Need help passing inspection!! What do I need to get rid of CEL?
The sad truth is there are plenty of people here ignorant enough to believe your self serving BS. Your only objection is that you not only don't get to sell him a new AP unit if he does it that way, he or whoever he eventually sells it to won't be a slave to hiring you to make changes to the locked tuning file in the future.
Because of the way an IntX integrates with the OE tune means that it can also integrate with a Cobb AP using the Cobb supplied OE tune. There's really nothing complex about it. Once you setup the Cobb OE tune with whatever settings you want like cooling fans, CEL control, etc and load it you are done. The IntX will still function WRT control and tuning no different than If it was working with a factory tune.
None.
From what I understand he just needs someone well versed in AP tuning to spend up to a full day of dyno runs and tuning to get it settled in... assuming everything is kosher with his setup.
not at all. present = install ap with base map and mask cel once he figures out what a cel is. future = pull the microtech and go ap with a good tuner.
obtuse is a type of triangle. lets try to keep it to that.
obtuse is a type of triangle. lets try to keep it to that.
Just plugging it in and installing the "Stock-style" or "Stage I" calibration won't do it.
Why didn't you read the rest of that thread before you quoted it out of context?
Oh, that's right, you just do things to please your own sense of self-importance, not to actually contribute. I forgot.
Last edited by MazdaManiac; Jul 3, 2011 at 02:33 PM.
Thread Starter
Registered User
Joined: Apr 2011
Posts: 91
Likes: 0
Yes that's exactly what I'm trying to do. I want to load up the base AP map to mask the CEL and then after that I plan on totally removing the microtech once esmeril releases there AP compatible setup. I have Kane flying in on the 15th to tune my microtech but he may also be able to help install the AP too
Thread Starter
Registered User
Joined: Apr 2011
Posts: 91
Likes: 0
If he has the AccessPORT calibration setup for his application and requirements.
Just plugging it in and installing the "Stock-style" or "Stage I" calibration won't do it.
Why didn't you read the rest of that thread before you quoted it out of context?
Oh, that's right, you just do
things to please your own sense
of self-importance, not to
actually contribute. I forgot.
Just plugging it in and installing the "Stock-style" or "Stage I" calibration won't do it.
Why didn't you read the rest of that thread before you quoted it out of context?
Oh, that's right, you just do
things to please your own sense
of self-importance, not to
actually contribute. I forgot.
I did read the whole thing. It wasn't the first time, which is why I knew where to find it. His question that you both quoted and responded to is very specific. If you meant something different then it certainly wasn't stated or made clear in any way. I am no different than yourself. I contribute when I want to and don't when I don't want to.
Thread
Thread Starter
Forum
Replies
Last Post
Shankapotamus3
Series I Trouble Shooting
28
Mar 14, 2021 03:53 PM
nferguson88
RX-8 Parts For Sale/Wanted
1
Oct 6, 2015 12:45 PM
Evan Gray
Series I Trouble Shooting
0
Sep 26, 2015 12:30 PM
