Brettus

iTrader: (2)

then all it needs is some beefier fasteners - those plastic things pop out if with the slightest provocation .
Can have it's good points though - if you have a low speed collision they all just fly out like they were being unzipped . I've had several impacts to the front and found that all the plastic bits just pop back into place with a little persuasion .

eviltwinkie

Ran over a fawking dead armadillo last night on the way home...

I JUST FIXED IT TOD GAMNIT!!!

UGH...I'll take pictures if its cool enough...

XRX8X

alright you guys this is far out left field so no head shots!if you move the rad from it's present location to a possition closer to the grille and with more holes where the plate go's don't you think(just a guess) our temps should stay down a bit more?i'm just out of warrenty and this summer so far is rough.i sometimes look at the engine bay and think that if the rad was a foot closer to the air flow the heat would be easy to get out of the cramped air space.even a smaller but wider and more antifreeze holding rad should help out!again this is out of left field and i thought i'd chime in for a sec.!