Waring light: Headlight auto level and squeaky clutch pedal
#1
Extraordinary Engineering
Thread Starter
Waring light: Headlight auto level and squeaky clutch pedal
1) My headlight auto level warning light is on 90% of the time. The dealer has replaced the rear ride height sensor but the problem remains. The car is due back for another round of trouble-guessing. Has anyone had this problem solved?
2) My clutch pedal squeaks near the bottom of its travel. The dealer has replaced the assembly and applied lube but the squeak remains. Any ideas?
Thanks
2) My clutch pedal squeaks near the bottom of its travel. The dealer has replaced the assembly and applied lube but the squeak remains. Any ideas?
Thanks
#4
Extraordinary Engineering
Thread Starter
Auto level light was fixed today with a new sensor.
The clutch pedal assembly was lubricated again but the squeak remains. The tech working on the car wrote that he had the shop foreman confirm that the squeak was fixed. APPARENTLY THEY ARE ALL DEAF.
The clutch pedal assembly was lubricated again but the squeak remains. The tech working on the car wrote that he had the shop foreman confirm that the squeak was fixed. APPARENTLY THEY ARE ALL DEAF.
Last edited by DarkBrew; 07-11-2006 at 06:33 PM.
#5
Registered User
There are 4 possible sources of noise that I found,the pedal pivots,the clutch cylinder,and 2 switches---in my case a push rod on the lower switch was making the noise and some silicone grease quieted it.
You have to get right into the footwell and identify the source for your car.
You have to get right into the footwell and identify the source for your car.
#6
Registered User
Join Date: Apr 2006
Location: Portland, OR
Posts: 64
Likes: 0
Received 0 Likes
on
0 Posts
I have it too, last time my car was in they lubricated it and it went away for a couple of thousand miles. It's due for it's first service so I'll just get them to lube it again.
#7
Extraordinary Engineering
Thread Starter
Originally Posted by two rotors
There are 4 possible sources of noise that I found,the pedal pivots,the clutch cylinder,and 2 switches---in my case a push rod on the lower switch was making the noise and some silicone grease quieted it.
You have to get right into the footwell and identify the source for your car.
You have to get right into the footwell and identify the source for your car.
#9
Rotary lover
I posted at a other thread about the squeak problem,mine also has it.But also my thrust bearing is very noisy, it always was but I think now a bit more, especially if you release the clutch.I can feel a roughness(griding) in the pedal (feedback) when pressing and especially when depressing the clutch pedal, besides the squeak.
Is this common, is it the thrust bearing at clutch or the gearbox?
Thanks guys
Philip
Is this common, is it the thrust bearing at clutch or the gearbox?
Thanks guys
Philip
Thread
Thread Starter
Forum
Replies
Last Post
LMURailsplitter02
New Member Forum
1
09-06-2015 10:56 PM