Spark Plug Wires?
#1
Registered User
Thread Starter
Join Date: Feb 2011
Location: Houston, TX
Posts: 40
Likes: 0
Received 0 Likes
on
0 Posts
Spark Plug Wires?
i ran a search for spark plug wires and returned an old thread back in 2004? saying no wires were out and ngk were no good. only racing beat
im basically asking what should and shouldnt be ran with my car
im only finding magnacore, racingbeat and ngk on ebay along with no names.
thanks
looking at some mazdatrix wires
im basically asking what should and shouldnt be ran with my car
im only finding magnacore, racingbeat and ngk on ebay along with no names.
thanks
looking at some mazdatrix wires
Last edited by SoliceDreamer; 11-30-2011 at 10:44 PM.
#3
BECAUSE RACECAR
iTrader: (10)
You can get MSD wires from Black Halo Racing that are made in the correct lengths for our car.
http://blackhaloracing.com/?page_id=...product_id=141
http://blackhaloracing.com/?page_id=...product_id=141
#4
Registered User
Thread Starter
Join Date: Feb 2011
Location: Houston, TX
Posts: 40
Likes: 0
Received 0 Likes
on
0 Posts
#6
Registered User
Thread Starter
Join Date: Feb 2011
Location: Houston, TX
Posts: 40
Likes: 0
Received 0 Likes
on
0 Posts
#8
Registered User
Thread Starter
Join Date: Feb 2011
Location: Houston, TX
Posts: 40
Likes: 0
Received 0 Likes
on
0 Posts
no one really talked about the mazdatrix but i found something else i needed as was going to ask, see we're all friends here
#11
Registered User
Thread Starter
Join Date: Feb 2011
Location: Houston, TX
Posts: 40
Likes: 0
Received 0 Likes
on
0 Posts
#13
Registered Maniac
Join Date: Dec 2011
Location: Sterling, VA
Posts: 70
Likes: 0
Received 0 Likes
on
0 Posts
#14
Registered
Join Date: Jul 2011
Location: Orange County, California
Posts: 38
Likes: 0
Received 0 Likes
on
0 Posts
When I initially did the install I tried the matching wire length method one wire at a time, since I wasn't exactly certain what the numbers or color codes indicated. However, on the last wire it seemed like I ended up with one really short OEM and one really long NGK; I had obviously done something wrong. So I simply took note of each coil position and which one lead to which plug on each rotor, pulled all the wires out, laid them down and matched each OEM to each NGK as closely as possible and came out with the above order which seems to be the correct one.
Hope this helps.
#16
Registered Maniac
Join Date: Dec 2011
Location: Sterling, VA
Posts: 70
Likes: 0
Received 0 Likes
on
0 Posts
When I initially did the install I tried the matching wire length method one wire at a time, since I wasn't exactly certain what the numbers or color codes indicated. However, on the last wire it seemed like I ended up with one really short OEM and one really long NGK; I had obviously done something wrong. So I simply took note of each coil position and which one lead to which plug on each rotor, pulled all the wires out, laid them down and matched each OEM to each NGK as closely as possible and came out with the above order which seems to be the correct one.
Hope this helps.
Hope this helps.
#17
Registered Maniac
Join Date: Dec 2011
Location: Sterling, VA
Posts: 70
Likes: 0
Received 0 Likes
on
0 Posts
#18
Registered
To make it less annoying to search add in a www. before the rx8club.com and it will get rid of all the Mobile results that you can get.
site:www.rx8club.com
#19
Thread
Thread Starter
Forum
Replies
Last Post
TeslaMSI
New Member Forum
11
12-10-2015 01:10 AM