Steering torque sensor cap
11-21-2018, 08:54 AM
#1
Steering torque sensor cap
Hi guys,
Does anyone know if the top part clips or screws down onto the bottom part, or does it just stay there loosely?
Thanks
Top part sitting on the torque position sensor
Does anyone know if the top part clips or screws down onto the bottom part, or does it just stay there loosely?
Thanks
Top part sitting on the torque position sensor
11-21-2018, 09:06 AM
#2
The Blue Blur
iTrader: (3)
Join Date: Apr 2010
Location: Green Hill Zone Running in Loops
Posts: 1,857
Received 3,608 Likes
on
2,571 Posts
The bottom part has 3 screws that attach it to the steering rack, the top part is smushed in place by the steering column
edit: here's a pdf with important specs and what not
http://www.rotaryheads.com/PDF/RX8/8Steering.PDF
edit: here's a pdf with important specs and what not
http://www.rotaryheads.com/PDF/RX8/8Steering.PDF
Last edited by sonicsdaman; 11-21-2018 at 09:08 AM.
The following users liked this post:
cisjga (11-22-2018)
11-22-2018, 08:14 AM
#3
Thanks for all the info. It is just forced in place by the steering column then. No real super tight seal etc. I can lift the boot up but not past the steering column so all the above makes sense now.
Thread
Thread Starter
Forum
Replies
Last Post
Nopstnz8
Series I Trouble Shooting
8
12-10-2012 11:26 PM