RX8 Performance Turbo Build
#26
Ah gotcha. Theoretically as long as the pressure from the turbo line is greater than the hydrostatic pressure from what's in the pan, the droop is negligible and it should be fine. But oil is super viscous and the return line is way bigger than the feed so I'm not sure if that's still the case. (Lots of pressure losses)
#27
Modulated Moderator
iTrader: (3)
Now that the intercooler was mounted and manifold was installed, it was time to install all the charge pipes. You may want to sand off the TIG weld nubs from assembly to aid in better sealing of the charge pipes. I capped the ends of the pips with paper towels then used a sanding attachment on a cordless drill to clean off the nubs fairly easily.
Those "nubs" were added to keep the couplers and clamps from slipping off
#28
SARX Legend
iTrader: (46)
Ah gotcha. Theoretically as long as the pressure from the turbo line is greater than the hydrostatic pressure from what's in the pan, the droop is negligible and it should be fine. But oil is super viscous and the return line is way bigger than the feed so I'm not sure if that's still the case. (Lots of pressure losses)
#30
Womp. Well there goes that haha. I can probably tig back on some of those after I get the swing of sheet aluminum again. I know on some of the pipes that was the only place the couple would sit and it made mad boost/vacuum leaks.
Last edited by discotech; 01-16-2016 at 12:52 AM.
#31
#37
SPOOLN8
iTrader: (1)
Join Date: Nov 2008
Location: Edmonton, Alberta, Canada
Posts: 2,225
Received 208 Likes
on
156 Posts
Seems like a HELL of a lot of modifications/fabrication required for a kit that is supposed to be bolt on.... Did Gregs kit follow the same routing/have the same fitment issues or is this because yours is a production kit? Doesn't he have aggressive wheels on his with no mention of not being able to turn the wheels completely?
Anyways man, you've got hella more skills in the shop than I do, cudos to you. My GReddy kit fit in as advertised so there wasn't really any surprises for me; hope it gives you many years of turbo greatness; I know I couldn't go back to no boost!
Anyways man, you've got hella more skills in the shop than I do, cudos to you. My GReddy kit fit in as advertised so there wasn't really any surprises for me; hope it gives you many years of turbo greatness; I know I couldn't go back to no boost!
#38
#39
Seems like a HELL of a lot of modifications/fabrication required for a kit that is supposed to be bolt on.... Did Gregs kit follow the same routing/have the same fitment issues or is this because yours is a production kit? Doesn't he have aggressive wheels on his with no mention of not being able to turn the wheels completely?
Anyways man, you've got hella more skills in the shop than I do, cudos to you. My GReddy kit fit in as advertised so there wasn't really any surprises for me; hope it gives you many years of turbo greatness; I know I couldn't go back to no boost!
Anyways man, you've got hella more skills in the shop than I do, cudos to you. My GReddy kit fit in as advertised so there wasn't really any surprises for me; hope it gives you many years of turbo greatness; I know I couldn't go back to no boost!
Thanks man, its been a wild ride. I just hope I was able to give some perspective on my install with this kit. It was a pain and a half, but I love it!
#42
Modulated Moderator
iTrader: (3)
Seems like a HELL of a lot of modifications/fabrication required for a kit that is supposed to be bolt on.... Did Gregs kit follow the same routing/have the same fitment issues or is this because yours is a production kit? Doesn't he have aggressive wheels on his with no mention of not being able to turn the wheels completely?
Anyways man, you've got hella more skills in the shop than I do, cudos to you. My GReddy kit fit in as advertised so there wasn't really any surprises for me; hope it gives you many years of turbo greatness; I know I couldn't go back to no boost!
Anyways man, you've got hella more skills in the shop than I do, cudos to you. My GReddy kit fit in as advertised so there wasn't really any surprises for me; hope it gives you many years of turbo greatness; I know I couldn't go back to no boost!
There is no way that a kit wouldn't require modifications to fit. The undertray and sides and battery box areas will always need to be modified. If you are adding aftermarket radiators and other peripherals you will run into unique problems as well.
You will never get a "bolt on" kit that won't require any modifications
#43
SPOOLN8
iTrader: (1)
Join Date: Nov 2008
Location: Edmonton, Alberta, Canada
Posts: 2,225
Received 208 Likes
on
156 Posts
There is no way that a kit wouldn't require modifications to fit. The undertray and sides and battery box areas will always need to be modified. If you are adding aftermarket radiators and other peripherals you will run into unique problems as well.
You will never get a "bolt on" kit that won't require any modifications
You will never get a "bolt on" kit that won't require any modifications
The difference being I was able to modify everything for my install with nothing more than a dremel. It seems as though the kit that this particular guy has had more than a few fitment issues, even compared to other RX8Performance kits. Not bashing or slamming his build in any way, just pointing out what I'm seeing in OP's posts. The Rx8Performance kit is one I'd one day love to try (especially after seeing Gregs) but I wouldn't have expected it to be any more difficult than the greddy kit to install, seems like this particular kit was "off" and if it was me in the OP's shoes I would have felt a bit overwhelmed if I thought I needed to go to the extent he did. Considering he can't turn his wheels completely I'd say there is something dimensionally wrong with this particular kit
#44
Boosted Kiwi
iTrader: (2)
I think Gregs didn't buy a complete kit as he used a few of the parts he already had so fitment was easier.
I have heard from another source in the UK where the guy had just as many issues as the OP in installing his ... if not more .
Suffice it to say that .... you are gunna need some skills to install this kit . I think the final outcome will be worth it though and I don't see anything better available on the market.
I have heard from another source in the UK where the guy had just as many issues as the OP in installing his ... if not more .
Suffice it to say that .... you are gunna need some skills to install this kit . I think the final outcome will be worth it though and I don't see anything better available on the market.
#49
Pull My Finger
iTrader: (7)
My turbo manifold didn't have any issues with fitment, I basically purchased a kit minus the inter cooler and piping so I could achieve a certain look in the engine bay. I really like the simplicity of the charge pipe running outside, mine takes some patience routing in the engine bay, having a low mount kit is no walk in the park especially when there is a larger frame turbo in such a small/tight area but this kit is well worth the effort.
#50
SPOOLN8
iTrader: (1)
Join Date: Nov 2008
Location: Edmonton, Alberta, Canada
Posts: 2,225
Received 208 Likes
on
156 Posts
Well if I was to go this route I would try and use as much as possible from my existing GReddy kit. I'm mainly interested in the manifold and larger turbo that can hold boost all the way to 9k. Still need to do more homework comparing this to an upgraded turbine/compressor (60-1 with 11 blade turbine) to my GReddy. Probably will come down to one option being much easier on the wallet than the other anyways
And with the Canadian dollar as god damned low as it is right now I won't even be considering this for a while yet.
Thanks for the info you guys with versions of this kit, time to do some more build thread reading I guess. Sorry about the thread jack OP!
And with the Canadian dollar as god damned low as it is right now I won't even be considering this for a while yet.
Thanks for the info you guys with versions of this kit, time to do some more build thread reading I guess. Sorry about the thread jack OP!
Last edited by RotaryMachineRx; 01-21-2016 at 08:03 AM.