipped over i reckon. MS is still expensive so I dunno. they both look pretty good but the re- would look nice in blue.
if you want pimp, check out the autoexe four point struts. that's what i want.
#4
Hot Pit
Join Date: Jul 2005
Location: Castro Valley, CA
Posts: 658
Likes: 0
Received 0 Likes
on
0 Posts
RE-Amemiya strut tower bar will not work with the US model, their brake master stopper is on the right side so no use. and you have to cut the carpet if install the rear strut bar, or take the side carpet put as shown in your own pic.
#6
Registered
iTrader: (1)
ahh... i couldn't really see the brake stopper from that pic
here's a pic of the re-amemiya front stut and there you see it
http://www.vividracing.com/catalog/images/re42.jpg
it'll work if you chop it off... so i see that MS and RE make use of the brake master stopper.
here's a pic of the re-amemiya front stut and there you see it
http://www.vividracing.com/catalog/images/re42.jpg
it'll work if you chop it off... so i see that MS and RE make use of the brake master stopper.
#8
Registered
iTrader: (1)
yea, when i helped my friend install the MS strut, we only needed to cut a few square inches in the carpet on each side. this attaches to the bottom point, but i do think you can still put the carpet back on. maybe w/o any cutting cuz of it being at the bottom. the carpet just might go over it.
#9
Originally Posted by NgoRX8
#12
Out of NYC
iTrader: (1)
Originally Posted by Winning 8
RE-Amemiya strut tower bar will not work with the US model, their brake master stopper is on the right side so no use. and you have to cut the carpet if install the rear strut bar, or take the side carpet put as shown in your own pic.
#13
I don't see any use for the brake stopper. It's just a bracket attached to the brake housing.
I could have sworn I have seen pictures of the AE struct from the right hand side of the car.
I like that blue.
The Auto exe is ugly.
I heard the RX7 strut bars work if you get the ones that are adjustable, There also alot cheaper.
I could have sworn I have seen pictures of the AE struct from the right hand side of the car.
I like that blue.
The Auto exe is ugly.
I heard the RX7 strut bars work if you get the ones that are adjustable, There also alot cheaper.
#14
I don't buy Kool-Aid
Thread Starter
Originally Posted by nycgps
Im sorry but what is brake master stpper ?
Thread
Thread Starter
Forum
Replies
Last Post
Steve Dallas
RX-8 Parts For Sale/Wanted
0
09-19-2015 09:39 AM