Using injector cleaner
#27
Originally Posted by Unhooked
This is how i did for my 04 GTP,,,yes its behind the brake fuild container...there is a rubber hose that connects to the firewall on one end and the other end goes into the throttle body.
You have to disconnect that hose and cover it with your thumb...once you have a person in the car and its warm....let go of yer thumb and put in the Seafoam while the person in the car makes sure the car doesn't die from chugging. After finishing with the seafoam let the car die and wait for half hour or so before starting it.
When you do start it, it maybe hard and will idle ruff bt will smoothen out slowly
Hope this helps
In your case what I am thinking happened is that the Seafoam was sitting in your intake...and when you finally began driving it..it went in the throttle body and made it chugg and then stalled. SO in other words nothing bad happened..
Just wait for sometime and then start the car..bt make sure the car starts the first time since its a Rotary and Flodding issues blah blah
You have to disconnect that hose and cover it with your thumb...once you have a person in the car and its warm....let go of yer thumb and put in the Seafoam while the person in the car makes sure the car doesn't die from chugging. After finishing with the seafoam let the car die and wait for half hour or so before starting it.
When you do start it, it maybe hard and will idle ruff bt will smoothen out slowly
Hope this helps
In your case what I am thinking happened is that the Seafoam was sitting in your intake...and when you finally began driving it..it went in the throttle body and made it chugg and then stalled. SO in other words nothing bad happened..
Just wait for sometime and then start the car..bt make sure the car starts the first time since its a Rotary and Flodding issues blah blah
THANKS!!!
I disconnect the end that goes into the firewall & pour down that end, right?
also, should i have any problems w/ my soaked k&n filter???
#28
Registered
Join Date: Jul 2006
Location: Atlanta, GA
Posts: 202
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by dgrx8
THANKS!!!
I disconnect the end that goes into the firewall & pour down that end, right?
also, should i have any problems w/ my soaked k&n filter???
I disconnect the end that goes into the firewall & pour down that end, right?
also, should i have any problems w/ my soaked k&n filter???
Right now just concentrate on starting the car and letting it idle smoothly
#30
ok... the car idles just fine now & i don't have a CEL.
i checked under the hood & my soaked filter seems to be drying up well...
i saw a rubber hose that comes out of the fire wall just to the LEFT (not behind) of the brake fluid container. it doesn't connect directly into the throttle body, though. it goes passed the TB & connects somewhere around the manifold... not sure if this is the right hose or not... can anyone help w/ this?
thanks
i checked under the hood & my soaked filter seems to be drying up well...
i saw a rubber hose that comes out of the fire wall just to the LEFT (not behind) of the brake fluid container. it doesn't connect directly into the throttle body, though. it goes passed the TB & connects somewhere around the manifold... not sure if this is the right hose or not... can anyone help w/ this?
thanks
Thread
Thread Starter
Forum
Replies
Last Post
Evan Gray
Series I Trouble Shooting
0
09-26-2015 12:30 PM