Turbo /SC for AT/Euro low power??
05-03-2006, 03:24 AM
#1
Registered User
Thread Starter
Join Date: Sep 2004
Posts: 73
Likes: 0
Received 0 Likes
on
0 Posts
Turbo /SC for AT/Euro low power??
Has anyone installed a turbokit or a supercharger in the US automatic RX-8 or in the european low power version?
I've got a 192 Hp euro RX-8 and I would like to know if this conversion has been done before?
(As far as I know,the AT and the Euro LP is basicly the same engine)
I've got a 192 Hp euro RX-8 and I would like to know if this conversion has been done before?
(As far as I know,the AT and the Euro LP is basicly the same engine)
05-03-2006, 05:07 AM
#4
Registered User
Thread Starter
Join Date: Sep 2004
Posts: 73
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Petrus
I have the GReddy turbokit in my car. So I guess the RE-Amemiya turbokit will work just as good in a euro-AT as in any other AT.
Jag har en euro 5-växlad manuell
Det säljs ingen AT i Europa...
05-03-2006, 05:09 AM
#5
Registered User
Thread Starter
Join Date: Sep 2004
Posts: 73
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by KrisD1
Just talk to scott, he has done some I think.
Who is Scott?
I have the same engine as you.
It's also a manual transmission.Sorry I didn't write it,but there is no Euro AT..
Last edited by CaptainZoom; 05-03-2006 at 05:12 AM.
05-03-2006, 05:56 AM
#6
Registered User
Join Date: Aug 2004
Posts: 110
Likes: 0
Received 0 Likes
on
0 Posts
Amemiya do have a 4 port turbo for about £3k it produces aroun 280bhp according to the dyno, but i think it had a new exhust, filter and flywheel did post it all on the UK onwners before i was banned so it could still be on there if you take a look, it included the dyno and pictures!
sadly the dyno is no longer on Amemiya web site (well not that i can see and my Japanese isnt that good) but if you do decide to go that route keep us posted as i can get some very good shipping rates from that part of the world as i do a bit of importing here and there!
*edit* i was wrong they have updted the website again! *edit*
sadly the dyno is no longer on Amemiya web site (well not that i can see and my Japanese isnt that good) but if you do decide to go that route keep us posted as i can get some very good shipping rates from that part of the world as i do a bit of importing here and there!
*edit* i was wrong they have updted the website again! *edit*
Last edited by Mickeyblue; 05-03-2006 at 06:08 AM.
05-03-2006, 09:12 AM
#8
Registered User
Thread Starter
Join Date: Sep 2004
Posts: 73
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Moostafa29
Rick from Rotary Performance here in CA has a turbo'd AT 8. I think the only difference was some tweaking of the emangle.
05-11-2006, 04:03 PM
#10
Bummed, but bring on OU!
Originally Posted by Moostafa29
Rick from Rotary Performance here in CA has a turbo'd AT 8. I think the only difference was some tweaking of the emangle.
Thread
Thread Starter
Forum
Replies
Last Post