http://www.harborfreightusa.com/usa/...o?itemid=94879

I found this thing on sale so I figured it wouldn't hurt to try. Does the RX8 take F106 with a M14 x 1.5 thread plug?

Thanks for your help.

 

Use a Pela Oil extractor instead - then you don't have to crawl under the car at all.

I have this model and it works great with the 8 - I can get a solid 5 quarts out with it while most others can only get 4.5 quarts out on a change.

http://www.overtons.com/modperl/prod...w&i=27266&aID=

 

I used the Fram drain on an 87 RX-7.
It worked but the flow was slow so it took a long time to drain the sump.

I'm not crazy about jacking, but it's good to periodically have a look under the car for other problems.

 

Fumoto Valve here. 3 years; works like a champ.