Migi'sBatmobile

Now MM did recomend that i am to increase the size of the MAF pipe to 3.5, not the 3.0 that you see above.

I am going to have that done tomorrow however both the BOV and the MAF will be on the same pipe.

I was told 6 inches from the throttle body and 6 inches away from the BOV.

Is this correct????

swoope

iTrader: (5)

what you have and all emseril turbos have is a blow through design. i dont think mm has made maps for the ap, yet..

beers

05rex8

iTrader: (7)

wow, that engine bay is cluttered.
after I installed my GReddy turbo kit, I was wishing it had a top mounted turbo like yours...but after seeing some close ups, I'm glad I got the Greddy

my engine bay looks nice and clean

Kane

iTrader: (1)

Yes; you want to be as far away from any air turbulance that you can be. And changing the pipe to 3.5" is taking it back to stock size so the scaling is closer and allows for more airflow.

Gmanigio

I hope MM is right about the MAF tube causing this problem.

If you want, Ill help you go back to stock and you can sell the car........ lol

Migi'sBatmobile

Thanks kane for the info.....

I just ordred a 3.5 diameter maf pipe and should get it tomorrow....

Then i cross my fingers and if not, I buy a 2008 GTR............. j/k

Kane

iTrader: (1)

Be sure to have some screens made to - that might help.

Best way to do it; is set it all up and idle the car - see if the MAF reading is a)stable and b) between 5.5 and 7 Grams per sec.

Migi'sBatmobile

So i had a 3.5 inch maf pip manufactored for me and now the STFT is about 0%, however it just wont drive. Again it bounces around when it does come close to load. So what i also did is change the 1000cc injectors the Esmeril Kit came with and installed the oem. The same.
I am just going to give it to a Rotary shop near me to fix the problem. After 3 months of waiting, I give up..

Thanks for all the help. And i will post a vid on here once its running....

1Point3

Super old post but i am having the exact problem/situation........what did u do???

faith&firepower

iTrader: (1)

Same issues here!!! I need some answers.....