Notices
Series I Tech Garage The place to discuss anything technical about the RX-8 that doesn't fit into any of the categories below.

Is this exhaust worth getting?

Thread Tools
 
Search this Thread
 
Rate Thread
 
Old 05-04-2012, 10:35 AM
  #26  
Registered
 
brilliantblackrx8's Avatar
 
Join Date: Jul 2007
Posts: 669
Likes: 0
Received 1 Like on 1 Post
Originally Posted by JCrane82
^^^^What brand is that? I haven't seen that one before.
Greddy EVOTT, it's discontinued. Fit, finish and sound is great and no burning of the exhaust shrouds. Some of those ebay exhausts don't look bad at all for the money, but I have never physically seen one.
Old 05-14-2012, 01:27 AM
  #27  
Registered
 
StreetGT's Avatar
 
Join Date: Nov 2010
Location: Berkeley, CA
Posts: 244
Likes: 0
Received 0 Likes on 0 Posts
I have been there and done that. Had an eBay exhaust for quite a while it was the 4caroption variant got it for like 200 dollars if that.

Sounded great and was cheap which made it even more satisfying, down side was the welds for the hangers were not great and it simply lacked 2 of the 4 hangers, so the hanger fell off, but it was only a 20 dollar fix at the local muffler shop.

I may be one of the few people here to tell you that if you don't have much money and really want a new exhaust, those ebay ones are not a bad option. Just don't sell your stock...
Old 05-14-2012, 06:59 AM
  #28  
Registered
 
brilliantblackrx8's Avatar
 
Join Date: Jul 2007
Posts: 669
Likes: 0
Received 1 Like on 1 Post
To add to that, I know a lot of people don't like a single, but the HKS hi-power is a great exhaust for someone on a budget, and honestly it looks pretty cool and sounds a lot better than any of these.
Old 05-14-2012, 08:13 AM
  #29  
Flame On!
iTrader: (4)
 
1.3_LittersOfFurry's Avatar
 
Join Date: Jan 2011
Location: New Orleans, La
Posts: 1,897
Likes: 0
Received 4 Likes on 4 Posts
I went the raceroots single exit.. It's a tad bit louder than I would like but I'm catless too.

Here a few clips of me playing around with it. It does sound deeper than the video, but not by much.

Old 05-14-2012, 04:20 PM
  #30  
Zoom Frickin Zoom
 
Sephitrask's Avatar
 
Join Date: May 2010
Location: Jacksonville, Fl
Posts: 408
Likes: 0
Received 0 Likes on 0 Posts
I decided to cheap out this past summer and bought an Ebay exhaust. The construction was great, welds looked good, so I thought I was ok. The big thing that gets neglected in these discussions is not the appearance, but the muffler internals. I did not take this into consideration and now am shopping for a new exhaust. I have basically destroyed the internals of one of the mufflers on the exhaust, and now it makes an embarrassing rattle every time I get on the throttle. Don't waste your money and your time; spend the extra $100-200 and get an exhaust designed to hold up against the extreme exhaust temps a Rotary puts out. I will be kicking myself for buying this for quite some time, dont make the same mistake.
Old 05-14-2012, 04:27 PM
  #31  
SARX Legend
iTrader: (46)
 
9krpmrx8's Avatar
 
Join Date: Jan 2007
Location: San Antonio, Texas
Posts: 33,784
Received 452 Likes on 366 Posts
Or just have a new muffler welded in place, or have the muffler repacked (good muffler packing is cheap) with better material

Cheap an easy fix either way.
Old 05-15-2012, 01:17 AM
  #32  
#225 of 1000
iTrader: (7)
 
EricB's Avatar
 
Join Date: Jul 2011
Location: Dirty Jerz
Posts: 2,134
Likes: 0
Received 5 Likes on 5 Posts
Originally Posted by Sephitrask
I decided to cheap out this past summer and bought an Ebay exhaust. The construction was great, welds looked good, so I thought I was ok. The big thing that gets neglected in these discussions is not the appearance, but the muffler internals. I did not take this into consideration and now am shopping for a new exhaust. I have basically destroyed the internals of one of the mufflers on the exhaust, and now it makes an embarrassing rattle every time I get on the throttle. Don't waste your money and your time; spend the extra $100-200 and get an exhaust designed to hold up against the extreme exhaust temps a Rotary puts out. I will be kicking myself for buying this for quite some time, dont make the same mistake.


after coming home from the grand-am race i noticed a similar rattle on my raceroots single.... ONLY when between idle and 1200rpm. im going to check it out tomorrow and im HOPING it is a loose something and a cheap easy fix...Really hoping it is the exhaust hanger, going to see if wrapping it does anything... From the drivers seat it almost sounds like its coming from the rear and the more i think about it, the more i think the exhaust is rattling against the diff cover.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
arexatemate
RX-8 Parts For Sale/Wanted
6
10-28-2019 08:16 AM
mdl0209
Series I Trouble Shooting
14
05-23-2019 05:46 PM
projectr13b
RX-8 Racing
20
05-14-2016 06:25 PM
DG07
New Member Forum
3
09-28-2015 10:58 AM
Jb4ker96
Series I Trouble Shooting
0
09-27-2015 10:06 PM



You have already rated this thread Rating: Thread Rating: 0 votes,  average.

Quick Reply: Is this exhaust worth getting?



All times are GMT -5. The time now is 10:21 AM.