Throw Out Bearing failure on new clutch
07-16-2013, 01:47 PM
#26
Registered
Join Date: Sep 2008
Posts: 54
Likes: 0
Received 0 Likes
on
0 Posts
Hi All,
Just to know if I'm concerned.
I installed an Exidy stage 1(not HD), BHR flywheel, act cw, BHR hd release bearing (skf) since 2010. 25kmiles and 4 trackdays with no problem.
The car has been serviced for a year to install some stuffs like a rollcage.
The mastervrac and the pedals will be unistalled and reinstalled.
Oil has been changed with redline 75W140.
The circuit bled.
After that, at the very first try, I had the problem.
The problem is the clutch pedal can be depressed half way without any resistance, after the feeling is normal.
When hot (engine oil 195-212F) and hard upshift, is really problematic the 3rd to 4th, less the 4th to 5th.
Double de-clutch seems to work...
Thanking you in advance
The gearbox is an EUDM 6Y 2004 with 63kmiles.
Just to know if I'm concerned.
I installed an Exidy stage 1(not HD), BHR flywheel, act cw, BHR hd release bearing (skf) since 2010. 25kmiles and 4 trackdays with no problem.
The car has been serviced for a year to install some stuffs like a rollcage.
The mastervrac and the pedals will be unistalled and reinstalled.
Oil has been changed with redline 75W140.
The circuit bled.
After that, at the very first try, I had the problem.
The problem is the clutch pedal can be depressed half way without any resistance, after the feeling is normal.
When hot (engine oil 195-212F) and hard upshift, is really problematic the 3rd to 4th, less the 4th to 5th.
Double de-clutch seems to work...
Thanking you in advance
The gearbox is an EUDM 6Y 2004 with 63kmiles.
Last edited by vcoil; 07-17-2013 at 08:58 AM.
07-16-2013, 02:32 PM
#27
Hi All,
Just to know if I'm concerned.
I installed an Exidy stage 1(not HD), BHR flywheel, act cw, BHR hd release bearing (skf) since 2010. 25kmiles and 4 trackdays with no problem.
The car has been serviced for a year to install some stuffs like a rollcage.
The mastervrac and the pedals will be unistalled and reinstalled.
Oil has been changed with redline 75W140.
The circuit bled.
Before that, at the very first try, I had the problem.
The problem is the clutch pedal can be depressed half way without any resistance, after the feeling is normal.
When hot (engine oil 195-212F) and hard upshift, is really problematic the 3rd to 4th, less the 4th to 5th.
Double de-clutch seems to work...
Thanking you in advance
The gearbox is an EUDM 6Y 2004 with 63kmiles.
Just to know if I'm concerned.
I installed an Exidy stage 1(not HD), BHR flywheel, act cw, BHR hd release bearing (skf) since 2010. 25kmiles and 4 trackdays with no problem.
The car has been serviced for a year to install some stuffs like a rollcage.
The mastervrac and the pedals will be unistalled and reinstalled.
Oil has been changed with redline 75W140.
The circuit bled.
Before that, at the very first try, I had the problem.
The problem is the clutch pedal can be depressed half way without any resistance, after the feeling is normal.
When hot (engine oil 195-212F) and hard upshift, is really problematic the 3rd to 4th, less the 4th to 5th.
Double de-clutch seems to work...
Thanking you in advance
The gearbox is an EUDM 6Y 2004 with 63kmiles.
03-22-2016, 06:02 PM
#28
Threadsurrection
Sorry for the major thread revival. General consensus here is to stick with OEM TOB to avoid issues. I plan on getting my build together this summer and just gathered parts. I see here many people have ordered a variety of exedy clutched from "stage 1" to "HD" etc. I was wondering if anyone had part numbers for the TOB and if all exedy TOB's have plastic internals. Main reason is, i ordered the "OEM" clutch replacement P/N: MZK1002 with the TOB P/N: BRG0145. Thanks folks!
03-23-2016, 08:51 AM
#30
Thread
Thread Starter
Forum
Replies
Last Post
tommy26Germany
Series I Trouble Shooting
11
09-29-2015 10:33 AM
