Notices
Series I Tech Garage The place to discuss anything technical about the RX-8 that doesn't fit into any of the categories below.

Resetting the AC, what does it do?

Thread Tools
 
Rate Thread
 
Old Aug 16, 2009 | 07:10 PM
  #1  
tmak26b's Avatar
Thread Starter
Registered User
 
Joined: Oct 2004
Posts: 1,141
Likes: 0
Resetting the AC, what does it do?

I am just curious as to what happens to the AC system after the reset? I did the AC reset as instructed on rx8blog.com. I do have to admit it actually works as my AC cycles less and it is noticeably colder.
Reply
Old Aug 16, 2009 | 07:24 PM
  #2  
Low Fly'n 8's Avatar
Registered User
 
Joined: Aug 2004
Posts: 346
Likes: 0
I believe it just defaults to "reirc" anytime you turn the air on.

AC RESET:

1. Make sure the car is off AND the HVAC fan is off AND the A/C on/off button is off.
2. Press and hold the front defroster (on the left) AND air source (recirc/fresh air) buttons
3. Continue pressing the buttons in step 2 and turn the key to ACC for 3 seconds
4. Continue pressing the buttons in step 2 and further turn the key to ON (NOT START) for 3 sec.
5. Verify the programming update by observing the REAR defroster LED blink 3 times.
6. Release the two buttons from step 2 and start the car.

Last edited by Low Fly'n 8; Aug 16, 2009 at 07:30 PM.
Reply
Old Aug 17, 2009 | 12:31 AM
  #3  
swoope's Avatar
Zoom-Freakin'-Zoom
iTrader: (5)
 
Joined: Jan 2004
Posts: 14,603
Likes: 36
From: orlando, fl
you answered your own question.

it keeps the compressor from cycling as often, and when you turn it to full cold it switches to recirc... and yes, it helps a lot.

beers
Reply
Old Aug 17, 2009 | 11:28 AM
  #4  
Nubo's Avatar
Lubricious
 
Joined: Oct 2003
Posts: 3,425
Likes: 4
From: SF Bay Area, California
Changes the "duty cycle"
from
on-off-on-off-on-off-on-off

to

on............off...on............off...on........ .....

And puts AC in recirc mode whenever ambient temp is over 68F, temp set to min. and vents are in "face mode.
Reply
Old Aug 17, 2009 | 02:22 PM
  #5  
tmak26b's Avatar
Thread Starter
Registered User
 
Joined: Oct 2004
Posts: 1,141
Likes: 0
What makes the system cycle less before the set?
Reply
Old Aug 20, 2009 | 12:23 AM
  #6  
swoope's Avatar
Zoom-Freakin'-Zoom
iTrader: (5)
 
Joined: Jan 2004
Posts: 14,603
Likes: 36
From: orlando, fl
programing of ac amplifier..

beers
Reply
Old Aug 20, 2009 | 12:28 AM
  #7  
9krpmrx8's Avatar
SARX Legend
iTrader: (46)
 
Joined: Jan 2007
Posts: 33,788
Likes: 462
From: San Antonio, Texas
Cool, have to try this.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
cliffkemp
Series I Trouble Shooting
8
Dec 24, 2024 10:48 AM
OnebaddRx8
Series I Trouble Shooting
24
Aug 25, 2019 11:34 PM
fistofmeat
Series I Trouble Shooting
8
Oct 7, 2016 12:15 PM
TheRedRotor
Series I Wheels, Tires, Brakes & Suspension
3
Sep 22, 2015 05:30 AM
iwannarun
New Member Forum
1
Sep 6, 2015 01:37 PM



You have already rated this thread Rating: Thread Rating: 0 votes,  average.


All times are GMT -5. The time now is 06:26 PM.