Finally finished my nitrous build, thought I would share the pictures with you guys and answer any questions you might have! Most of the pictures are straight forward. Mounted everything to the stock airbox tray for convenience. I have the full size pictures that I can post on request. I autoresized most of them.

For picture below: Complete look from the front:


Look from left side under intake.


Look from right side under intake.


From rear, driver side.


The purge system mounted on the grounding bolt with the hard line pointing out the side vent.


Nozzle mounted into the Black Halo Racing Throttle Body Spacer.


Aeromotive Fuel Line Tap, which was 6AN so had to reduce to 4AN hence the blue connectors.


Remote Bottle Opener clears the bar by about 3 inches.


Picture of bottle, mounts, heater and opener.


Interior, tray lid closed for stealth mode, lol.


Tray lid open, doesn't look great right now but the covering vinyl still yet to be cut and applied is on the passenger seat.


When switches are on, rings turn blue. From left to right bottle heater toggle, control box arm toggle, purge momentary and the Glowshift Pressure Gauge.
Despite the picture, the colors of the switches are exactly the same.


Thanks for checking it out!

 

Wondering why none of the pictures are working....

 

sub'd ... can't wait to see the pics

 

Pictures Fixed!

 

Looks awesome
Luv that nitrous gauge pod ash tray mod (WIN)

 

Thanks a ton. I went though a lot of plastic to get it the way it is now, lol. I've got the blue vinyl to lay over it to make it look extra pro.

 

wow looks clean! Congrats!

 

Thank you very much!

 

The lights on the purge are very weak because of how much power the purge pulls, so I'm going to put in a relay to brighten them up. If that doesn't work then I'll replace them.