Spark Plug Wires?
i ran a search for spark plug wires and returned an old thread back in 2004? saying no wires were out and ngk were no good. only racing beat
im basically asking what should and shouldnt be ran with my car im only finding magnacore, racingbeat and ngk on ebay along with no names. thanks looking at some mazdatrix wires |
|
You can get MSD wires from Black Halo Racing that are made in the correct lengths for our car.
http://blackhaloracing.com/?page_id=...product_id=141 |
Originally Posted by RX8Soldier
(Post 4135695)
|
you can use that same technique to search for aftermarket...
|
Originally Posted by RX8Soldier
(Post 4135707)
you can use that same technique to search for aftermarket...
|
are you sure you're using the site:rx8club.com method? I just found a bunch of threads. Sure, I could post them. But, I could also not. Too many spoon-fed n00bs lately.
Either use site:rx8club.com method, or go to the diy forum and read the sticky "how to search" |
Originally Posted by RX8Soldier
(Post 4135719)
are you sure you're using the site:rx8club.com method? I just found a bunch of threads. Sure, I could post them. But, I could also not. Too many spoon-fed n00bs lately.
Either use site:rx8club.com method, or go to the diy forum and read the sticky "how to search" |
just here to help :)
|
I replaced my OEM's with NGK wires for $20. Not a single problem with them so far.
|
Originally Posted by Nines
(Post 4137034)
I replaced my OEM's with NGK wires for $20. Not a single problem with them so far.
|
Originally Posted by SoliceDreamer
(Post 4137044)
i thought about that, but read up to stay away from them.
|
Originally Posted by Nines
(Post 4137034)
I replaced my OEM's with NGK wires for $20. Not a single problem with them so far.
|
Originally Posted by Daveydave
(Post 4151322)
Hey Nines, does it matter which number goes with which coil? The two blues look identical lengths as do the blacks. Only the 1 and 2 on them.
When I initially did the install I tried the matching wire length method one wire at a time, since I wasn't exactly certain what the numbers or color codes indicated. However, on the last wire it seemed like I ended up with one really short OEM and one really long NGK; I had obviously done something wrong. So I simply took note of each coil position and which one lead to which plug on each rotor, pulled all the wires out, laid them down and matched each OEM to each NGK as closely as possible and came out with the above order which seems to be the correct one. Hope this helps. |
The order of coil to plug is critical.
A pic is often best to make sure there is no misunderstanding. Just follow the wire from which coil to which plug. http://i.ebayimg.com/02/!B+VIGSgBmk~...850!w~~_35.JPG |
Originally Posted by Nines
(Post 4151607)
When I initially did the install I tried the matching wire length method one wire at a time, since I wasn't exactly certain what the numbers or color codes indicated. However, on the last wire it seemed like I ended up with one really short OEM and one really long NGK; I had obviously done something wrong. So I simply took note of each coil position and which one lead to which plug on each rotor, pulled all the wires out, laid them down and matched each OEM to each NGK as closely as possible and came out with the above order which seems to be the correct one.
Hope this helps. |
Originally Posted by RIWWP
(Post 4151623)
The order of coil to plug is critical.
A pic is often best to make sure there is no misunderstanding. Just follow the wire from which coil to which plug. http://i.ebayimg.com/02/%21B+VIGSgBm...w%7E%7E_35.JPG Dave |
Originally Posted by RX8Soldier
(Post 4135719)
are you sure you're using the site:rx8club.com method? I just found a bunch of threads. Sure, I could post them. But, I could also not. Too many spoon-fed n00bs lately.
Either use site:rx8club.com method, or go to the diy forum and read the sticky "how to search" To make it less annoying to search add in a www. before the rx8club.com and it will get rid of all the Mobile results that you can get. site:www.rx8club.com |
|
Guys should i use any tools for that or should i just place it on the plug and push it forcefully?
Also, what is the right way to remove the plug wire from plug by using hand? |
All times are GMT -5. The time now is 03:37 AM. |
© 2024 MH Sub I, LLC dba Internet Brands