Notices
Series I Trouble Shooting This is the place to learn more about or discuss any issues you're having with your RX-8

Noises from what sounds like the shock?

Thread Tools
 
Rate Thread
 
Old Jun 18, 2011 | 03:47 AM
  #1  
StreetGT's Avatar
Thread Starter
Registered
 
Joined: Nov 2010
Posts: 244
Likes: 0
From: Berkeley, CA
Noises from what sounds like the shock?

So a while ago I recently noticed some strange noises coming from the front left corner of the car. I at first didn't notice it because it sounds a lot like running over one of those metal grates in the street, kind of a metal clangy noise and then realized every time i was on a bumpy street it would just do it over and over again.

I recently installed a new exhaust and was worried some of the bolts were coming out but i've since checked and retorqued all the bolts down there so it's not that.

If I run over small bumps on the right side of my car there is no noise, but on the left side it makes a very prominent clangy noise.

I'm totally lost on this.. I have truly no idea and can't test for it easily because I need to be driving to make the noise. Please mention it if you have any ideas..
Reply
Old Jun 18, 2011 | 06:26 AM
  #2  
DarkBrew's Avatar
Extraordinary Engineering
 
Joined: Oct 2005
Posts: 4,733
Likes: 14
From: Burls On
The swaybar links are a typical cause of clunking... not the bolts but the link pivot points.
Reply
Old Jun 18, 2011 | 01:24 PM
  #3  
StreetGT's Avatar
Thread Starter
Registered
 
Joined: Nov 2010
Posts: 244
Likes: 0
From: Berkeley, CA
How do I fix it?
Reply
Old Jun 19, 2011 | 03:17 AM
  #4  
StreetGT's Avatar
Thread Starter
Registered
 
Joined: Nov 2010
Posts: 244
Likes: 0
From: Berkeley, CA
FIXED
The front brake guards that protect the inside part of the rotor were a little to close to the actual rotor so I just bent it out a bit.
Reply
Old Jun 19, 2011 | 08:21 AM
  #5  
DarkBrew's Avatar
Extraordinary Engineering
 
Joined: Oct 2005
Posts: 4,733
Likes: 14
From: Burls On
Originally Posted by StreetGT
FIXED
The front brake guards that protect the inside part of the rotor were a little to close to the actual rotor so I just bent it out a bit.
Any thoughts on how it got bent?

Originally Posted by StreetGT
How do I fix it?
And if your SB links get loose you have to replace them
Reply
Old Jun 19, 2011 | 05:45 PM
  #6  
StreetGT's Avatar
Thread Starter
Registered
 
Joined: Nov 2010
Posts: 244
Likes: 0
From: Berkeley, CA
No idea why it started rattling.. But it was a very simple fix.

Unfortunately, there are still a few little rattling noises that need to be dealt with, they are much quieter and from a different location, sounds like it might be the exhaust but i just retorqued all the bolts so who knows.

More importantly.. While I had the wheel off i noticed this... If I'm not mistaken that looks like a servo connected to the sway bar links with a broken bolt.



What in the world do I do about this..?

Last edited by StreetGT; Jun 19, 2011 at 05:48 PM.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
92trbolzr
Series I Trouble Shooting
31
May 18, 2025 09:04 AM
duworm
Series I Wheels, Tires, Brakes & Suspension
1
Oct 1, 2015 04:57 PM
Racingjunkie
Series I Wheels, Tires, Brakes & Suspension
2
Sep 29, 2015 05:05 PM
tommy26Germany
Series I Trouble Shooting
11
Sep 29, 2015 10:33 AM
Jb4ker96
Series I Trouble Shooting
0
Sep 27, 2015 10:06 PM



You have already rated this thread Rating: Thread Rating: 0 votes,  average.


All times are GMT -5. The time now is 07:36 PM.