RX8Club.com

RX8Club.com (https://www.rx8club.com/)
-   Series I Major Horsepower Upgrades (https://www.rx8club.com/series-i-major-horsepower-upgrades-93/)
-   -   New Turbo Kit! (https://www.rx8club.com/series-i-major-horsepower-upgrades-93/new-turbo-kit-88323/)

swoope 04-29-2006 05:27 AM


Originally Posted by SpeedForceRacing
From your impressive results.......your turbo is efficient under 5 psi and inefficient over 5psi? The turbo required for enough airflow at 7000-8000 rpms on a 1.3L rotary, with 10 to 1 compression, would be something along the lines of a T66. However, it is not efficient at 5 psi. I am just trying to figure this out is all.

https://www.rx8club.com/showpost.php...77&postcount=1

might what to help your own before you question others..

beers :beer:

Moostafa29 04-29-2006 10:22 AM

:pokeowned

BigOLundh 04-29-2006 01:29 PM

Scott,
I know this kit is still in the development phase, but using this new Turbo with the previous greddy setup can you attest to how much of a difference there is in Turbo lag and where the boost kicks in?

Thanks,
hS

Aseras 04-29-2006 01:46 PM

shit this is like seeing your parents wrap your christmas present and KNOWING you can't touch it until christmas, which is still a long time away :(

MazsportScott 05-01-2006 11:04 AM


Originally Posted by BigOLundh
Scott,
I know this kit is still in the development phase, but using this new Turbo with the previous greddy setup can you attest to how much of a difference there is in Turbo lag and where the boost kicks in?

Thanks,
hS

There is a very different feel to this setup. The Greddy turbo is pretty instant with spool-up and because of this it has a instant "hit" of torque to it, but because it's instant, CFM limits make it feel flat above say 6500rpm IMO. This setup feels more like an tradional T2/FD RX-7 with a good sized single turbo. It starts pulling with a very smooth jet taking off feel to it (love that smooth as silk rotary power) and doesn't stop pulling until you shift! Keep in mind that all testing to this point has been done using bushing turbo's so the spool-up with the optional ball bearing upgrade will be even better and have a longer service life to boot. Scott

Red Devil 05-01-2006 11:13 AM

Scott, I didn't see anywhere but have you released what turbo you are using yet?

MazsportScott 05-01-2006 11:19 AM

Not yet, ;) It will hold boost all the way to redline though:rock:

DARKMAZ8 05-01-2006 11:30 AM

does the turbo still mount in the greddy location?

BigOLundh 05-01-2006 11:50 AM

Thanks for the info Scott. That smooth spool is what the Dyno seemed to show as well. I was just wanting to double check.

Sounds Good!!!

-hS

DARKMAZ8 05-01-2006 11:52 AM

Price for entire kit with ems and ball bearing upgrade????

SpeedForceRacing 05-01-2006 01:11 PM


Originally Posted by swoope
https://www.rx8club.com/showpost.php...77&postcount=1

might what to help your own before you question others..

beers :beer:


Speed Force Racing only sells tuner kits or complete kits with the TSI.We cannot dictate what are resellers do and how they handle their customers.Now back to the topic.........



Tim

Petrus 05-01-2006 04:13 PM

So this "upgrade" or kit would theoreticly mean that one can buy "just" the turbo, ballbearing and Int-X and keep the other GReddy parts?

I must say that I´m very curious to see what turbo is used in this setup... cause I have looked for a bigger one myself to fit the area.

YOU GO SCOTT!!! NICE WORK! :bowdown: And please make sure this gets available to overseas customers as well.

unreal89 05-01-2006 07:38 PM

So the turbo sits in the same place as the greddy kit? I'm really confused on what this is exactly... a greddy upgrade, an new kit based on greddy design, or a repackaged greddy kit with upgrades. I wish I had money. :'(

FlyingLeggs 05-01-2006 08:18 PM

Scott, you've worked wonders once again. Good luck on completing the project.
Any chance you're going to have one to show off to the locals?? I'm 15 minutes away....

Bindon 05-01-2006 08:44 PM

Scott, looks beautiful.

*sigh* looks like im going to be poor yet again :-/

army_rx8 05-01-2006 08:51 PM

hmm just when i think i've made up my mind on what to get for my car...you go and do something like this :)

morkusyambo 05-03-2006 09:23 AM

Scott, How much for the entire kit w/all the bells and whistles, coming from NA?

rx8wannahave 05-03-2006 12:39 PM

Nice job Scott, you know I complain about the price...but you have done ALOT for my fellow RX8ers.

5psi for 300whp....WOW!!!!!!!

You deserve a... :djcelebra in your honor for all the hard work on the baby Renesis.

If I keep my 8, I might be able to convince my wife that a 6K Turbo kit is cheaper than a brand new car (lol).

It's just :yumyum: ...5psi = 300WHP. I'm like alot of folks here...that's all I would really want, that equals low 13's per the results we have seen here.

5psi is like NA with some spice...lol :rofl:

rx8wannahave 05-04-2006 07:30 AM

A quick question, while you might not be done testing this thing to be able to say for sure, since you are using a bigger turbo have you noticed any lagg issues or more lagg than the Greddy?

cjkim 05-04-2006 07:51 AM


Originally Posted by rx8wannahave
A quick question, while you might not be done testing this thing to be able to say for sure, since you are using a bigger turbo have you noticed any lagg issues or more lagg than the Greddy?


Originally Posted by MazsportScott
There is a very different feel to this setup. The Greddy turbo is pretty instant with spool-up and because of this it has a instant "hit" of torque to it, but because it's instant, CFM limits make it feel flat above say 6500rpm IMO. This setup feels more like an tradional T2/FD RX-7 with a good sized single turbo. It starts pulling with a very smooth jet taking off feel to it (love that smooth as silk rotary power) and doesn't stop pulling until you shift! Keep in mind that all testing to this point has been done using bushing turbo's so the spool-up with the optional ball bearing upgrade will be even better and have a longer service life to boot. Scott

:rock:

guy321 05-04-2006 09:06 AM

Do what I did and get a bike, mine's slow but still doesn 12 sec 1/4 miles.. I know you have a new baby and all so I'll even buy you some duct tape so you can ride him around! :ylsuper:


Originally Posted by rx8wannahave
Nice job Scott, you know I complain about the price...but you have done ALOT for my fellow RX8ers.

5psi for 300whp....WOW!!!!!!!

You deserve a... :djcelebra in your honor for all the hard work on the baby Renesis.

If I keep my 8, I might be able to convince my wife that a 6K Turbo kit is cheaper than a brand new car (lol).

It's just :yumyum: ...5psi = 300WHP. I'm like alot of folks here...that's all I would really want, that equals low 13's per the results we have seen here.

5psi is like NA with some spice...lol :rofl:


epitrochoid 05-04-2006 10:19 AM

alan, i'll trade you a drive in my car if I can ride your bike..

wait..i've never driven a motorcycle before...damn

Skythe 05-04-2006 10:32 AM

:scratchhe I'm wondering if the progress on this kit will influence the release of the PTP kit......or at least the release of new information

mike1324a 05-04-2006 01:02 PM


Originally Posted by guy321
Do what I did and get a bike, mine's slow but still doesn 12 sec 1/4 miles.. I know you have a new baby and all so I'll even buy you some duct tape so you can ride him around! :ylsuper:

HAHAHA that was the craziest story i have heard in a long time! what a retard!

ALXVA8 05-04-2006 01:06 PM


Originally Posted by Skythe
:scratchhe I'm wondering if the progress on this kit will influence the release of the PTP kit......or at least the release of new information

I was actually wondering the same thing.


All times are GMT -5. The time now is 09:47 AM.


© 2024 MH Sub I, LLC dba Internet Brands