quick question about rb springs
#1
jonathan
Thread Starter
Join Date: Apr 2005
Location: irvine
Posts: 40
Likes: 0
Received 0 Likes
on
0 Posts
quick question about rb springs
hey guys, i was just wondering who has rb springs, perhaps with konis cuz that is the set up i have could let me know how many finger gap there should be between the wheel and the fender. for some reason my front seems kinda higher than what i expected. thanks again.
#3
Registered
iTrader: (1)
as long as it doesn't look higher than stock, i think it's fine. it really is hard to see if you're lowered with rb springs because they are so conservative. Plus you also have to remember than the springs need a few days to settle. If you tightened your upper control arms with the car on the ground, you should be fine.
shocks won't go about as to adjust the height of the car. Only springs or coilovers adjust the height.
shocks won't go about as to adjust the height of the car. Only springs or coilovers adjust the height.
#4
Recovered Modaholic
I've been running Koni's with RB springs for quite a while now. They settled in at 14.25" from center of hub to fender lip in front and just a smidge over 14" in the rear. Stock, new was 15.25" all the way around.
#6
OldeSpeede, Inc.
Join Date: Apr 2004
Location: Costa Mesa, CA
Posts: 307
Likes: 0
Received 0 Likes
on
0 Posts
With my Konis and RB springs, i have two fingers between the tire and the fender. I noticed more drop after the konis installed, so i think the shocks may be shorter themselves.
Thread
Thread Starter
Forum
Replies
Last Post
Rupanrx
Series I Aftermarket Performance Modifications
1
09-04-2015 06:44 AM