Notices
Series I Trouble Shooting This is the place to learn more about or discuss any issues you're having with your RX-8

05 rx8 misfire

Old Jan 5, 2010 | 07:10 AM
  #1  
tomfdr88's Avatar
Thread Starter
Registered User
 
Joined: May 2008
Posts: 6
Likes: 0
05 rx8 misfire

I have an 05 rx8 with 50k miles on it. Whenever I seem to start it after it has not been running for a while (>5-6 hours) it seems to misfire more often then not. It also seems to happen more frequently in cold weather than in hot weather. Any thoughts on what the problem is? I am thinking it may be the plugs/wires but I am assuming that these were replaced when I had to get a new engine put in a year and 1/2 ago at 25k miles.
Reply
Old Jan 5, 2010 | 11:23 AM
  #2  
Old Rotor's Avatar
Registered
 
Joined: Jul 2004
Posts: 2,196
Likes: 0
From: Northern California
You don't know about the spark plugs so that wires and coils are a good place to start. When you say misfire what exactly are you seeing?
Reply
Old Jan 5, 2010 | 11:34 AM
  #3  
tomfdr88's Avatar
Thread Starter
Registered User
 
Joined: May 2008
Posts: 6
Likes: 0
Re

When I say misfire I get a CEL(ran the codes which indicated misfires) that blinks when I start up and I get a high idle that sounds like the timing is off. After a minute or 2 the idle decreases, the light stops blinking and the car runs normal.
Reply
Old Jan 5, 2010 | 11:37 AM
  #4  
sebarx8's Avatar
seebass
iTrader: (4)
 
Joined: Jan 2008
Posts: 1,004
Likes: 0
From: bloomfield nj now in miami ahhhh back in jersey now jajajjaja
hi , i got a 05 and after 4 1/2 years my 8 need it new spark plugs ,my has 50508
the code i had was p0301
i guess im lucky

Last edited by sebarx8; Jan 5, 2010 at 11:49 AM.
Reply
Old Jul 20, 2010 | 11:01 AM
  #5  
MajestciRx8's Avatar
Registered User
 
Joined: Jun 2010
Posts: 3
Likes: 0
Hi i have just changed the plugs leads and coils, it still idles below 1000rpm roughly 850 to 750 rpm, has a little shake on it when its parked up an idle. slight misfire from the car. any ideas
Reply
Old Jul 20, 2010 | 11:10 AM
  #6  
maskedferret's Avatar
Oooh, shiny!
iTrader: (1)
 
Joined: Oct 2006
Posts: 908
Likes: 2
From: St. Louis, MO
Quick question: Will a misfire ALWAYS blink a CEL?
Reply
Old Jun 19, 2011 | 03:06 PM
  #7  
big nick's Avatar
Registered User
 
Joined: Jun 2011
Posts: 2
Likes: 0
my #1 cylinder is misfiring. ive changed the plugs, coils and wires but the code keeps coming up. Any input?
Reply
Old Jun 19, 2011 | 03:09 PM
  #8  
RX8Soldier's Avatar
Time for boost...
iTrader: (24)
 
Joined: Jun 2010
Posts: 5,414
Likes: 17
From: Canada
Originally Posted by big nick
my #1 cylinder is misfiring. ive changed the plugs, coils and wires but the code keeps coming up. Any input?
Are all of your plugs/ coils/ wires going to the right connections? Are they all seated properly?
Reply
Old Jun 19, 2011 | 03:10 PM
  #9  
Mazurfer's Avatar
Surf Hard, Drive Hard
 
Joined: Feb 2007
Posts: 7,840
Likes: 13
From: Indialantic, Florida
Damn Soldier...that's twice you bet me to the punch! Screw it, I'm going to go workout.


Nick.....click below for ideas!

Search misfire via rx8club via Google
Reply
Old Jun 19, 2011 | 03:32 PM
  #10  
RX8Soldier's Avatar
Time for boost...
iTrader: (24)
 
Joined: Jun 2010
Posts: 5,414
Likes: 17
From: Canada
Originally Posted by Mazurfer
Damn Soldier...that's twice you bet me to the punch! Screw it, I'm going to go workout.


Nick.....click below for ideas!

Search misfire via rx8club via Google
hah It's why I get my work out finished early in the morning Plus, not having a life for the next few days will help me with the draw...
Reply
Old Jun 19, 2011 | 03:59 PM
  #11  
wcs's Avatar
wcs
no agenda
iTrader: (2)
 
Joined: Feb 2005
Posts: 5,210
Likes: 67
From: Ontario
Originally Posted by maskedferret
Quick question: Will a misfire ALWAYS blink a CEL?
Nope
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Jaco Greyling
New Member Forum
3
Jan 6, 2019 08:39 AM
cushing75
New Member Forum
18
Nov 12, 2018 12:46 PM
PTQLam
Series I Aftermarket Performance Modifications
4
Aug 16, 2015 05:40 PM
MarkX
New Member Forum
3
Jul 31, 2015 07:50 AM
madrotor
New Member Forum
2
Jul 26, 2015 12:06 PM


Thread Tools
Rate This Thread
Rate This Thread:
You have already rated this thread Rating: Thread Rating: 0 votes,  average.


All times are GMT -5. The time now is 03:03 PM.